Chrysler-Dodge-Plymouth “LA” V-8 64-87 67-86 318 …

125kB Size 4 Downloads 0 Views

160 CRANECAMS.COM 273-340-360 (5.9L) and Chrysler-Dodge-Plymouth “LA” V-8 64-87 67-86 318 (5.2L) cu.in COMPLETE CAM SPECIFICATIONS Application
Chrysler-Dodge-Plymouth “LA” V-8 64-87

273-340-360 (5.9L) and 67-86 318 (5.2L) cu.in

COMPLETE CAM SPECIFICATIONS Application

Camshaft Series/ Grind Number

Mechanical Lifter Camshafts

CAMSHAFTS

Good low end and mid range torque and HP, fair idle, moderate performance usage, bracket racing, 34003800 cruise RPM, 10.0 to 11.5 compression ratio advised.

F-238/3200-2-14

Good mid range torque, performance usage, limited oval track 1/4-3/8 mile, bracket racing w/heavy car, serious off road, auto trans w/2500+ converter, 10.5 to 12.0 compression ratio advised.

F-244/3454-2S-6

RPM Camshaft POWER PART NUMBER/ RANGE Emissions Code 26006400

691191*

32006800

690921*

690911*

F-256/383-2S-8

36007400

690931*

238 248

300 310

114

10 48 63 5

.022 .480 .022 .500

99260-16

244 252

280 288

106

19 45 55 17

.026 .518 .026 .536

99260-16

248 258

284 294

108

21 47 62 16

.026 .540 .026 .560

99260-16

256 260

312 316

108

25 51 63 17

.014 .575 .016 .585

99260-16

258 268

294 304

108

26 52 67 21

.026 .560 .026 .580

99260-16

262 264

294 296

110

26 56 67 17

.018 .591 .018 .596

99260-16

268 278

304 314

108

31 57 72 26

.026 .580 .026 .600

99260-16

274 288

306 324

108

34 60 75 33

.018 .618 .026 .620

99260-16

278 278

314 314

108

36 62 72 26

.026 .600 .026 .600

99260-16

288 288

324 324

108

41 67 77 31

.026 .620 .026 .620

3

3

Good mid range and upper RPM torque and HP, rough F-258/3735-2-8 idle, performance usage, bracket racing, 340+ cu.in., auto trans w/2500+ converter, 11.0 to 12.5 compression ratio advised. Good upper RPM torque and HP, moderate competition only, bracket racing, 360+ cu.in., auto trans w/3000+ converter, good w/ plate nitrous system, aluminum cylinder heads recommended, 12.0 minimum compression ratio advised. Good upper RPM torque and HP,moderate competition only, bracket racing, 360+ cu.in., auto trans w/3000+ converter, 12.0 minimum compression ratio advised.

F-262/394-2S-10

Competition only, good upper RPM torque and HP, auto trans w/3500+ converter, good with manifold nitrous system, 360+ cu.in., 12.5 minimum compression ratio advised.

F-274/412-2S-8

36007200

691381* 3

38007600

691391* 3

F-268/3868-2-8

40007600

691561* 3

42008000

691571* 3

Competition only, good upper RPM HP, auto trans F-278/4002-8 w/3500+ converter, 360+ cu.in., 12.5 minimum compression ratio advised.

44008000

F-288/4134-8

50008400

RPM range shown is for average usage. These cam profiles will RPM higher, depending upon application. NOTE: To effect valve adjustment, 318, 340 and 360 engines require the use of Crane Adjustable Rocker Arms and appropriate pushrods when using mechanical lifter cams.

160

99260-16

3 32007000

Radical competition only, maximum performance applications, flat tappet restricted classes, aluminum cylinder heads advised, 13.5 minimum compression ratio advised.

LIFTERS

Degrees Advertised Open/Close Lash Gross Duration Degrees Degrees @ .050” Hot Lift @ .050” Duration Lobe Cam Lift Int. Int. Int/Exh. Int/Exh. Separation Int/Exh Exh. Exh.

3

Good mid range torque and HP, rough idle, performance F-248/3602-2-8 usage, limited oval track, bracket racing, serious off road, auto trans w/2000+ converter, 10.5 to 12.0 compression ratio advised. Performance usage, great mid range torque and HP, bracket racing, 340+ cu.in., auto trans w/2500+ converter, 11.0 to 12.5 compression ratio advised.

See pg. 293

691701* 3 691951* 3

NOTE: Early 1986-91 318 (5.2L) and early 1987-91 360 (5.9L) engines are equipped with hydraulic roller camshafts and lifters. Conventional hydraulic, mechanical, or roller camshafts and lifters can be installed in these engines, providing the appropriate kit components are used.

CRANECAMS.COM

*This product is applicable only to pre-1966 California and pre-1968 federally certified passenger cars. It is also applicable to non-emission controlled trucks and similar vehicles. It is not applicable or intended for use on any emission controlled vehicles operated on highways or roads.

Custom Grind Cams Also Available – Call 866-388-5120 or go to cranecams.com for ordering information CRANE VALVE TRAIN COMPONENTS See pg. 358

See pg. 337

VALVE SPRING AND RETAINER KITS

a b c d e

See pg. 350

See pg. 362

See pg. 360

See pg. 306

See pg. 328

See pg. 312

VALVE SPRINGS

RETAINERS

VALVE STEM SEALS

VALVE STEM LOCKS

99838-16a

99948-16

99838-16a

PUSHRODS

TIMING CHAIN AND GEAR ASSEMBLY

CAST ROCKER ARMS

99822-16a

69622-16b

69975-1*c

69770-16d 69771-16*e

69790-1f 69791-1*g

99948-16

99822-16a

69622-16b

69975-1*c

69770-16d 69771-16*e

69790-1f 69791-1*g

99838-16a

99948-16

99822-16a

69622-16b

69975-1*c

69770-16d 69771-16*e

69790-1f 69791-1*g

99838-16a

99948-16

99822-16a

69622-16b

69975-1*c

69770-16d 69771-16*e

69790-1f 69791-1*g

99838-16a

99948-16

99822-16a

69622-16b

69975-1*c

69770-16d 69771-16*e

69790-1f 69791-1*g

99838-16a

99948-16

99822-16a

69622-16b

69975-1*c

69770-16d 69771-16*e

69790-1f 69791-1*g

99838-16a

99948-16

99822-16a

69622-16b

69975-1*c

69770-16d 69771-16*e

69790-1f 69791-1*g

99838-16a

99948-16

99822-16a

69622-16b

69975-1*c

69770-16d 69771-16*e

69790-1f 69791-1*g

99838-16a

99948-16

99822-16a

69622-16b

69975-1*c

69770-16d 69771-16*e

69790-1f 69791-1*g

99838-16a

99948-16

99822-16a

69622-16b

69975-1*c

69770-16d 69771-16*e

69790-1f 69791-1*g

Must machine cylinder heads. Heavy wall, heat treated, for use with adjustable rocker arms. Performance steel billet gears and roller chain set. 1.5 ratio iron rocker arms, adjustable, must use appropriate Crane pushrods (shafts not included). 1.6 ratio iron rocker arms, adjustable, must use appropriate Crane pushrods (shafts not included).

See pg. 315

See pg. 320

__ ALUMINUM ROCKERS __ CRANE CLASSIC/ GOLD ENERGIZER RACE

f 1.5 ratio aluminum rocker arm kit with rocker shafts, adjustable, must use appropriate Crane pushrods. g 1.6 ratio aluminum rocker arm kit with rocker shafts, adjustable, must use appropriate Crane pushrods.

866-388-5120 • 386-236-9983 FAX

161

Comments