Chapter 2 Stress and Strain -- Axial Loading Statics

0 Downloads 14 Views

Mechanics of Materials – deals with deformable bodies. -- Need to know the deformation of a boy under various stress/strain state. -- Allowing us to computer forces for statically indeterminate problems. The following subjects will be discussed: Stress-Strain Diagrams. Modulus of Elasticity. Brittle vs Ductile Fracture.

Comments

Recommend documents

2 stress and strain—axial loading

Later chapters will deal with torsional and pure bending loads. ... Strength is affected by alloying, heat treating, and manufacturing process but stiffness ( Modulus ...

Axial Loading

We have seen normal stress and normal strain concepts in axially loaded members,. ➢ Here in this chapter, we will learn a method to calculate deformations in these members,. ➢ This method ... In this case, average normal stress ... Note that there are concentrated forces at both ends of the bar, as well as distributed axial ...

CHAPTER – I Simple stress & strain

STRESS. 11. The resultant of the internal forces for an axially loaded member is normal to a section cut perpendicular to the member axis. The force intensity on that section is defined as the normal stress. STRESS. 12. Illustrative Problem. A composite bar consists of an aluminum section rigidly fastened between a bronze ...

Stress, Strain, and Viscosity

A viscous fluid is defined by the relationship of stress to strain rate. L σ = 2με . Viscosity (μ) is the constant of proportionality (units of Pas). This “constitutive” ...

stress and strain - FreeStudy

multiples kPa, MPa and GPa. Areas may be calculated in mm. 2 and units of stress in N/mm. 2 are quite acceptable. Since 1 N/mm. 2 converts to 1 000 000 N/ m.

Stress and Strain Tensors – Deformation and Strain

Deformation and Strain Displacement & Deformation Deformation: An alteration of shape, as by pressure or stress. Example: Displacement: A vector or the magnitude of a ...

Statics Chapter 2 - TurboTeamHu

Statics. Chapter 2. Force Vectors. Eng. Iqbal Marie [email protected] Engineering Mechanics, Statics, 13th edition ; R. C. Hibbeler. Page 2. Force Vectors. 2.1 Scalar and Vectors. Scalar: is a quantity which has magnitude only. Examples of scalars: speed, distance, energy, charge, volume, mass and temperature. . Vectors ...