section d – asme flanged ball valves - conbraco.com

22MB Size 2 Downloads 53 Views

Jun 29, 2016 ... **Any imported products are identified as “Apollo International”. SECTION D – ASME FLANGED BALL VALVES. SERIES. DESCRIPTION.
SECTION D - ASME FLANGED BALL VALVES TABLE OF CONTENTS SERIES

CLASS 150 CARBON STEEL 88A-100 Series 88A-200 Series 88B-100 Series 88L-140 Series 88L-240 Series STAINLESS STEEL 87A-100 Series 87A-200 Series 87B-100 Series DUPLEX STAINLESS STEEL 87J-100 Series 87J-200 Series SUPER DUPLEX STAINLESS STEEL 87K-100 Series 87K-200 Series ALLOY 87A-400 Series 87A-500 Series TITANIUM 87T-100 Series 87T-200 Series CLASS 300 CARBON STEEL 88A-700 Series 88A-900 Series 88L-740 Series 88L-940 Series STAINLESS STEEL 87A-700 Series 87A-900 Series DUPLEX STAINLESS STEEL 87J-700 Series 87J-900 Series SUPER DUPLEX STAINLESS STEEL 87K-700 Series 87K-900 Series TITANIUM 87T-700 Series 87T-900 Series CLASS 600 CARBON STEEL 88A-F00 Series 88L-F40 Series STAINLESS STEEL 87A-F00 Series

“Apollo” Flow Controls

DESCRIPTION

PAGE

Features & Benefits Available Variations

D-3 D-4

ASME Class 150 Flanged Carbon Steel ASME Class 150 Flanged Full Port Carbon Steel ASME Class 150 Flanged Uni-Body Carbon Steel ASME Class 150 Flanged Low Temp Carbon Steel ASME Class 150 Flanged Full Port Low Temp Carbon Steel

D-55-58 D-59-62 D-71-72 D-73-76 D-77-80

ASME Class 150 Flanged Stainless Steel ASME Class 150 Flanged Full Port Stainless Steel ASME Class 150 Flanged Uni-Body Stainless Steel

D-5-8 D-9-12 D-21-22

Duplex ASME Class 150 Flanged Stainless Steel Duplex ASME Class 150 Flanged Full Port Stainless Steel

D-23-26 D-27-30

Super Duplex ASME Class 150 Flanged Stainless Steel Super Duplex ASME Class 150 Flanged Full Port Stainless Steel

D-39-42 D-43-46

ASME Class 150 Flanged Alloy 20 ASME Class 150 Flanged Full Port Alloy 20

D-89-91 D-92-94

ASME Class 150 Flanged Titanium ASME Class 150 Flanged Full Port Titanium

D-110-113 D-114-117

ASME Class 300 Flanged Carbon Steel ASME Class 300 Flanged Full Port Carbon Steel ASME Class 300 Flanged Low Temp Carbon Steel ASME Class 300 Flanged Full Port Low Temp Carbon Steel

D-63-66 D-67-70 D-81-84 D-85-88

ASME Class 300 Flanged Stainless Steel ASME Class 300 Flanged Full Port Stainless Steel

D-13-16 D-17-20

Duplex ASME Class 300 Flanged Stainless Steel Duplex ASME Class 300 Flanged Full Port Stainless Steel

D-31-34 D-35-38

Super Duplex ASME Class 300 Flanged Stainless Steel Super Duplex ASME Class 300 Flanged Full Port Stainless Steel

D-47-50 D-51-54

ASME Class 300 Flanged Titanium ASME Class 300 Flanged Full Port Titanium

D-118-121 D-122-125

ASME Class 600 Flanged Full Port Carbon Steel ASME Class 600 Flanged Full Port Low Temp Carbon Steel

D-100-104 D-105-109

ASME Class 600 Flanged Full Port Stainless Steel

D-95-99

industrial.apollovalves.com

Customer Service (704) 841-6000

D-1

SECTION D - ASME FLANGED BALL VALVES

D-2

Customer Service (704) 841-6000

www.apolloflowcontrols.com

“Apollo” Flow Controls

ASME FLANGED BALL VALVES FEATURES & BENEFITS 87A, 87A-F, 87B, 88A, 88A-F, 88B, 88L, & 88L-F SERIES STANDARDS COMPLIANCE

Except where specifically noted all valves within this family of products complies with the requirements of this listed standard. • ASME B16.5 ”Pipe Flanges and Flanged Fittings” • ASME B16.10 ”Face to Face Dimensions of Valves” • ASME B16.34 ”Valves - Flanged, Threaded, and Welding End” • ASME B16.33 “Manual Operated Metallic Gas Valves for Use in Gas Piping Systems up to 125 psig” • ASME B16.38 “Large Metallic Valves for Gas Distribution (Manually Operated NPS 2.5” to 12”, 125 psig)” • ASME B31.1 “Power Piping” • ASME B31.3 “Chemical Plant and Petroleum Refinery Piping” • ASME B31.8 “Gas Transmission and Distribution Piping Systems” • API 607 ”Fire Test - Soft Seated Quarter Turn Valves” (-24 Option Required). See specific tech sheet for 5th or 6th edition. • API 608 ”Ball Valves - Flanged, Threaded, and Welding End” • MSS SP-25 ”Standard Marking System for Valves” • MSS SP-61 ”Pressure Testing of Steel Valves” • MSS SP-72 ”Ball Valves with Flanged or Buttweld Ends” • UL 125 “Valves for Anhydrous Ammonia and LP-Gas (Other than Safety Relief)” • NSF/ANSI 61 Section 8, Annex G (1/2” to 4” 87A Series) • NSF-372 Drinking Water System Components - Lead Content (1/2” to 4” 87A Series)

STANDARD FEATURES

Except where specifically noted all valves within this family of products include all listed features as standard. • Two Position Locking Device (Valves 6” Full Port, 8” Standard Port and smaller) • Chevron Style Adjustable Stem Seals • ISO 5211 Mounting Pad Bolt Pattern • Slot Vented Ball for Thermal Expansion • Rated up to 150 psig Saturated Steam: ASME Class 150, 300, & 600 Valves • Rated up to 250 psig Saturated Steam: ASME Class 300 Valves Require the -65 Option • ASME Class 600 Valves Require the -24-80 Options or -38 Option • Anti-static Grounded Ball and Stem • Blowout-Proof Stem Design • Cast Boss for Bleed / Drain Port • Vacuum Service to 29 inches of Hg • NACE MR0175 (2000) Compliance on all 87A/87B/88A/88B/88L Valves with SS Ball & Stem • NACE MR0103 (2003) Compliance on all 87A/87B/88A/88B/88L Valves with SS Ball & Stem

PRODUCT APPROVALS

• CSA* (Reference: ASME B16.33 & B16.38) ASME Class 150 & 300 only • UL* (Reference: Control Number 195H) ASME Class 150 & 300 only UL (YSDT) LP-Gas Shut-Off Valves UL (MHKZ) Manual Valves UL (YRBX) Flammable Liquid Shut-Off Valves UL (YRPV) Gas Shut-Off Valves UL (YQNZ) Compressed Gas Shut-Off Valves UL (YQAR) Anhydrous Ammonia Shut-Off Valves *Requires “UL” suffix for markings.

“Apollo” Flow Controls

• CE Marking(with “-CE” suffix): Marking is available with all the flanged ball valves listed below • 87A • 88A • 87A (Alloy 20) • 88B • 87B • 88L • 87C • 87G • 87J • 87K • 87M • 87R

industrial.apollovalves.com

Customer Service (704) 841-6000

D-3

ASME FLANGED BALL VALVES AVAILABLE VARIATIONS VARIATIONS AVAILABLE REFERENCE DATA:

ALLOY SERIES FLANGED BALL VALVES

SIZE

PORT

ANSI CLASS

DIMENSIONAL DATA PAGE

STAINLESS STEEL

ALLOY 20

HASTELLOY*

NICKEL*

NI-CU*

1.5” & 2”

Standard

150

D-1

87A-10X

87A-40X

87H-1HX

87N-1NX

87M-13X

2.5” & 3”

Standard

150

D-2

87A-10X

87A-40X

87H-1HX

87N-1NX

N/A

4”, 6” & 8”

Standard

150

D-3

87A-10X

87A-40X

87H-1HX

87N-1NX

N/A

10”

Standard

150

D-4

87A-10X

87A-40X

87H-1HX

87N-1NX

N/A

1/2”, 3/4” & 1”

Full

150

D-5

87A-20X

87A-50X

87H-2HX

87N-2NX

87M-23X

1.5”, 2” & 2.5”

Full

150

D-6

87A-20X

87A-50X

87H-2HX

87N-2NX

87M-23X

3”, 4”, & 6”

Full

150

D-7

87A-20X

87A-50X

87H-2HX

87N-2NX

N/A

8”, 10” & 12”

Full

150

D-8

87A-20X

87A-50X

87H-2HX

87N-2NX

N/A

1.5” & 2”

Standard

300

D-9

87A-70X

87A-80X

87H-7HX

87N-7NX

N/A

2.5” & 3”

Standard

300

D-10

87A-70X

87A-80X

87H-7HX

87N-7NX

N/A

4”, 6” & 8”

Standard

300

D-11

87A-70X

87A-80X

87H-7HX

87N-7NX

N/A

10”

Standard

300

D-12

87A-70X

87A-80X

87H-7HX

87N-7NX

N/A

1/2”, 3/4” & 1”

Full

300

D-13

87A-90X

87A-60X

87H-9HX

87N-9NX

87M-93X

1.5”, 2” & 2.5”

Full

300

D-14

87A-90X

87A-60X

87H-9HX

87N-9NX

87M-93X

3”, 4”, & 6”

Full

300

D-15

87A-90X

87A-60X

87H-9HX

87N-9NX

N/A

8”, 10” & 12”

Full

300

D-16

87A-90X

87A-60X

87H-9HX

87N-9NX

N/A

* Minimum Quantities May Apply

ALLOY MATERIAL OF CONSTRUCTION FOR PRESSURE CONTAINING/RETAINING COMPONENTS ALLOY Valve Series Body Retainer

Ball Stem Fasteners

STAINLESS STEEL

ALLOY 20

HASTELLOY*

NICKEL*

NI-CU ALLOY*

87A-100/200,

87A-400/500,

87H-1H0/2H0,

87N-1N0/2N0,

87M-130/230,

87A-700/900

87A-600/800

87H-7H0/9H0

87N-7N0/9N0

87M-730/930

A351-CF8M

A351-CN7M

A494-CW12MW

A494-CZ100

A494-M35-1

A351-CF8M or

A351-CN7M or

A494-CW12MW

A494-CZ100 or

A494-M35-1 or

A276-316

B473-N08020

or B574-C276

B160-200

B164-K400

A351-CF8M or

A351-CN7M or

A494-CW12MW

A494-CZ100 or

A494-M35-1 or

A276-316

B473-N08020

or B574-C276

B160-200

B164-K400

A276-316

B473-N08020

B574-C276

B160-200

B164-K400

A193-B8M,

A193-B8M,

A193-B8M,

A193-B8M,

A193-B8M,

A194-Gr8

A194-Gr8

A194-Gr8

A194-Gr8

A194-Gr8

* Minimum Quantities May Apply

D-4

Customer Service (704) 841-6000

www.apolloflowcontrols.com

“Apollo” Flow Controls

87A-100 SERIES STAINLESS STEEL ASME CLASS 150 FLANGED STD. PORT BALL VALVE - 1.5” THRU 2” FOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3. STANDARD MATERIAL LIST

VARIATIONS AVAILABLE

PART 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18

• • • •

MATERIAL

Body Retainer Ball Stem Packing Gland Stem Seals Seats Gland Screws Gland Plate Stem Nut Lever Stem Bearing Stop Stop Screw Lock Plate Body Seal Lockwasher Grounding Spring

ASTM A351 CF8M ASTM A276 Type 316 ASTM A276 Type 316 ASTM A276 Type 316 ASTM A276 Type 316 PTFE RPTFE ASTM A193 B8 Class 1 302 or 304 SS 316 SS 302 or 304 SS with Vinyl Grip RPTFE ASTM A276 Type 316 18-8 SS 302 or 304 SS RPTFE 302 or 304 SS SS

87H - Hastelloy 87M - Monel (1.5” to 2” only) 87N - Nickel 87S - 304L SS

OPTIONS AVAILABLE: (MORE INFORMATION IN SECTION J)

• Minimum quantities apply • To specify an option, replace the “01” standard suffix with the suffix of the option. • To specify multiple options, replace the “01” suffix with the desired suffixes in the numerical order shown below. NOTE: Not all suffixes can be combined together. (SUFFIX)

OPTION

-01 -04-14-15-21-

Standard Configuration 2.25” Stem Extension (Carbon Steel, Zinc Plated) Side Vented Ball (Uni-Directional) Wheel Handle, Steel UHMWPE Seats Graphite packing, spiral wound graphite body seal, RPTFE bearing (API 607, 6th edition, ISO 10497:2010) PTFE Seats and Seals PEEK Seats and Graphite Packing No Lubrication. Assembled Dry. Oxygen Cleaned MPTFE Seats and Graphite Packing (Fire Safe) Drilled and Tapped Purge Port with Plug 4” Extended Bonnet 316 SS Spiral Wound Gaskets w/PTFE Filler Live Loaded (Lever) Live Loaded (Gear, Actuator) Multi-Seal (Super TFE) 87A/88A Series Flat Face Flanges Double Packed 4” Extended Bonnet Double Packed 4” Extended Bonnet with Monitoring Port CE Marking. See Page D-3 “Product Approvals” for availability. Garlock EVSP Stem Packing w/Spiral Wound Graphite Gasket (Fire Safe by Design) PCTFE Stem Bearing Positive Material Identification With Test Certificate Tested to API Spec 6D UL & CSA Listed (w/Markings)

-24-35-38-49-57-65-69-70-73-76-77-80-82-90-9P-CE-EP-KF-MP-TC-TD-UL-

Pressure/Temperature Ratings - Page M-9, Graph No. 2

ACTUATOR MOUNTING

DIMENSIONS PRODUCT NUMBER 87A-107-01 87A-108-01

SIZE

A

B

C

D

1.5”

1.25

6.50

3.50

2”

1.50

7.00

3.69

“Apollo” Flow Controls

E

F

G

4.85

6.53

0.47

1.85

4.62

6.65

0.72

2.41

H

I

J

K

L

M

N

WT.

2.38

1.392

0.696

0.500

0.287

1/4-20

1.50

9

3.09

1.949

0.974

0.625

0.412

5/16-18

2.00

18

REV. 04MAY17 industrial.apollovalves.com

Customer Service (704) 841-6000

D-5

87A-100 SERIES STAINLESS STEEL ASME CLASS 150 FLANGED STD. PORT BALL VALVE - 2.5” THRU 3” FOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3. STANDARD MATERIAL LIST

VARIATIONS AVAILABLE

PART 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20

• 87H - Hastelloy • 87N - Nickel • 87S - 304L SS

MATERIAL

Body Retainer Ball Stem Packing Gland Stem Seals Seats Gland Screws Gland Plate Stem Nut Lever Stem Bearing Stop Stop Screw Lock Plate Body Seal Grounding Spring Body Joint Stud Body Joint Nut Lockwasher

ASTM A351 CF8M ASTM A351 CF8M ASTM A276 Type 316 or A351 CF8M ASTM A276 Type 316 ASTM A276 Type 316 PTFE RPTFE ASTM A193 B8 Class 1 316 SS 18-8 SS 316 SS RPTFE ASTM A276 Type 316 316 SS 302 or 304 SS RPTFE SS ASTM A193 Grade B8M ASTM A194 Grade 8 302 or 304 SS

OPTIONS AVAILABLE: (MORE INFORMATION IN SECTION J)

• Minimum quantities apply • To specify an option, replace the “01” standard suffix with the suffix of the option. • To specify multiple options, replace the “01” suffix with the desired suffixes in the numerical order shown below. NOTE: Not all suffixes can be combined together. (SUFFIX)

OPTION

-01 -04-14-21-

Standard Configuration 2.25” Stem Extension (Carbon Steel, Zinc Plated) Side Vented Ball (Uni-Directional) UHMWPE Seats Graphite packing, spiral wound graphite body seal, RPTFE bearing (API 607, 6th edition, ISO 10497:2010) PTFE Seats and Seals PEEK Seats and Graphite Packing No Lubrication. Assembled Dry. Oxygen Cleaned MPTFE Seats and Graphite Packing (Fire Safe) Cleaned For Industrial Gases Drilled and Tapped Purge Port with Plugs 4” Extended Bonnet 316 SS Spiral Wound Gaskets w/PTFE Filler Live Loaded 87A/88A Series (Lever) Live Loaded (Gear, Actuator) Multi-Seal (Super TFE) 87A/88A Series Flat Face Flanges Double Packed 4” Extended Bonnet Double Packed 4” Extended Bonnet with Monitoring Port CE Marking. See Page D-3 “Product Approvals” for availability. Garlock EVSP Stem Packing w/Spiral Wound Graphite Gasket (Fire Safe by Design) PCTFE Stem Bearing Gear Operator with Standard Handwheel Gear Operator with Standard Handwheel & Locking Device Gear Operator with Oversize Handwheel Gear Operator with Oversize Handwheel & Locking Device Positive Material Identification With Test Certificate Tested to API Spec 6D UL & CSA Listed (w/Markings)

-24-35-38-49-57-65-67-69-70-73-76-77-80-82-90-9P-CE-EP-KF-MG-MH-MJ-MK-MP-TC-TD-UL-

Pressure/Temperature Ratings - Page M-9, Graph No. 2

ACTUATOR MOUNTING

DIMENSIONS PRODUCT NUMBER 87A-109-01 87A-100-01

SIZE

A

B

C

2.5” 3”

D

E

F

2.00

7.50

2.50

8.00

G

H

I

J

K

L

M

3.50

5.61

8.41

3.51

6.24

8.41

0.80

3.31

4.08

1.949

0.974

0.750

0.477

5/16-18

2.50

27

0.80

3.94

4.71

1.949

0.974

0.750

0.477

5/16-18

3.00

34

REV. 04MAY17 D-6

Customer Service (704) 841-6000

www.apolloflowcontrols.com

N

WT.

“Apollo” Flow Controls

87A-100 SERIES STAINLESS STEEL ASME CLASS 150 FLANGED STD. PORT BALL VALVE - 4” THRU 8” FOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3. STANDARD MATERIAL LIST

VARIATIONS AVAILABLE

PART 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21

• 87H - Hastelloy • 87N - Nickel • 87S - 304L SS

MATERIAL

Body Retainer Ball Stem Packing Gland Stem Seals Seats Gland Screws Gland Plate Adapter Screw Handle Adapter Stem Bearing Stop Stop Screw Lock Plate Body Seal Grounding Spring Body Joint Stud Body Joint Nut Lockwasher Pipe Handle

ASTM A351 CF8M ASTM A351 CF8M ASTM A276 Type 316 or A351 CF8M ASTM A276 Type 316 ASTM A276 Type 316 PTFE RPTFE ASTM A193 B8 Class 1 316 SS 18-8 SS 316 SS RPTFE ASTM A276 Type 316 316 SS 302 or 304 SS RPTFE SS ASTM A193 Grade B8M ASTM A194 Grade 8 302 or 304 SS Galvanized Steel (not Shown)

OPTIONS AVAILABLE: (MORE INFORMATION IN SECTION J)

• Minimum quantities apply • To specify an option, replace the “01” standard suffix with the suffix of the option. • To specify multiple options, replace the “01” suffix with the desired suffixes in the numerical order shown below. NOTE: Not all suffixes can be combined together. (SUFFIX)

OPTION

-01 -14-21-

Standard Configuration Side Vented Ball (Uni-Directional) UHMWPE Seats Graphite packing, spiral wound graphite body seal, RPTFE bearing (API 607, 6th edition, ISO 10497:2010) PTFE Seats and Seals No Lubrication. Assembled Dry. Oxygen Cleaned MPTFE Seats and Graphite Packing (Fire Safe) Cleaned For Industrial Gases Drilled and Tapped Purge Ports with Plugs Extended Bonnet 316 SS Spiral Wound Gaskets w/PTFE Filler Live Loaded (Lever) Live Loaded (Gear, Actuator) Multi-Seal (Super TFE) 87A/88A Series Flat Face Flanges Double Packed 4” Extended Bonnet Double Packed 4” Extended Bonnet with Monitoring Port CE Marking. See Page D-3 “Product Approvals” for availability. Garlock EVSP Stem Packing w/Spiral Wound Graphite Gasket (Fire Safe by Design) PCTFE Stem Bearing Gear Operator with Standard Handwheel Gear Operator with Standard Handwheel & Locking Device Gear Operator with Oversize Handwheel Gear Operator with Oversize Handwheel & Locking Device Positive Material Identification With Test Certificate Tested to API Spec 6D UL & CSA Listed (w/Markings)

-24-35-49-57-65-67-69-70-73-76-77-80-82-90-9P-CE-EP-KF-MG-MH-MJ-MK-MP-TC-TD-UL-

Pressure/Temperature Ratings - Page M-9, Graph No. 2

ACTUATOR MOUNTING

DIMENSIONS PRODUCT NUMBER 87A-10A-01

SIZE

A

B

C

D

E

F

G

H

I

J

K

L

M

N

WT.

4”

3.00

9.00

4.18

8.80

3.88

0.50

4.75

5.95

2.840

1.420

1.250

0.725

3/8-16

4.00

73

87A-10C-01

6”

4.00

10.50

4.69

9.99

5.13

0.50

5.94

7.13

2.840

1.420

1.250

0.725

3/8-16

6.00

117

87A-10E-01

8”

6.00

18.00

9.00

13.73

7.00

1.00

7.75

9.48

4.596

2.298

2.000

1.375

3/4-10

8.00

310

“Apollo” Flow Controls

REV. 04MAY17 industrial.apollovalves.com

Customer Service (704) 841-6000

D-7

87A-100 SERIES STAINLESS STEEL ASME CLASS 150 FLANGED STD. PORT BALL VALVE - 10” FOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3. STANDARD MATERIAL LIST

VARIATIONS AVAILABLE

PART 1 2 3 4 5 6 7 8 9 10 11 12 13

• 87H - Hastelloy • 87N - Nickel • 87S - 304L SS

MATERIAL

Body Retainer Ball Stem Packing Gland Stem Seals Seats Gland Screws Gland Plate Stem Bearing Body Seal Body Joint Stud Body Joint Nut

ASTM A351 CF8M ASTM A351 CF8M ASTM A276 Type 316 or A351 CF8M ASTM A276 Type 316 ASTM A276 Type 316 PTFE RPTFE ASTM A193 B8 Class 1 316 SS RPTFE RPTFE ASTM A193 Grade B8M ASTM A194 Grade 8

OPTIONS AVAILABLE: (MORE INFORMATION IN SECTION J)

• Minimum quantities apply • To specify an option, replace the “01” standard suffix with the suffix of the option. • To specify multiple options, replace the “01” suffix with the desired suffixes in the numerical order shown below. NOTE: Not all suffixes can be combined together. (SUFFIX)

OPTION

-01 -14-21-

Standard Configuration Side Vented Ball (Uni-Directional) UHMWPE Seats Graphite packing, spiral wound graphite body seal, RPTFE bearing (API 607, 6th edition, ISO 10497:2010) PTFE Seats and Seals No Lubrication. Assembled Dry. Oxygen Cleaned MPTFE Seats and Graphite Packing (Fire Safe) Drilled and Tapped Purge Port with Plugs 4” Extended Bonnet Live Loaded 87A/88A Series (Gear, Actuator) Multi-Seal (Super TFE) Flat Face Flanges Double Packed 4” Extended Bonnet Double Packed 4” Extended Bonnet with Monitoring Port CE Marking. See Page D-3 “Product Approvals” for availability. Garlock EVSP Stem Packing w/Spiral Wound Graphite Gasket (Fire Safe by Design) PCTFE Stem Bearing Gear Operator with Standard Handwheel Gear Operator with Standard Handwheel & Locking Device Gear Operator with Oversize Handwheel Gear Operator with Oversize Handwheel & Locking Device Positive Material Identification With Test Certificate Tested to API Spec 6D UL & CSA Listed (w/Markings)

-24-35-49-57-65-69-70-77-80-82-90-9P-CE-EP-KF-MG-MH-MJ-MK-MP-TC-TD-UL-

ACTUATOR MOUNTING

Pressure/Temperature Ratings - Page M-9, Graph No. 2

DIMENSIONS PRODUCT NUMBER 87A-10G-01

SIZE

A

B

C

D

E

F

G

H

I

J

K

L

M

WT.

10”

8.00

21.00

10.37

12.83

9.18

1.00

10.22

4.596

2.298

2.000

1.375

3/4-10

10.00

526

REV. 04MAY17 D-8

Customer Service (704) 841-6000

www.apolloflowcontrols.com

“Apollo” Flow Controls

87A-200 SERIES STAINLESS STEEL ASME CLASS 150 FLANGED FULL PORT BALL VALVE - 1/2” THRU 1” FOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3. STANDARD MATERIAL LIST

VARIATIONS AVAILABLE

PART (1/2” & 3/4” VALVES) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

Body Retainer Ball Stem Packing Gland Stem Seals Seats Stem Nut Lever Stem Bearing Stop Body Seal Lockwasher Grounding Spring Grounding Spring

ASTM A351 CF8M ASTM A276 Type 316 ASTM A276 Type 316 ASTM A276 Type 316 ASTM A276 Type 316 PTFE RPTFE 300 Series Stainless Steel 300 Series Stainless Steel w/ Vinyl Grip RPTFE 300 Series Stainless Steel RPTFE 300 Series Stainless Steel ASTM A313 Stainless Steel ASTM A313 Stainless Steel

PART (1” VALVES) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18

• • • •

MATERIAL

OPTIONS AVAILABLE: (MORE INFORMATION IN SECTION J)

• Minimum quantities apply • To specify an option, replace the “01” standard suffix with the suffix of the option. • To specify multiple options, replace the “01” suffix with the desired suffixes in the numerical order shown below. NOTE: Not all suffixes can be combined together. (SUFFIX)

OPTION

-01 -04-14-15-21-

Standard Configuration 2.25” Stem Extension (Carbon Steel, Zinc Plated) Side Vented Ball (Uni-Directional) Wheel Handle, Steel UHMWPE Seats Graphite packing, spiral wound graphite body seal, RPTFE bearing (API 607, 6th edition, ISO 10497:2010) PTFE Seats and Seals PEEK Seats and Graphite Packing No Lubrication. Assembled Dry. Oxygen Cleaned MPTFE Seats and Graphite Packing (Fire Safe) Drilled and Tapped Purge Port with Plugs 4” Extended Bonnet 316 SS Spiral Wound Gaskets w/PTFE Filler Live Loaded (Lever) Live Loaded (Gear, Actuator) Multi-Seal (Super TFE) Flat Face Flanges Double Packed 4” Extended Bonnet Double Packed 4” Extended Bonnet with Monitoring Port CE Marking. See Page D-3 “Product Approvals” for availability. Garlock EVSP Stem Packing w/Spiral Wound Graphite Gasket (Fire Safe by Design) PCTFE Stem Bearing Positive Material Identification With Test Certificate Tested to API Spec 6D UL & CSA Listed (w/Markings)

-24-

MATERIAL

Body Retainer Ball Stem Packing Gland Stem Seals Seats Gland Screws Gland Plate Stem Nut Lever Stem Bearing Stop Stop Screw Lock Plate Body Seal Lockwasher Grounding Spring

87H - Hastelloy 87M - Monel 87N - Nickel 87S - 304L SS

ASTM A351 CF8M ASTM A276 Type 316 ASTM A276 Type 316 ASTM A276 Type 316 ASTM A276 Type 316 PTFE RPTFE ASTM A193 B8 Class 1 302 or 304 SS 316 SS 302 or 304 with Vinyl Grip RPTFE ASTM A276 Type 316 18-8 SS 302 or 304 SS RPTFE 302 or 304 SS SS

-35-38-49-57-65-69-70-73-76-77-80-82-90-9P-CE-EP-KF-MP-TC-TD-UL-

Pressure/Temperature Ratings - Page M-9, Graph No. 2

1/2” & 3/4” VALVES

1” VALVE

DIMENSIONS PRODUCT NUMBER 87A-203-01

SIZE

A

B

C

D

E

F

G

H

I

J

K

L

M

WT.

1/2”

0.50

4.25

2.06

3.31

5.11

0.30

1.09

1.41

1.00

0.500

0.375

0.245

10-24

5

87A-204-01

3/4”

0.75

4.62

2.18

3.89

5.53

0.36

1.65

1.99

1.392

0.696

0.500

0.287

1/4-20

6

87A-205-01

1”

1.00

5.00

2.32

4.62

6.53

0.47

1.62

2.15

1.392

0.696

0.500

0.287

1/4-20

7

“Apollo” Flow Controls

REV. 04MAY17 industrial.apollovalves.com

Customer Service (704) 841-6000

D-9

87A-200 SERIES STAINLESS STEEL ASME CLASS 150 FLANGED FULL PORT BALL VALVE - 1.5” THRU 2.5” FOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3. STANDARD MATERIAL LIST

VARIATIONS AVAILABLE

PART 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20

• • • •

MATERIAL

Body Retainer Ball Stem Packing Gland Stem Seals Seats Gland Screws Gland Plate Adapter Screw Lever Stem Bearing Stop Stop Screw Lock Plate Body Seal Grounding Spring Body Joint Stud Body Joint Nut Lockwasher

ASTM A351 CF8M ASTM A351 CF8M ASTM A276 Type 316 or A351 CF8M ASTM A276 Type 316 ASTM A276 Type 316 PTFE RPTFE ASTM A193 B8 Class 1 316 SS 18-8 SS 316 SS RPTFE ASTM A276 Type 316 316 SS 302 or 304 SS RPTFE SS ASTM A193 Grade B8M ASTM A194 Grade 8 302 or 304 SS

87H - Hastelloy 87M - Monel 87N - Nickel 87S - 304L SS

OPTIONS AVAILABLE: (MORE INFORMATION IN SECTION J)

• Minimum quantities apply • To specify an option, replace the “01” standard suffix with the suffix of the option. • To specify multiple options, replace the “01” suffix with the desired suffixes in the numerical order shown below. NOTE: Not all suffixes can be combined together. (SUFFIX)

-01 -04-14-21-24-35-38-49-57-65-69-70-73-76-77-80-82-MG-90-9P-CE-EP-KF-MH-MJ-MK-MP-TC-TD-UL-

ACTUATOR MOUNTING

OPTION

Standard Configuration 2.25” Stem Extension (Carbon Steel, Zinc Plated) (up to 2.5”) Side Vented Ball (Uni-Directional) UHMWPE Seats Graphite packing, spiral wound graphite body seal, RPTFE bearing (API 607, 6th edition, ISO 10497:2010) PTFE Seats and Seals PEEK Seats and Graphite Packing No Lubrication. Assembled Dry. Oxygen Cleaned MPTFE Seats and Graphite Packing (Fire Safe) Drilled and Tapped Purge Ports with Plugs 4” Extended Bonnet 316 SS Spiral Wound Gaskets w/PTFE Filler Live Loaded (Lever) Live Loaded (Gear, Actuator) Multi-Seal (Super TFE) Flat Face Flanges Gear Operator with Standard Handwheel Double Packed 4” Extended Bonnet Double Packed 4” Extended Bonnet with Monitoring Port CE Marking. See Page D-3 “Product Approvals” for availability. Garlock EVSP Stem Packing w/Spiral Wound Graphite Gasket (Fire Safe by Design) PCTFE Stem Bearing Gear Operator with Standard Handwheel & Locking Device Gear Operator with Oversize Handwheel Gear Operator with Oversize Handwheel & Locking Device Positive Material Identification With Test Certificate Tested to API Spec 6D UL & CSA Listed (w/Markings)

Pressure/Temperature Ratings - Page M-9, Graph No. 2

DIMENSIONS PRODUCT NUMBER 87A-207-01

SIZE

A

B

C

D

E

F

G

H

I

K

L

M

WT.

1.5”

1.50

6.50

3.00

4.62

6.65

0.72

2.41

3.09

1.949

0.974

0.625

0.412

5/16-18

14

87A-208-01

2”

2.00

7.00

3.04

5.61

8.41

0.80

3.31

4.08

1.949

0.974

0.750

0.477

5/16-18

25

87A-209-01

2.5”

2.50

7.50

3.34

6.24

8.41

0.80

3.94

4.71

1.949

0.974

0.750

0.477

5/16-18

30

REV. 04MAY17 D-10

J

Customer Service (704) 841-6000

www.apolloflowcontrols.com

“Apollo” Flow Controls

87A-200 SERIES STAINLESS STEEL ASME CLASS 150 FLANGED FULL PORT BALL VALVE - 3” THRU 6” FOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3. STANDARD MATERIAL LIST

VARIATIONS AVAILABLE

PART 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20

• 87H - Hastelloy • 87N - Nickel • 87S - 304L SS

MATERIAL

Body Retainer Ball Stem Packing Gland Stem Seals Seats Gland Screws Gland Plate Adapter Screw Handle Adapter Stem Bearing Stop Stop Screw Lock Plate Body Seal Grounding Spring Body Joint Stud Body Joint Nut Pipe Handle

ASTM A351 CF8M ASTM A351 CF8M ASTM A276 Type 316 or A351 CF8M ASTM A276 Type 316 ASTM A276 Type 316 PTFE RPTFE ASTM A193 B8 Class 1 316 SS 18-8 SS 316 with Vinyl Grip RPTFE ASTM A276 Type 316 316 SS 302 or 304 SS RPTFE SS ASTM A193 Grade B8M ASTM A194 Grade 8 Galvanized Steel (not shown)

OPTIONS AVAILABLE: (MORE INFORMATION IN SECTION J)

• Minimum quantities apply • To specify an option, replace the “01” standard suffix with the suffix of the option • To specify multiple options, replace the “01” suffix with the desired suffixes in the numerical order shown below. NOTE: Not all suffixes can be combined together. (SUFFIX)

OPTION

-01 -14-21-

Standard Configuration Side Vented Ball (Uni-Directional) UHMWPE Seats Graphite packing, spiral wound graphite body seal, RPTFE bearing (API 607, 6th edition, ISO 10497:2010) PTFE Seats and Seals PEEK Seatsand Graphite Packing No Lubrication. Assembled Dry Oxygen Cleaned MPTFESeats and Graphite Packing (Fire Safe) Drilled and Tapped Purge Ports with Plugs 4” Extended Bonnet 316SS Spiral Wound Gaskets w/ PTFE Filler Live Loaded (Lever) Live Loaded (Gear,Actuator) Multi-Seal (Super TFE) Flat Face Flanges Double Packed 4” Extended Bonnet Double Packed 4” Extended Bonnet with Monitoring Port CE Marking. See Page D-3 “Product Approvals” for availability. Garlock EVSP Stem Packing w/Spiral Wound Graphite Gasket (Fire Safe by Design) PCTFE Stem Bearing Gear Operator with Standard Handwheel Gear Operator with Standard Handwheel& Locking Device Gear Operator with Oversize Handwheel Gear Operator with Oversize Handwheel & LockingDevice Positive Material Identification With Test Certificate Tested to API Spec 6D UL & CSA Listed (w/Markings)

-24-35-38-49-57-65-69-70-73-76-77-80-82-90-9P-CE-EP-KF-MG-MH-MJ-MK-MP-TC-TD-UL-

Pressure/Temperature Ratings - Page M-9, Graph No. 2

ACTUATOR MOUNTING

DIMENSIONS PRODUCT NUMBER 87A-200-01

SIZE

A

B

C

D

E

F

G

H

I

J

K

L

M

WT. 60

3”

3.00

8.00

3.68

8.80

3.88

0.50

4.75

5.95

2.840

1.420

1.250

0.725

3/8-16

87A-20A-01

4”

4.00

9.00

3.94

9.99

5.13

0.50

5.94

7.13

2.840

1.420

1.250

0.725

3/8-16

91

87A-20C-01

6”

6.00

15.50

7.19

13.73

7.00

1.00

7.75

9.48

4.596

2.298

2.000

1.375

3/4-10

248

“Apollo” Flow Controls

REV. 04MAY17 industrial.apollovalves.com

Customer Service (704) 841-6000

D-11

87A-200 SERIES STAINLESS STEEL ASME CLASS 150 FLANGED FULL PORT BALL VALVE - 8” THRU 12” FOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3. STANDARD MATERIAL LIST

VARIATIONS AVAILABLE

PART 1 2 3 4 5 6 7 8 9 10 11 12 13

• 87H - Hastelloy • 87N - Nickel • 87S - 304L SS

MATERIAL

Body Retainer Ball Stem Packing Gland Stem Seals Seats Gland Screws Gland Plate Stem Bearing Body Seal Body Joint Stud Body Joint Nut

ASTM A351 CF8M ASTM A351 CF8M ASTM A276 Type 316 or A351 CF8M ASTM A276 Type 316 ASTM A276 Type 316 PTFE RPTFE ASTM A193 B8 Class 1 316 SS RPTFE RPTFE ASTM A193 Grade B8M ASTM A194 Grade 8

OPTIONS AVAILABLE: (MORE INFORMATION IN SECTION J)

• Minimum quantities apply • To specify an option, replace the “01” standard suffix with the suffix of the option. • To specify multiple options, replace the “01” suffix with the desired suffixes in the numerical order shown below. NOTE: Not all suffixes can be combined together. (SUFFIX)

OPTION

-01 -14-21-

Standard Configuration Side Vented Ball (Uni-Directional) UHMWPE Seats Graphite packing, spiral wound graphite body seal, RPTFE bearing (API 607, 6th edition, ISO 10497:2010) PTFE Seats and Seals No Lubrication. Assembled Dry. Oxygen Cleaned MPTFE Seats and Graphite Packing (Fire Safe) Drilled and Tapped Purge Ports with Plugs 4” Extended Bonnet (8” Only) Live Loaded (Gear, Actuator) Multi-Seal (Super TFE) Flat Face Flanges Double Packed 4” Extended Bonnet Double Packed 4” Extended Bonnet with Monitoring Port CE Marking. See Page D-3 “Product Approvals” for availability. Garlock EVSP Stem Packing w/Spiral Wound Graphite Gasket (Fire Safe by Design) PCTFE Stem Bearing Gear Operator with Standard Handwheel Gear Operator with Standard Handwheel & Locking Device Gear Operator with Oversize Handwheel Gear Operator with Oversize Handwheel & Locking Device Positive Material Identification With Test Certificate Tested to API Spec 6D UL & CSA Listed (w/Markings)

-24-35-49-57-65-69-70-77-80-82-90-9P-CE-EP-KF-MG-MH-MJ-MK-MP-TC-TD-UL-

ACTUATOR MOUNTING

Pressure/Temperature Ratings - Page M-9, Graph No. 2

10” & 12”

8”

DIMENSIONS PRODUCT NUMBER 87A-20E-01

SIZE

A

B

C

D

E

F

G

8”

8.00

18.00

8.88

12.83

9.18

1.00

10.22

87A-20G-01

10”

10.00

21.00

10.26

18.57

11.33

2.31

12.80

87A-20H-01

12”

12.00

24.00

12.09

20.31

13.40

2.31

14.92

REV. 04MAY17 D-12

Customer Service (704) 841-6000

www.apolloflowcontrols.com

“Apollo” Flow Controls

87A-700 SERIES STAINLESS STEEL ASME CLASS 300 FLANGED STD. PORT BALL VALVE - 1.5” THRU 2” FOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3. STANDARD MATERIAL LIST

VARIATIONS AVAILABLE

PART 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18

• • • •

MATERIAL

Body Retainer Ball Stem Packing Gland Stem Seals Seats Gland Screws Gland Plate Stem Nut Lever Stem Bearing Stop Stop Screw Lock Plate Body Seal Lockwasher Grounding Spring

ASTM A351 CF8M ASTM A276 Type 316 ASTM A276 Type 316 ASTM A276 Type 316 ASTM A276 Type 316 PTFE RPTFE ASTM A193 B8 Class 1 302 & 304 SS 316 SS 302 & 304 SS with Vinyl Grip RPTFE ASTM A276 Type 316 18-8 SS 302 or 304 SS RPTFE 302 or 304 SS SS

87H - Hastelloy 87M - Monel 87N - Nickel 87S - 304L SS

OPTIONS AVAILABLE: (MORE INFORMATION IN SECTION J)

• Minimum quantities apply • To specify an option, replace the “01” standard suffix with the suffix of the option. • To specify multiple options, replace the “01” suffix with the desired suffixes in the numerical order shown below. NOTE: Not all suffixes can be combined together. (SUFFIX)

OPTION

-01 -04-14-15-21-

Standard Configuration 2.25” Stem Extension (Carbon Steel, Zinc Plated) Side Vented Ball (See Page J-2) Wheel Handle, Steel UHMWPE Seats Graphite packing, spiral wound graphite body seal, RPTFE bearing (API 607, 6th edition, ISO 10497:2010) PTFE Seats and Seals PEEK Seats and Graphite Packing No Lubrication. Assembled Dry. Oxygen Cleaned MPTFE Seats and Graphite Packing (Fire Safe) Drilled and Tapped Purge Ports with Plugs 4” Extended Bonnet 316 SS Spiral Wound Gaskets w/PTFE Filler Live Loaded (Lever) Live Loaded (Gear, Actuator) Multi-Seal (Super TFE) Flat Face Flanges Double Packed 4” Extended Bonnet Double Packed 4” Extended Bonnet with Monitoring Port CE Marking. See Page D-3 “Product Approvals” for availability. Garlock EVSP Stem Packing w/Spiral Wound Graphite Gasket (Fire Safe by Design) PCTFE Stem Bearing Positive Material Identification With Test Certificate Tested to API Spec 6D UL & CSA Listed (w/Markings)

-24-35-38-49-57-65-69-70-73-76-77-80-82-90-9P-CE-EP-KF-MP-TC-TD-UL-

Pressure/Temperature Ratings - Page M-11, Graph No. 6

ACTUATOR MOUNTING

DIMENSIONS PRODUCT NUMBER 87A-707-01A 87A-708-01

SIZE

A

B

C

D

E

F

G

H

I

J

K

L

M

N

WT.

1.5”

1.25

7.50

4.50

4.85

6.53

0.47

1.85

2.38

1.392

0.696

0.500

0.287

1/4-20

1.50

15.7

2”

1.50

8.50

5.19

4.62

6.65

0.72

2.41

3.09

1.949

0.974

0.625

0.412

5/16-18

2.00

24.0

“Apollo” Flow Controls

REV. 04MAY17 industrial.apollovalves.com

Customer Service (704) 841-6000

D-13

87A-700 SERIES STAINLESS STEEL ASME CLASS 300 FLANGED STD. PORT BALL VALVE - 2.5” THRU 3” FOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3. STANDARD MATERIAL LIST VARIATIONS AVAILABLE PART 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20

• 87H - Hastelloy • 87N - Nickel • 87S - 304L SS

MATERIAL

Body Retainer Ball Stem Packing Gland Stem Seals Seats Gland Screws Gland Plate Stem Nut Lever Stem Bearing Stop Stop Screw Lock Plate Body Seal Grounding Spring Body Joint Stud Body Joint Nut Lockwasher

ASTM A351 CF8M ASTM A351 CF8M ASTM A276 Type 316 or A351 CF8M ASTM A276 Type 316 ASTM A276 Type 316 PTFE RPTFE ASTM A193 B8 Class 1 316 SS 18-8 SS 316 with Vinyl Grip RPTFE ASTM A276 Type 316 316 SS 302 or 304 SS RPTFE SS ASTM A193 Grade B8M ASTM A194 Grade 8 302 or 304 SS

OPTIONS AVAILABLE: (MORE INFORMATION IN SECTION J)

• Minimum quantities apply • To specify an option, replace the “01” standard suffix with the suffix of the option. • To specify multiple options, replace the “01” suffix with the desired suffixes in the numerical order shown below. NOTE: Not all suffixes can be combined together. (SUFFIX)

-01 -04-14-21-24-35-38-49-57-65-69-70-73-76-77-80-82-90-9P-CE-EP-KF-MG-MH-MJ-MK-MP-TC-TD-UL-

OPTION

Standard Configuration 2.25” Stem Extension (Carbon Steel, Zinc Plated) (2.5” only) Side Vented Ball (Uni-Directional) UHMWPE Seats Graphite packing, spiral wound graphite body seal, RPTFE bearing (API 607, 6th edition, ISO 10497:2010) PTFE Seats and Seals PEEK Seats and Graphite Packing No Lubrication. Assembled Dry. Oxygen Cleaned MPTFE Seats and Graphite Packing (Fire Safe) Drilled and Tapped Purge Ports with Plugs 4” Extended Bonnet 316 SS Spiral Wound Gaskets w/PTFE Filler Live Loaded (Lever) Live Loaded (Gear, Actuator) Multi-Seal (Super TFE) Flat Face Flanges Double Packed 4” Extended Bonnet Double Packed 4” Extended Bonnet with Monitoring Port CE Marking. See Page D-3 “Product Approvals” for availability. Garlock EVSP Stem Packing w/Spiral Wound Graphite Gasket (Fire Safe by Design) PCTFE Stem Bearing Gear Operator with Standard Handwheel Gear Operator with Standard Handwheel & Locking Device Gear Operator with Oversize Handwheel Gear Operator with Oversize Handwheel & Locking Device Positive Material Identification With Test Certificate Tested to API Spec 6D UL & CSA Listed (w/Markings)

Pressure/Temperature Ratings - Page M-11, Graph No. 6

ACTUATOR MOUNTING

DIMENSIONS PRODUCT NUMBER 87A-709-01 87A-700-01

SIZE

A

B

2.5”

2.00

9.50

3”

2.50

11.12

C

D

E

F

G

H

I

J

K

L

M

4.75

5.61

8.41

5.56

6.24

8.41

0.80

3.31

4.08

1.949

0.974

0.750

0.477

0.80

3.94

4.71

1.949

0.974

0.750

0.477

REV. 04MAY17 D-14

Customer Service (704) 841-6000

www.apolloflowcontrols.com

N

WT.

5/16-18

2.50

39

5/16-18

3.00

55

“Apollo” Flow Controls

87A-700 SERIES STAINLESS STEEL ASME CLASS 300 FLANGED STD. PORT BALL VALVE - 4” THRU 8” FOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3. STANDARD MATERIAL LIST VARIATIONS AVAILABLE PART 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21

• 87H - Hastelloy • 87N - Nickel • 87S - 304L SS

MATERIAL

Body Retainer Ball Stem Packing Gland Stem Seals Seats Gland Screws Gland Plate Adapter Screw Handle Adapter Stem Bearing Stop Stop Screw Lock Plate Body Seal Grounding Spring Body Joint Stud Body Joint Nut Adapter Screw Pipe Handle

ASTM A351 CF8M ASTM A276 Type 316 ASTM A276 Type 316 or A351 CF8M ASTM A276 Type 316 ASTM A276 Type 316 PTFE RPTFE ASTM A193 B8 Class 1 316 SS 18-8 SS 316 SS RPTFE ASTM A276 Type 316 316 SS 302 or 304 SS RPTFE SS ASTM A193 Grade B8M ASTM A194 Grade 8 18-8 SS Galvanized Steel (not shown)

OPTIONS AVAILABLE: (MORE INFORMATION IN SECTION J)

• Minimum quantities apply • To specify an option, replace the “01” standard suffix with the suffix of the option. • To specify multiple options, replace the “01” suffix with the desired suffixes in the numerical order shown below. NOTE: Not all suffixes can be combined together. (SUFFIX)

OPTION

-01 -14-21-

Standard Configuration Side Vented Ball (Uni-Directional) UHMWPE Seats Graphite packing, spiral wound graphite body seal, RPTFE bearing (API 607, 6th edition, ISO 10497:2010) PTFE Seats and Seals No Lubrication. Assembled Dry. Oxygen Cleaned MPTFE Seats and Graphite Packing (Fire Safe) Drilled and Tapped Purge Ports with Plugs 4” Extended Bonnet 316 SS Spiral Wound Gaskets w/PTFE Filler Live Loaded (Lever) Live Loaded (Gear, Actuator) Multi-Seal (Super TFE) Flat Face Flanges Double Packed 4” Extended Bonnet Double Packed 4” Extended Bonnet with Monitoring Port CE Marking. See Page D-3 “Product Approvals” for availability. Garlock EVSP Stem Packing w/Spiral Wound Graphite Gasket (Fire Safe by Design) PCTFE Stem Bearing Gear Operator with Standard Handwheel Gear Operator with Standard Handwheel & Locking Device Gear Operator with Oversize Handwheel Gear Operator with Oversize Handwheel & Locking Device Positive Material Identification With Test Certificate Tested to API Spec 6D UL & CSA Listed (w/Markings)

-24-35-49-57-65-69-70-73-76-77-80-82-90-9P-CE-EP-KF-MG-MH-MJ-MK-MP-TC-TD-UL-

Pressure/Temperature Ratings - Page M-11, Graph No. 6

ACTUATOR MOUNTING

DIMENSIONS PRODUCT NUMBER 87A-70A-01

SIZE

A

B

C

D

E

F

G

H

I

J

K

L

M

N

WT.

4”

3.00

12.00

5.68

8.80

4.06

0.50

4.75

5.95

2.840

1.420

1.250

0.725

3/8-16

4.00

95

87A-70C-01

6”

4.00

15.88

7.38

9.99

5.25

0.50

5.94

7.13

2.840

1.420

1.250

0.725

3/8-16

6.00

187

87A-70E-01

8”

6.00

19.75

9.00

13.73

7.30

1.00

7.75

9.48

4.596

2.298

2.000

1.375

3/4-10

8.00

400

“Apollo” Flow Controls

REV. 04MAY17 industrial.apollovalves.com

Customer Service (704) 841-6000

D-15

87A-700 SERIES STAINLESS STEEL ASME CLASS 300 FLANGED STD. PORT BALL VALVE - 10” FOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3. STANDARD MATERIAL LIST

VARIATIONS AVAILABLE

PART 1 2 3 4 5 6 7 8 9 10 11 12 13

• 87H - Hastelloy • 87N - Nickel • 87S - 304L SS

MATERIAL

Body Retainer Ball Stem Packing Gland Stem Seals Seats Gland Screws Gland Plate Stem Bearing Body Seal Body Joint Stud Body Joint Nut

ASTM A351 CF8M ASTM A351 CF8M ASTM A276 Type 316 or A351 CF8M ASTM A276 Type 316 ASTM A276 Type 316 PTFE RPTFE ASTM A193 B8 Class 1 316 SS RPTFE RPTFE ASTM A193 Grade B8M ASTM A194 Grade 8

OPTIONS AVAILABLE: (MORE INFORMATION IN SECTION J)

• Minimum quantities apply • To specify an option, replace the “01” standard suffix with the suffix of the option. • To specify multiple options, replace the “01” suffix with the desired suffixes in the numerical order shown below. NOTE: Not all suffixes can be combined together. (SUFFIX)

OPTION

-01 -14-21-

Standard Configuration (Less Gear Operator) Side Vented Ball (See Page J2) UHMWPE Seats Graphite packing, spiral wound graphite body seal, RPTFE bearing (API 607, 6th edition, ISO 10497:2010) PTFE Seats and Seals No Lubrication. Assembled Dry. Oxygen Cleaned MPTFE Seats and Graphite Packing (Fire Safe) Drilled and Tapped Purge Ports with Plugs 4” Extended Bonnet Live Loaded 87A/88A Series (Gear, Actuator) Multi-Seal (Super TFE) 87A/88A Series Flat Face Flanges Double Packed 4” Extended Bonnet Double Packed 4” Extended Bonnet with Monitoring Port CE Marking. See Page D-3 “Product Approvals” for availability. Garlock EVSP Stem Packing w/Spiral Wound Graphite Gasket (Fire Safe by Design) PCTFE Stem Bearing Gear Operator with Standard Handwheel Gear Operator with Standard Handwheel & Locking Device Gear Operator with Oversize Handwheel Gear Operator with Oversize Handwheel & Locking Device Positive Material Identification With Test Certificate Tested to API Spec 6D UL & CSA Listed (w/Markings)

-24-35-49-57-65-69-70-77-80-82-90-9P-CE-EP-KF-MG-MH-MJ-MK-MP-TC-TD-UL-

ACTUATOR MOUNTING

Pressure/Temperature Ratings - Page M-11, Graph No. 6

DIMENSIONS PRODUCT NUMBER 87A-70G-01

SIZE

A

B

C

D

E

F

G

H

I

J

K

L

M

10”

8.00

22.38

10.69

12.83

9.56

1.00

10.22

4.596

2.298

2.000

1.375

3/4-10

10.00

REV. 04MAY17 D-16

Customer Service (704) 841-6000

www.apolloflowcontrols.com

“Apollo” Flow Controls

87A-900 SERIES STAINLESS STEEL ASME CLASS 300 FLANGED FULL PORT BALL VALVE - 1/2” THRU 1” FOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3. STANDARD MATERIAL LIST

VARIATIONS AVAILABLE

PART (1/2” & 3/4” VALVES) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

Body Retainer Ball Stem Packing Gland Stem Seals Seats Stem Nut Lever Stem Bearing Stop Body Seal Lockwasher Grounding Spring Grounding Spring

ASTM A351 CF8M ASTM A276 Type 316 ASTM A276 Type 316 ASTM A276 Type 316 ASTM A276 Type 316 PTFE RPTFE 300 Series Stainless Steel 300 Series Stainless Steel w/ Vinyl Grip RPTFE 300 Series Stainless Steel RPTFE 300 Series Stainless Steel ASTM A313 Stainless Steel ASTM A313 Stainless Steel

PART (1” VALVES) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18

• • • •

MATERIAL

OPTIONS AVAILABLE: (MORE INFORMATION IN SECTION J)

• Minimum quantities apply • To specify an option, replace the “01” standard suffix with the suffix of the option. • To specify multiple options, replace the “01” suffix with the desired suffixes in the numerical order shown below. NOTE: Not all suffixes can be combined together. (SUFFIX)

OPTION

-01 -04-14-15-21-

Standard Configuration 2.25” Stem Extension (Carbon Steel, Zinc Plated) Side Vented Ball (Uni-Directional) Wheel Handle, Steel UHMWPE Seats Graphite packing, spiral wound graphite body seal, RPTFE bearing (API 607, 6th edition, ISO 10497:2010) PTFE Seats and Seals PEEK Seats and Graphite Packing No Lubrication. Assembled Dry. Oxygen Cleaned MPTFE Seats and Graphite Packing (Fire Safe) Drilled and Tapped Purge Port with Plugs 4” Extended Bonnet 316 SS Spiral Wound Gaskets w/PTFE Filler Live Loaded (Lever) Live Loaded (Gear, Actuator) Multi-Seal (Super TFE) Flat Face Flanges Double Packed 4” Extended Bonnet Double Packed 4” Extended Bonnet with Monitoring Port CE Marking. See Page D-3 “Product Approvals” for availability. Garlock EVSP Stem Packing w/Spiral Wound Graphite Gasket (Fire Safe by Design) PCTFE Stem Bearing Positive Material Identification With Test Certificate Tested to API Spec 6D UL & CSA Listed (w/Markings)

-24-

MATERIAL

Body Retainer Ball Stem Packing Gland Stem Seals Seats Gland Screws Gland Plate Stem Nut Lever Stem Bearing Stop Stop Screw Lock Plate Body Seal Lockwasher Grounding Spring

87H - Hastelloy 87M - Monel 87N - Nickel 87S - 304L SS

ASTM A351 CF8M ASTM A276 Type 316 ASTM A276 Type 316 ASTM A276 Type 316 ASTM A276 Type 316 PTFE RPTFE ASTM A193 B8 Class 1 302 or 304 SS 316 SS 302 or 304 with Vinyl Grip RPTFE ASTM A276 Type 316 18-8 SS 302 or 304 SS RPTFE 302 or 304 SS SS

-35-38-49-57-65-69-70-73-76-77-80-82-90-9P-CE-EP-KF-MP-TC-TD-UL-

Pressure/Temperature Ratings - Page M-11, Graph No. 6

1/2” & 3/4” VALVES

1” VALVE

DIMENSIONS PRODUCT NUMBER 87A-903-01

SIZE

A

B

C

D

E

F

G

H

I

J

K

L

M

WT. 6

1/2”

0.50

5.50

3.31

3.31

5.11

0.30

1.09

1.38

1.000

0.500

0.375

0.245

10-24

87A-904-01

3/4”

0.75

6.00

3.56

3.89

5.53

0.36

1.65

1.99

1.392

0.696

0.500

0.287

1/4-20

9

87A-905-01

1”

1.00

6.50

3.82

4.62

6.53

0.47

1.62

2.15

1.392

0.696

0.500

0.287

1/4-20

11

“Apollo” Flow Controls

REV. 04MAY17 industrial.apollovalves.com

Customer Service (704) 841-6000

D-17

87A-900 SERIES STAINLESS STEEL ASME CLASS 300 FLANGED FULL PORT BALL VALVE - 1.5” THRU 2.5” FOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3. STANDARD MATERIAL LIST

VARIATIONS AVAILABLE

PART 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20

• • • •

MATERIAL

Body Retainer Ball Stem Packing Gland Stem Seals Seats Gland Screws Gland Plate Stem Nut Lever Stem Bearing Stop Stop Screw Lock Plate Body Seal Grounding Spring Body Joint Stud Body Joint Nut Lockwasher

ASTM A351 CF8M ASTM A351 CF8M ASTM A276 Type 316 or A351 CF8M ASTM A276 Type 316 ASTM A276 Type 316 PTFE RPTFE ASTM A193 B8 Class 1 316 SS 18-8 SS 316 SS RPTFE ASTM A276 Type 316 316 SS 302 or 304 SS RPTFE SS ASTM A193 Grade B8M ASTM A194 Grade 8 302 or 304 SS

87H - Hastelloy 87M - Monel 87N - Nickel 87S - 304L SS

OPTIONS AVAILABLE: (MORE INFORMATION IN SECTION J)

• Minimum quantities apply • To specify an option, replace the “01” standard suffix with the suffix of the option. • To specify multiple options, replace the “01” suffix with the desired suffixes in the numerical order shown below. NOTE: Not all suffixes can be combined together. (SUFFIX)

OPTION

-01 -04-14-21-

Standard Configuration 2.25” Stem Extension (Carbon Steel, Zinc Plated) Side Vented Ball (Uni-Directional) UHMWPE Seats Graphite packing, spiral wound graphite body seal, RPTFE bearing (API 607, 6th edition, ISO 10497:2010) PTFE Seats and Seals PEEK Seats and Graphite Packing (3” Only) No Lubrication. Assembled Dry. Oxygen Cleaned MPTFE Seats and Graphite Packing (Fire Safe) Drilled and Tapped Purge Ports with Plugs 4” Extended Bonnet 316 SS Spiral Wound Gaskets w/PTFE Filler Live Loaded (Lever) Live Loaded (Gear, Actuator) Multi-Seal (Super TFE) Flat Face Flanges Double Packed 4” Extended Bonnet Double Packed 4” Extended Bonnet with Monitoring Port CE Marking. See Page D-3 “Product Approvals” for availability. Garlock EVSP Stem Packing w/Spiral Wound Graphite Gasket (Fire Safe by Design) PCTFE Stem Bearing Gear Operator with Standard Handwheel Gear Operator with Standard Handwheel & Locking Device Gear Operator with Oversize Handwheel Gear Operator with Oversize Handwheel & Locking Device Positive Material Identification With Test Certificate Tested to API Spec 6D UL & CSA Listed (w/Markings)

-24-35-38-49-57-65-69-70-73-76-77-80-82-90-9P-CE-EP-KF-MG-MH-MJ-MK-MP-TC-TD-UL-

ACTUATOR MOUNTING

Pressure/Temperature Ratings - Page M-11, Graph No. 6

DIMENSIONS PRODUCT NUMBER 87A-907-01

SIZE

A

B

C

D

E

F

G

H

I

J

K

L

M

1.5”

1.50

7.50

3.50

4.62

6.65

0.72

2.41

3.09

1.949

0.974

0.625

0.412

5/16-18

21

87A-908-01

2”

2.00

8.50

4.00

5.61

8.41

0.80

3.31

4.08

1.949

0.974

0.750

0.477

5/16-18

37

87A-909-01

2.5”

2.50

9.50

4.44

6.24

8.41

0.80

3.94

4.71

1.949

0.974

0.750

0.477

5/16-18

57

REV. 04MAY17 D-18

Customer Service (704) 841-6000

www.apolloflowcontrols.com

WT.

“Apollo” Flow Controls

87A-900 SERIES STAINLESS STEEL ASME CLASS 300 FLANGED FULL PORT BALL VALVE - 3” THRU 6” FOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3. STANDARD MATERIAL LIST

VARIATIONS AVAILABLE

PART 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20

• 87H - Hastelloy • 87N - Nickel • 87S - 304L SS

MATERIAL

Body Retainer Ball Stem Packing Gland Stem Seals Seats Gland Screws Gland Plate Adapter Screw Handle Adapter Stem Bearing Stop Stop Screw Lock Plate Body Seal Grounding Spring Body Joint Stud Body Joint Nut Pipe Handle

ASTM A351 CF8M ASTM A351 CF8M ASTM A276 Type 316 or A351 CF8M ASTM A276 Type 316 ASTM A276 Type 316 PTFE RPTFE ASTM A193 B8 Class 1 316 SS 18-8 SS 316 SS RPTFE ASTM A276 Type 316 316 SS 302 or 304 SS RPTFE SS ASTM A193 Grade B8M ASTM A194 Grade 8 Galvanized Steel (not shown)

OPTIONS AVAILABLE: (MORE INFORMATION IN SECTION J)

• Minimum quantities apply • To specify an option, replace the “01” standard suffix with the suffix of the option. • To specify multiple options, replace the “01” suffix with the desired suffixes in the numerical order shown below. NOTE: Not all suffixes can be combined together. (SUFFIX)

OPTION

-01 -14-21-

Standard Configuration Side Vented Ball (Uni-Directional) UHMWPE Seats Graphite packing, spiral wound graphite body seal, RPTFE bearing (API 607, 6th edition, ISO 10497:2010) PTFE Seats and Seals PEEK Seats and Graphite Packing (3” Only) No Lubrication. Assembled Dry. Oxygen Cleaned MPTFE Seats and Graphite Packing (Fire Safe) Drilled and Tapped Purge Port with Plugs 4” Extended Bonnet 316 SS Spiral Wound Gaskets w/PTFE Filler Live Loaded (Lever) Live Loaded (Gear, Actuator) Multi-Seal (Super TFE) Flat Face Flanges Double Packed 4” Extended Bonnet Double Packed 4” Extended Bonnet with Monitoring Port CE Marking. See Page D-3 “Product Approvals” for availability. Garlock EVSP Stem Packing w/Spiral Wound Graphite Gasket (Fire Safe by Design) PCTFE Stem Bearing Gear Operator with Standard Handwheel Gear Operator with Standard Handwheel & Locking Device Gear Operator with Oversize Handwheel Gear Operator with Oversize Handwheel & Locking Device Positive Material Identification With Test Certificate Tested to API Spec 6D UL & CSA Listed (w/Markings)

-24-35-38-49-57-65-69-70-73-76-77-80-82-90-9P-CE-EP-KF-MG-MH-MJ-MK-MP-TC-TD-UL-

Pressure/Temperature Ratings - Page M-11, Graph No. 6

ACTUATOR MOUNTING

DIMENSIONS PRODUCT NUMBER 87A-900-01

SIZE

A

B

C

D

E

F

G

H

I

J

K

L

M

3”

3.00

11.12

5.24

8.80

4.06

0.50

4.75

5.95

2.840

1.420

1.250

0.725

3/8-16

78

87A-90A-01

4”

4.00

12.00

5.44

9.99

5.25

0.50

5.94

7.13

2.840

1.420

1.250

0.725

3/8-16

133

87A-90C-01

6”

6.00

15.88

6.82

13.73

7.30

1.00

7.75

9.48

4.596

2.298

2.000

1.375

3/4-10

329

“Apollo” Flow Controls

WT.

REV. 04MAY17 industrial.apollovalves.com

Customer Service (704) 841-6000

D-19

87A-900 SERIES STAINLESS STEEL ASME CLASS 300 FLANGED FULL PORT BALL VALVE - 8” THRU 12” FOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3. STANDARD MATERIAL LIST

VARIATIONS AVAILABLE

PART 1 2 3 4 5 6 7 8 9 10 11 12 13

• 87H - Hastelloy • 87N - Nickel • 87S - 304L SS

MATERIAL

Body Retainer Ball Stem Packing Gland Stem Seals Seats Gland Screws Gland Plate Stem Bearing Body Seal Body Joint Stud Body Joint Nut

ASTM A351 CF8M ASTM A351 CF8M ASTM A276 Type 316 or A351 CF8M ASTM A276 Type 316 ASTM A276 Type 316 PTFE RPTFE ASTM A193 B8 Class 1 316 SS RPTFE RPTFE ASTM A193 Grade B8M ASTM A194 Grade 8

OPTIONS AVAILABLE: (MORE INFORMATION IN SECTION J)

• Minimum quantities apply • To specify an option, replace the “01” standard suffix with the suffix of the option. • To specify multiple options, replace the “01” suffix with the desired suffixes in the numerical order shown below. NOTE: Not all suffixes can be combined together. (SUFFIX)

OPTION

-01 -14-21-

Standard Configuration Side Vented Ball (Uni-Directional) UHMWPE Seats Graphite packing, spiral wound graphite body seal, RPTFE bearing (API 607, 6th edition, ISO 10497:2010) PTFE Seats and Seals No Lubrication. Assembled Dry. Oxygen Cleaned MPTFE Seats and Graphite Packing (Fire Safe) Drilled and Tapped Purge Ports with Plugs 4” Extended Bonnet (8” Only) Live Loaded (Gear, Actuator) Multi-Seal (Super TFE) Flat Face Flanges Double Packed 4” Extended Bonnet Double Packed 4” Extended Bonnet with Monitoring Port CE Marking. See Page D-3 “Product Approvals” for availability. Garlock EVSP Stem Packing w/Spiral Wound Graphite Gasket (Fire Safe by Design) PCTFE Stem Bearing Gear Operator with Standard Handwheel Gear Operator with Standard Handwheel & Locking Device Gear Operator with Oversize Handwheel Gear Operator with Oversize Handwheel & Locking Device Positive Material Identification With Test Certificate Tested to API Spec 6D UL & CSA Listed (w/Markings)

-24-35-49-57-65-69-70-77-80-82-90-9P-CE-EP-KF-MG-MH-MJ-MK-MP-TC-TD-UL-

ACTUATOR MOUNTING

Pressure/Temperature Ratings - Page M-11, Graph No. 6

10” & 12”

8”

DIMENSIONS PRODUCT NUMBER 87A-90E-01

SIZE

A

B

C

D

E

F

G

8”

8.00

19.75

9.38

12.83

9.56

1.00

10.22

87A-90G-01

10”

10.00

22.38

10.95

18.57

11.33

2.31

12.80

87A-90H-01

12”

12.00

25.50

12.84

20.31

13.40

2.31

14.92

REV. 04MAY17 D-20

Customer Service (704) 841-6000

www.apolloflowcontrols.com

“Apollo” Flow Controls

87B-100 SERIES STAINLESS STEEL ASME CLASS 150 FLANGED STD. PORT BALL VALVE - 3” FOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3. STANDARD MATERIAL LIST

VARIATIONS AVAILABLE

PART 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18

MATERIAL

Body Retainer Ball Stem Packing Gland Stem Seals Seats Gland Screws Gland Plate Stem Nut Lever Stem Bearing Stop Stop Screw Lock Plate Body Seal Grounding Spring Lockwasher

ASTM A351 CF8M ASTM A276 Type 316 ASTM A276 Type 316 or A351 CF8M ASTM A276 Type 316 ASTM A276 Type 316 PTFE RPTFE ASTM A193 B8 Class 1 316 SS 18-8 SS 316 SS with Vinyl Grip RPTFE ASTM A276 Type 316 316 SS 302 or 304 SS RPTFE SS 302 or 304 SS

• 87H - Hastelloy • 87N - Nickel • 87S - 304L SS

OPTIONS AVAILABLE: (MORE INFORMATION IN SECTION J)

• Minimum quantities apply • To specify an option, replace the “01” standard suffix with the suffix of the option. • To specify multiple options, replace the “01” suffix with the desired suffixes in the numerical order shown below. NOTE: Not all suffixes can be combined together. (SUFFIX)

OPTION

-01 -04-14-21-

Standard Configuration 2.25” Stem Extension (Carbon Steel, Zinc Plated) Side Vented Ball (Uni-Directional) UHMWPE Seats Graphite packing, spiral wound graphite body seal, RPTFE bearing (API 607, 6th edition, ISO 10497:2010) PTFE Seats and Seals PEEK Seats and Graphite Packing (3” Only) No Lubrication. Assembled Dry. Oxygen Cleaned MPTFE Seats and Graphite Packing (Fire Safe) Drilled and Tapped Purge Ports with Plugs 4” Extended Bonnet Live Loaded (Lever) Live Loaded (Gear, Actuator) Multi-Seal (Super TFE) Flat Face Flanges Double Packed 4” Extended Bonnet Double Packed 4” Extended Bonnet with Monitoring Port CE Marking. See Page D-3 “Product Approvals” for availability. Garlock EVSP Stem Packing w/Spiral Wound Graphite Gasket (Fire Safe by Design) PCTFE Stem Bearing Gear Operator with Standard Handwheel Gear Operator with Standard Handwheel & Locking Device Gear Operator with Oversize Handwheel Gear Operator with Oversize Handwheel & Locking Device Positive Material Identification With Test Certificate Tested to API Spec 6D UL & CSA Listed (w/Markings)

-24-35-38-49-57-65-69-70-76-77-80-82-90-9P-CE-EP-KF-MG-MH-MJ-MK-MP-TC-TD-UL-

Pressure/Temperature Ratings - Page M-9, Graph No. 2

ACTUATOR MOUNTING

DIMENSIONS PRODUCT NUMBER 87B-100-01

SIZE

A

B

C

D

E

F

G

H

I

J

K

L

M

N

WT.

3”

2.50

8.00

4.00

6.23

8.40

3.93

4.70

1.949

0.974

0.750

0.477

5/16-18

3.00

0.77

43

“Apollo” Flow Controls

REV. 04MAY17 industrial.apollovalves.com

Customer Service (704) 841-6000

D-21

87B-100 SERIES STAINLESS STEEL ASME CLASS 150 FLANGED STD. PORT BALL VALVE - 4” THRU 10” SHORT PATTERN FOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3. STANDARD MATERIAL LIST

VARIATIONS AVAILABLE

PART 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19

• 87H - Hastelloy • 87N - Nickel • 87S - 304L SS

MATERIAL

Body Retainer Ball Stem Packing Gland Stem Seals Seats Gland Screws Gland Plate Adapter Screw Handle Adapter Stem Bearing Stop Stop Screw Lock Plate Body Seal Lockwasher Grounding Spring Adapter Screw

ASTM A351 CF8M ASTM A276 Type 316 ASTM A276 Type 316 or A351 CF8M ASTM A276 Type 316 ASTM A276 Type 316 PTFE RPTFE ASTM A193 B8 Class 1 316 SS 18-8 SS 316 SS RPTFE ASTM A276 Type 316 316 SS 302 or 304 SS RPTFE 302 or 304 SS SS 18-8 SS

OPTIONS AVAILABLE: (MORE INFORMATION IN SECTION J)

• Minimum quantities apply • To specify an option, replace the “01” standard suffix with the suffix of the option. • To specify multiple options, replace the “01” suffix with the desired suffixes in the numerical order shown below. NOTE: Not all suffixes can be combined together. (SUFFIX)

OPTION

-01 -04-14-21-

Standard Configuration 2.25” Stem Extension (Carbon Steel, Zinc Plated) Side Vented Ball (Uni-Directional) UHMWPE Seats Graphite packing, spiral wound graphite body seal, RPTFE bearing (API 607, 6th edition, ISO 10497:2010) PTFE Seats and Seals PEEK Seats and Graphite Packing (3” Only) No Lubrication. Assembled Dry. Oxygen Cleaned MPTFE Seats and Graphite Packing (Fire Safe) Drilled and Tapped Purge Ports with Plugs 4” Extended Bonnet Live Loaded (Lever) Live Loaded (Gear, Actuator) Multi-Seal (Super TFE) Flat Face Flanges Double Packed 4” Extended Bonnet Double Packed 4” Extended Bonnet with Monitoring Port CE Marking. See Page D-3 “Product Approvals” for availability. Garlock EVSP Stem Packing w/Spiral Wound Graphite Gasket (Fire Safe by Design) PCTFE Stem Bearing Gear Operator with Standard Handwheel Gear Operator with Standard Handwheel & Locking Device Gear Operator with Oversize Handwheel Gear Operator with Oversize Handwheel & Locking Device Positive Material Identification With Test Certificate Tested to API Spec 6D UL & CSA Listed (w/Markings)

-24-35-38-49-57-65-69-70-76-77-80-82-90-9P-CE-EP-KF-MG-MH-MJ-MK-MP-TC-TD-UL-

Pressure/Temperature Ratings - Page M-9, Graph No. 2

ACTUATOR MOUNTING

DIMENSIONS PRODUCT NUMBER 87B-10A-01

SIZE

A

B

C

D

E

F

G

H

I

J

K

L

M

4”

3.00

9.00

4.18

8.80

0.50

4.75

5.95

2.840

1.420

1.250

0.725

3/8-16

4.00

72

6”

4.00

10.50

5.25

9.99

0.50

5.94

7.13

2.840

1.420

1.250

0.725

3/8-16

6.00

110

87B-10E-01

8”

6.00

11.50

5.75

13.61

1.00

7.63

9.36

4.596

2.298

2.000

1.375

3/4-10

8.00

210

87B-10G-01

10”

8.00

13.00

6.50

N/A

1.00

9.50

11.23

4.596

2.298

2.000

1.375

3/4-10

10.0

350

87B-10C-01

REV. 04MAY17 D-22

Customer Service (704) 841-6000

www.apolloflowcontrols.com

WT.

“Apollo” Flow Controls

87J-100 SERIES DUPLEX STAINLESS STEEL ASME CLASS 150 FLANGED STD. PORT BALL VALVE - 1.5” THRU 2” FOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3. STANDARD MATERIAL LIST

VARIATIONS AVAILABLE

PART

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18

MATERIAL

Body Retainer Ball Stem Packing Gland Stem Seals Seats Gland Screws Gland Plate Stem Nut Lever Stem Bearing Stop Stop Screw Lock Plate Body Seal Lockwasher Grounding Spring

ASTM A995 4A ASTM A276/A479 Alloy 2205 ASTM A276/A479 Alloy 2205 or A995 4A ASTM A276/A479 Alloy 2205 ASTM A276 Type 316 PTFE RPTFE ASTM A193 B8 Class 1 302 or 304 SS ASTM A194 Grade 8 302 or 304 SS with Vinyl Grip RPTFE ASTM A276 Type 316 18-8 SS 302 or 304 SS RPTFE 302 or 304 SS SS, ASTM A313

• • • •

87H - Hastelloy 87M - Monel (1.5” to 2” only) 87N - Nickel 87S - 304L SS

OPTIONS AVAILABLE: (MORE INFORMATION IN SECTION J)

• Minimum quantities apply • To specify an option, replace the “01” standard suffix with the suffix of the option. • To specify multiple options, replace the “01” suffix with the desired suffixes in the numerical order shown below. NOTE: Not all suffixes can be combined together. (SUFFIX)

OPTION

-01 -04-14-21-

Standard Configuration 2.25” Stem Extension (Carbon Steel, Zinc Plated) Side Vented Ball (Uni-Directional) UHMWPE Seats Graphite packing, spiral wound graphite body seal, RPTFE bearing (fire safe “by design”) PTFE Seats and Seals PEEK Seats and Graphite Packing (3” Only) No Lubrication. Assembled Dry. Oxygen Cleaned MPTFE Seats and Graphite Packing (Fire Safe) Drilled and Tapped Purge Ports with Plugs 4” Extended Bonnet Live Loaded (Lever) Live Loaded (Gear, Actuator) Multi-Seal (Super TFE) Flat Face Flanges Double Packed 4” Extended Bonnet Double Packed 4” Extended Bonnet with Monitoring Port CE Marking. See Page D-3 “Product Approvals” for availability. Garlock EVSP Stem Packing w/Spiral Wound Graphite Gasket (Fire Safe by Design) PCTFE Stem Bearing Gear Operator with Standard Handwheel Gear Operator with Standard Handwheel & Locking Device Gear Operator with Oversize Handwheel Gear Operator with Oversize Handwheel & Locking Device Positive Material Identification With Test Certificate Tested to API Spec 6D UL & CSA Listed (w/Markings)

-24-35-38-49-57-65-69-70-76-77-80-82-90-9P-CE-EP-KF-MG-MH-MJ-MK-MP-TC-TD-UL-

ACTUATOR MOUNTING

Pressure/Temperature Ratings - Page M-28, Graph No. 40

DIMENSIONS PRODUCT NUMBER 87J-107-01 87J-108-01

SIZE

A

B

C

D

1.5”

1.25

6.50

3.50

2”

1.50

7.00

3.69

“Apollo” Flow Controls

E

F

G

4.85

6.53

0.47

1.85

4.62

6.65

0.72

2.41

H

I

J

K

L

M

N

WT.

2.38

1.392

0.696

0.500

0.287

1/4-20

1.50

9

3.09

1.949

0.974

0.625

0.412

5/16-18

2.00

18

REV. 04MAY17 industrial.apollovalves.com

Customer Service (704) 841-6000

D-23

87J-100 SERIES DUPLEX STAINLESS STEEL ASME CLASS 150 FLANGED STD. PORT BALL VALVE - 2.5” THRU 3” FOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3. STANDARD MATERIAL LIST

VARIATIONS AVAILABLE

PART 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20

MATERIAL

Body Retainer Ball Stem Packing Gland Stem Seals Seats Gland Screws Gland Plate Stem Nut Lever Stem Bearing Stop Stop Screw Lock Plate Body Seal Grounding Spring Body Joint Stud Body Joint Nut Lockwasher

ASTM A995 4A ASTM A995 4A ASTM A276/A479 Alloy 2205 or A995 4A ASTM A276/A479 Alloy 2205 ASTM A276 Type 316 PTFE RPTFE ASTM A193 B8 Class 1 316 SS ASTM A194 Grade 8 SS 316 SS RPTFE ASTM A276 Type 316 316 SS 302 or 304 SS RPTFE SS, ASTM A313 ASTM A193 Grade B8M ASTM A194 Grade 8 302 or 304 SS

• 87H - Hastelloy • 87N - Nickel • 87S - 304L SS

OPTIONS AVAILABLE: (MORE INFORMATION IN SECTION J)

• Minimum quantities apply • To specify an option, replace the “01” standard suffix with the suffix of the option. • To specify multiple options, replace the “01” suffix with the desired suffixes in the numerical order shown below. NOTE: Not all suffixes can be combined together. (SUFFIX)

OPTION

-01 -04-14-21-

Standard Configuration 2.25” Stem Extension (Carbon Steel, Zinc Plated) Side Vented Ball (Uni-Directional) UHMWPE Seats Graphite packing, spiral wound graphite body seal, RPTFE bearing (fire safe “by design”) PTFE Seats and Seals PEEK Seats and Graphite Packing No Lubrication. Assembled Dry. Oxygen Cleaned MPTFE Seats and Graphite Packing (Fire Safe) Cleaned For Industrial Gases Drilled and Tapped Purge Port with Plugs 4” Extended Bonnet 316 SS Spiral Wound Gaskets w/PTFE Filler Live Loaded 87A/88A Series (Lever) Live Loaded (Gear, Actuator) Multi-Seal (Super TFE) 87A/88A Series Flat Face Flanges Double Packed 4” Extended Bonnet Double Packed 4” Extended Bonnet with Monitoring Port CE Marking. See Page D-3 “Product Approvals” for availability. Garlock EVSP Stem Packing w/Spiral Wound Graphite Gasket (Fire Safe by Design) PCTFE Stem Bearing Gear Operator with Standard Handwheel Gear Operator with Standard Handwheel & Locking Device Gear Operator with Oversize Handwheel Gear Operator with Oversize Handwheel & Locking Device Positive Material Identification With Test Certificate Tested to API Spec 6D

-24-35-38-49-57-65-67-69-70-73-76-77-80-82-90-9P-CE-EP-KF-MG-MH-MJ-MK-MP-TC-TD-

Pressure/Temperature Ratings - Page M-28, Graph No. 40

ACTUATOR MOUNTING

DIMENSIONS PRODUCT NUMBER 87J-109-01 87J-100-01

SIZE

A

B

C

2.5” 3”

D

E

F

2.00

7.50

2.50

8.00

G

H

I

J

K

L

M

3.50

5.61

8.41

3.51

6.24

8.41

0.80

3.31

4.08

1.949

0.974

0.750

0.477

5/16-18

2.50

27

0.80

3.94

4.71

1.949

0.974

0.750

0.477

5/16-18

3.00

34

REV. 04MAY17 D-24

Customer Service (704) 841-6000

www.apolloflowcontrols.com

N

WT.

“Apollo” Flow Controls

87J-100 SERIES DUPLEX STAINLESS STEEL ASME CLASS 150 FLANGED STD. PORT BALL VALVE - 4” THRU 8” FOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3. STANDARD MATERIAL LIST

VARIATIONS AVAILABLE

PART 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21

MATERIAL

Body Retainer Ball Stem Packing Gland Stem Seals Seats Gland Screws Gland Plate Adapter Screw Handle Adapter Stem Bearing Stop Stop Screw Lock Plate Body Seal Grounding Spring Body Joint Stud Body Joint Nut Lockwasher Pipe Handle

ASTM A995 4A ASTM A995 4A ASTM A276/A479 Alloy 2205 or A995 4A ASTM A276/A479 Alloy 2205 ASTM A276 Type 316 PTFE RPTFE ASTM A193 B8 Class 1 316 SS 18-8 SS 316 SS RPTFE ASTM A276 Type 316 316 SS 302 or 304 SS RPTFE SS, ASTM 313 ASTM A193 Grade B8M ASTM A194 Grade 8 302 or 304 SS Galvanized Steel (not Shown)

• 87H - Hastelloy • 87N - Nickel • 87S - 304L SS

OPTIONS AVAILABLE: (MORE INFORMATION IN SECTION J)

• Minimum quantities apply • To specify an option, replace the “01” standard suffix with the suffix of the option. • To specify multiple options, replace the “01” suffix with the desired suffixes in the numerical order shown below. NOTE: Not all suffixes can be combined together. (SUFFIX)

OPTION

-01 -14-21-

Standard Configuration Side Vented Ball (Uni-Directional) UHMWPE Seats Graphite packing, spiral wound graphite body seal, RPTFE bearing (fire safe “by design”) PTFE Seats and Seals No Lubrication. Assembled Dry. Oxygen Cleaned MPTFE Seats and Graphite Packing (Fire Safe) Cleaned For Industrial Gases Drilled and Tapped Purge Ports with Plugs Extended Bonnet 316 SS Spiral Wound Gaskets w/PTFE Filler Live Loaded (Lever) Live Loaded (Gear, Actuator) Multi-Seal (Super TFE) 87A/88A Series Flat Face Flanges Double Packed 4” Extended Bonnet Double Packed 4” Extended Bonnet with Monitoring Port CE Marking. See Page D-3 “Product Approvals” for availability. Garlock EVSP Stem Packing w/Spiral Wound Graphite Gasket (Fire Safe by Design) PCTFE Stem Bearing Gear Operator with Standard Handwheel Gear Operator with Standard Handwheel & Locking Device Gear Operator with Oversize Handwheel Gear Operator with Oversize Handwheel & Locking Device Positive Material Identification With Test Certificate Tested to API Spec 6D

-24-35-49-57-65-67-69-70-73-76-77-80-82-90-9P-CE-EP-KF-MG-MH-MJ-MK-MP-TC-TD-

Pressure/Temperature Ratings - Page M-28, Graph No. 40

ACTUATOR MOUNTING

DIMENSIONS PRODUCT NUMBER 87J-10A-01

SIZE

A

B

C

D

E

F

G

H

I

J

K

L

M

N

WT.

4”

3.00

9.00

4.18

8.80

3.88

0.50

4.75

5.95

2.840

1.420

1.250

0.725

3/8-16

4.00

73

87J-10C-01

6”

4.00

10.50

4.69

9.99

5.13

0.50

5.94

7.13

2.840

1.420

1.250

0.725

3/8-16

6.00

117

87J-10E-01

8”

6.00

18.00

9.00

13.73

7.00

1.00

7.75

9.48

4.596

2.298

2.000

1.375

3/4-10

8.00

310

“Apollo” Flow Controls

REV. 04MAY17 industrial.apollovalves.com

Customer Service (704) 841-6000

D-25

87J-100 SERIES DUPLEX STAINLESS STEEL ASME CLASS 150 FLANGED STD. PORT BALL VALVE - 10” FOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3. STANDARD MATERIAL LIST

VARIATIONS AVAILABLE

PART 1 2 3 4 5 6 7 8 9 10 11 12 13

MATERIAL

Body Retainer Ball Stem Packing Gland Stem Seals Seats Gland Screws Gland Plate Stem Bearing Body Seal Body Joint Stud Body Joint Nut

ASTM A995 4A ASTM A995 4A ASTM A276/A479 Alloy 2205 or A995 4A ASTM A276/A479 Alloy 2205 ASTM A276 Type 316 PTFE RPTFE ASTM A193 B8 Class 1 316 SS RPTFE RPTFE ASTM A193 Grade B8M ASTM A194 Grade 8

• 87H - Hastelloy • 87N - Nickel • 87S - 304L SS

OPTIONS AVAILABLE: (MORE INFORMATION IN SECTION J)

• Minimum quantities apply • To specify an option, replace the “01” standard suffix with the suffix of the option. • To specify multiple options, replace the “01” suffix with the desired suffixes in the numerical order shown below. NOTE: Not all suffixes can be combined together. (SUFFIX)

OPTION

-01 -14-21-

Standard Configuration Side Vented Ball (Uni-Directional) UHMWPE Seats Graphite packing, spiral wound graphite body seal, RPTFE bearing (fire safe “by design”) PTFE Seats and Seals No Lubrication. Assembled Dry. Oxygen Cleaned MPTFE Seats and Graphite Packing (Fire Safe) Drilled and Tapped Purge Port with Plugs 4” Extended Bonnet Live Loaded 87A/88A Series (Gear, Actuator) Multi-Seal (Super TFE) Flat Face Flanges Double Packed 4” Extended Bonnet Double Packed 4” Extended Bonnet with Monitoring Port CE Marking. See Page D-3 “Product Approvals” for availability. Garlock EVSP Stem Packing w/Spiral Wound Graphite Gasket (Fire Safe by Design) PCTFE Stem Bearing Gear Operator with Standard Handwheel Gear Operator with Standard Handwheel & Locking Device Gear Operator with Oversize Handwheel Gear Operator with Oversize Handwheel & Locking Device Positive Material Identification With Test Certificate Tested to API Spec 6D

-24-35-49-57-65-69-70-77-80-82-90-9P-CE-EP-KF-MG-MH-MJ-MK-MP-TC-TD-

Pressure/Temperature RatingsPage M-28, Graph No. 40

ACTUATOR MOUNTING

DIMENSIONS PRODUCT NUMBER 87J-10G-01

SIZE

A

B

C

D

E

F

G

H

I

J

K

L

M

WT.

10”

8.00

21.00

10.37

12.83

9.18

1.00

10.22

4.596

2.298

2.000

1.375

3/4-10

10.00

526

REV. 04MAY17 D-26

Customer Service (704) 841-6000

www.apolloflowcontrols.com

“Apollo” Flow Controls

87J-200 SERIES DUPLEX STAINLESS STEEL ASME CLASS 150 FLANGED FULL PORT BALL VALVE - 1/2” THRU 1” FOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3. STANDARD MATERIAL LIST

VARIATIONS AVAILABLE

PART (1/2” & 3/4” VALVES) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18

Body Retainer Ball Stem Packing Gland Stem Seals Seats Stem Nut Lever Stem Bearing Stop Body Seal Lockwasher Grounding Spring Grounding Spring Part (1” Valves) Body Retainer Ball Stem Packing Gland Stem Seals Seats Gland Screws Gland Plate Stem Nut Lever Stem Bearing Stop Stop Screw Lock Plate Body Seal Lockwasher Grounding Spring

• • • •

MATERIAL

ASTM A995 4A ASTM A276/A479 Alloy 2205 ASTM A276/A479 Alloy 2205 ASTM A276/A479 Alloy 2205 ASTM A276 Type 316 PTFE RPTFE 300 Series Stainless Steel 300 Series Stainless Steel w/ Vinyl Grip RPTFE 300 Series Stainless Steel RPTFE 300 Series Stainless Steel ASTM A313 Stainless Steel ASTM A313 Stainless Steel MATERIAL ASTM A995 4A ASTM A276/A479 Alloy 2205 ASTM A276/A479 Alloy 2205 ASTM A276/A479 Alloy 2205 ASTM A276 Type 316 PTFE RPTFE ASTM A193 B8 Class 1 302 or 304 SS 316 SS 302 or 304 with Vinyl Grip RPTFE ASTM A276 Type 316 18-8 SS 302 or 304 SS RPTFE 302 or 304 SS SS

87H - Hastelloy 87M - Monel 87N - Nickel 87S - 304L SS

OPTIONS AVAILABLE: (MORE INFORMATION IN SECTION J)

• Minimum quantities apply • To specify an option, replace the “01” standard suffix with the suffix of the option. • To specify multiple options, replace the “01” suffix with the desired suffixes in the numerical order shown below. NOTE: Not all suffixes can be combined together. (SUFFIX)

OPTION

-01 -04-14-15-21-

Standard Configuration 2.25” Stem Extension (Carbon Steel, Zinc Plated) Side Vented Ball (Uni-Directional) Wheel Handle, Steel UHMWPE Seats Graphite packing, spiral wound graphite body seal, RPTFE bearing (fire safe “by design”) PTFE Seats and Seals PEEK Seats and Graphite Packing No Lubrication. Assembled Dry. Oxygen Cleaned MPTFE Seats and Graphite Packing (Fire Safe) Drilled and Tapped Purge Port with Plugs 4” Extended Bonnet 316 SS Spiral Wound Gaskets w/PTFE Filler Live Loaded (Lever) Live Loaded (Gear, Actuator) Multi-Seal (Super TFE) Flat Face Flanges Double Packed 4” Extended Bonnet Double Packed 4” Extended Bonnet with Monitoring Port CE Marking. See Page D-3 “Product Approvals” for availability. Garlock EVSP Stem Packing w/Spiral Wound Graphite Gasket (Fire Safe by Design) PCTFE Stem Bearing Positive Material Identification With Test Certificate Tested to API Spec 6D

-24-35-38-49-57-65-69-70-73-76-77-80-82-90-9P-CE-EP-KF-MP-TC-TD-

Pressure/Temperature RatingsPage M-28, Graph No. 40

1/2” & 3/4” VALVES

1” VALVE

DIMENSIONS PRODUCT NUMBER 87J-203-01

SIZE

A

B

C

D

E

F

G

H

I

J

K

L

M

1/2”

0.50

4.25

2.06

3.31

5.11

0.30

1.09

1.41

1.00

0.500

0.375

0.245

10-24

5

87J-204-01

3/4”

0.75

4.62

2.18

3.89

5.53

0.36

1.65

1.99

1.392

0.696

0.500

0.287

1/4-20

6

87J-205-01

1”

1.00

5.00

2.32

4.62

6.53

0.47

1.62

2.15

1.392

0.696

0.500

0.287

1/4-20

7

“Apollo” Flow Controls

WT.

REV. 04MAY17 industrial.apollovalves.com

Customer Service (704) 841-6000

D-27

87J-200 SERIES DUPLEX STAINLESS STEEL ASME CLASS 150 FLANGED FULL PORT BALL VALVE - 1.5 THRU 2.5” FOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3. STANDARD MATERIAL LIST

VARIATIONS AVAILABLE

PART 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20

MATERIAL

Body Retainer Ball Stem Packing Gland Stem Seals Seats Gland Screws Gland Plate Adapter Screw Lever Stem Bearing Stop Stop Screw Lock Plate Body Seal Grounding Spring Body Joint Stud Body Joint Nut Lockwasher

ASTM A995 4A ASTM A995 4A ASTM A276/A479 Alloy 2205 or A995 4A ASTM A276/A479 Alloy 2205 ASTM A276 Type 316 PTFE RPTFE ASTM A193 B8 Class 1 316 SS 18-8 SS 316 SS RPTFE ASTM A276 Type 316 316 SS 302 or 304 SS RPTFE SS ASTM A193 Grade B8M ASTM A194 Grade 8 302 or 304 SS

• • • •

87H - Hastelloy 87M - Monel 87N - Nickel 87S - 304L SS

OPTIONS AVAILABLE: (MORE INFORMATION IN SECTION J)

• Minimum quantities apply • To specify an option, replace the “01” standard suffix with the suffix of the option. • To specify multiple options, replace the “01” suffix with the desired suffixes in the numerical order shown below. NOTE: Not all suffixes can be combined together. (SUFFIX)

OPTION

-01 -04-14-21-

Standard Configuration 2.25” Stem Extension (Carbon Steel, Zinc Plated) Side Vented Ball (Uni-Directional) UHMWPE Seats Graphite packing, spiral wound graphite body seal, RPTFE bearing (fire safe “by design”) PTFE Seats and Seals PEEK Seats and Graphite Packing No Lubrication. Assembled Dry. Oxygen Cleaned MPTFE Seats and Graphite Packing (Fire Safe) Drilled and Tapped Purge Ports with Plugs 4” Extended Bonnet 316 SS Spiral Wound Gaskets w/PTFE Filler Live Loaded (Lever) Live Loaded (Gear, Actuator) Multi-Seal (Super TFE) Flat Face Flanges Gear Operator with Standard Handwheel Double Packed 4” Extended Bonnet Double Packed 4” Extended Bonnet with Monitoring Port CE Marking. See Page D-3 “Product Approvals” for availability. Garlock EVSP Stem Packing w/Spiral Wound Graphite Gasket (Fire Safe by Design) PCTFE Stem Bearing Gear Operator with Standard Handwheel & Locking Device Gear Operator with Oversize Handwheel Gear Operator with Oversize Handwheel & Locking Device Positive Material Identification With Test Certificate Tested to API Spec 6D

-24-35-38-49-57-65-69-70-73-76-77-80-82-MG-90-9P-CE-EP-KF-MH-MJ-MK-MP-TC-TD-

Pressure/Temperature Ratings - Page M-28, Graph No. 40

ACTUATOR MOUNTING

DIMENSIONS PRODUCT NUMBER 87J-207-01

SIZE

A

B

C

D

E

F

G

H

I

K

L

M

WT.

1.5”

1.50

6.50

3.00

4.62

6.65

0.72

2.41

3.09

1.949

0.974

0.625

0.412

5/16-18

14

87J-208-01

2”

2.00

7.00

3.04

5.61

8.41

0.80

3.31

4.08

1.949

0.974

0.750

0.477

5/16-18

25

87J-209-01

2.5”

2.50

7.50

3.34

6.24

8.41

0.80

3.94

4.71

1.949

0.974

0.750

0.477

5/16-18

30

REV. 04MAY17 D-28

J

Customer Service (704) 841-6000

www.apolloflowcontrols.com

“Apollo” Flow Controls

87J-200 SERIES DUPLEX STAINLESS STEEL ASME CLASS 150 FLANGED FULL PORT BALL VALVE - 3” THRU 6” FOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3. STANDARD MATERIAL LIST

VARIATIONS AVAILABLE

PART 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20

MATERIAL

Body Retainer Ball Stem Packing Gland Stem Seals Seats Gland Screws Gland Plate Adapter Screw Handle Adapter Stem Bearing Stop Stop Screw Lock Plate Body Seal Grounding Spring Body Joint Stud Body Joint Nut Pipe Handle

ASTM A995 4A ASTM A995 4A ASTM A276/A479 Alloy 2205 or A995 4A ASTM A276/A479 Alloy 2205 ASTM A276 Type 316 PTFE RPTFE ASTM A193 B8 Class 1 316 SS 18-8 SS 316 with Vinyl Grip RPTFE ASTM A276 Type 316 316 SS 302 or 304 SS RPTFE SS ASTM A193 Grade B8M ASTM A194 Grade 8 Galvanized Steel (not shown)

• 87H - Hastelloy • 87N - Nickel • 87S - 304L SS

OPTIONS AVAILABLE: (MORE INFORMATION IN SECTION J)

• Minimum quantities apply • To specify an option, replace the “01” standard suffix with the suffix of the option. • To specify multiple options, replace the “01” suffix with the desired suffixes in the numerical order shown below. NOTE: Not all suffixes can be combined together. (SUFFIX)

OPTION

-01 -14-21-

Standard Configuration Side Vented Ball (Uni-Directional) UHMWPE Seats Graphite packing, spiral wound graphite body seal, RPTFE bearing (fire safe “by design”) PTFE Seats and Seals PEEK Seats and Graphite Packing No Lubrication. Assembled Dry. Oxygen Cleaned MPTFE Seats and Graphite Packing (Fire Safe) Drilled and Tapped Purge Ports with Plugs 4” Extended Bonnet 316 SS Spiral Wound Gaskets w/PTFE Filler Live Loaded (Lever) Live Loaded (Gear, Actuator) Multi-Seal (Super TFE) Flat Face Flanges Double Packed 4” Extended Bonnet Double Packed 4” Extended Bonnet with Monitoring Port CE Marking. See Page D-3 “Product Approvals” for availability. Garlock EVSP Stem Packing w/Spiral Wound Graphite Gasket (Fire Safe by Design) PCTFE Stem Bearing Gear Operator with Standard Handwheel Gear Operator with Standard Handwheel & Locking Device Gear Operator with Oversize Handwheel Gear Operator with Oversize Handwheel & Locking Device Positive Material Identification With Test Certificate Tested to API Spec 6D

-24-35-38-49-57-65-69-70-73-76-77-80-82-90-9P-CE-EP-KF-MG-MH-MJ-MK-MP-TC-TD-

Pressure/Temperature Ratings - Page M-28, Graph No. 40

ACTUATOR MOUNTING

DIMENSIONS PRODUCT NUMBER 87J-200-01

SIZE

A

B

C

D

E

F

G

H

I

J

K

L

M

WT. 60

3”

3.00

8.00

3.68

8.80

3.88

0.50

4.75

5.95

2.840

1.420

1.250

0.725

3/8-16

87J-20A-01

4”

4.00

9.00

3.94

9.99

5.13

0.50

5.94

7.13

2.840

1.420

1.250

0.725

3/8-16

91

87J-20C-01

6”

6.00

15.50

7.19

13.73

7.00

1.00

7.75

9.48

4.596

2.298

2.000

1.375

3/4-10

248

“Apollo” Flow Controls

REV. 04MAY17 industrial.apollovalves.com

Customer Service (704) 841-6000

D-29

87J-200 SERIES DUPLEX STAINLESS STEEL ASME CLASS 150 FLANGED FULL PORT BALL VALVE - 8” THRU 12” FOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3. STANDARD MATERIAL LIST

VARIATIONS AVAILABLE

PART 1 2 3 4 5 6 7 8 9 10 11 12 13

MATERIAL

Body Retainer Ball Stem Packing Gland Stem Seals Seats Gland Screws Gland Plate Stem Bearing Body Seal Body Joint Stud Body Joint Nut

ASTM A995 4A ASTM A995 4A ASTM A276/A479 Alloy 2205 or A995 4A ASTM A276/A479 Alloy 2205 ASTM A276 Type 316 PTFE RPTFE ASTM A193 B8 Class 1 316 SS RPTFE RPTFE ASTM A193 Grade B8M ASTM A194 Grade 8

• 87H - Hastelloy • 87N - Nickel • 87S - 304L SS

OPTIONS AVAILABLE: (MORE INFORMATION IN SECTION J)

• Minimum quantities apply • To specify an option, replace the “01” standard suffix with the suffix of the option. • To specify multiple options, replace the “01” suffix with the desired suffixes in the numerical order shown below. NOTE: Not all suffixes can be combined together. (SUFFIX)

OPTION

-01 -14-21-

Standard Configuration Side Vented Ball (Uni-Directional) UHMWPE Seats Graphite packing, spiral wound graphite body seal, RPTFE bearing (fire safe “by design”) PTFE Seats and Seals No Lubrication. Assembled Dry. Oxygen Cleaned MPTFE Seats and Graphite Packing (Fire Safe) Drilled and Tapped Purge Ports with Plugs 4” Extended Bonnet (8” Only) Live Loaded (Gear, Actuator) Multi-Seal (Super TFE) Flat Face Flanges Double Packed 4” Extended Bonnet Double Packed 4” Extended Bonnet with Monitoring Port CE Marking. See Page D-3 “Product Approvals” for availability. Garlock EVSP Stem Packing w/Spiral Wound Graphite Gasket (Fire Safe by Design) PCTFE Stem Bearing Gear Operator with Standard Handwheel Gear Operator with Standard Handwheel & Locking Device Gear Operator with Oversize Handwheel Gear Operator with Oversize Handwheel & Locking Device Positive Material Identification With Test Certificate Tested to API Spec 6D

-24-35-49-57-65-69-70-77-80-82-90-9P-CE-EP-KF-MG-MH-MJ-MK-MP-TC-TD-

ACTUATOR MOUNTING

Pressure/Temperature Ratings - Page M-28, Graph No. 40

10” & 12”

8”

DIMENSIONS PRODUCT NUMBER 87J-20E-01

SIZE

A

B

C

D

E

F

G

8”

8.00

18.00

8.88

12.83

9.18

1.00

10.22

87J-20G-01

10”

10.00

21.00

10.26

18.57

11.33

2.31

12.80

87J-20H-01

12”

12.00

24.00

12.09

20.31

13.40

2.31

14.92

REV. 04MAY17 D-30

Customer Service (704) 841-6000

www.apolloflowcontrols.com

“Apollo” Flow Controls

87J-700 SERIES DUPLEX STAINLESS STEEL ASME CLASS 300 FLANGED STD. PORT BALL VALVE - 1.5” THRU 2” FOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3. STANDARD MATERIAL LIST

VARIATIONS AVAILABLE

PART 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18

• • • •

MATERIAL

Body Retainer Ball Stem Packing Gland Stem Seals Seats Gland Screws Gland Plate Stem Nut Lever Stem Bearing Stop Stop Screw Lock Plate Body Seal Lockwasher Grounding Spring

ASTM A995 4A ASTM A995 4A ASTM A276/A479 Alloy 2205 ASTM A276/A479 Alloy 2205 ASTM A276 Type 316 PTFE RPTFE ASTM A193 B8 Class 1 302 & 304 SS ASTM A194 Grade 8 302 & 304 SS with Vinyl Grip RPTFE ASTM A276 Type 316 18-8 SS 302 or 304 SS RPTFE 302 or 304 SS SS, ASTM A313

87H - Hastelloy 87M - Monel 87N - Nickel 87S - 304L SS

OPTIONS AVAILABLE: (MORE INFORMATION IN SECTION J)

• Minimum quantities apply • To specify an option, replace the “01” standard suffix with the suffix of the option. • To specify multiple options, replace the “01” suffix with the desired suffixes in the numerical order shown below. NOTE: Not all suffixes can be combined together. (SUFFIX)

OPTION

-01 -04-14-15-21-

Standard Configuration 2.25” Stem Extension (Carbon Steel, Zinc Plated) Side Vented Ball (See Page J-2) Wheel Handle, Steel UHMWPE Seats Graphite packing, spiral wound graphite body seal, RPTFE bearing (fire safe “by design”) PTFE Seats and Seals PEEK Seats and Graphite Packing No Lubrication. Assembled Dry. Oxygen Cleaned MPTFE Seats and Graphite Packing (Fire Safe) Drilled and Tapped Purge Ports with Plugs 4” Extended Bonnet 316 SS Spiral Wound Gaskets w/PTFE Filler Live Loaded (Lever) Live Loaded (Gear, Actuator) Multi-Seal (Super TFE) Flat Face Flanges Double Packed 4” Extended Bonnet Double Packed 4” Extended Bonnet with Monitoring Port CE Marking. See Page D-3 “Product Approvals” for availability. Garlock EVSP Stem Packing w/Spiral Wound Graphite Gasket (Fire Safe by Design) PCTFE Stem Bearing Positive Material Identification With Test Certificate Tested to API Spec 6D

-24-35-38-49-57-65-69-70-73-76-77-80-82-90-9P-CE-EP-KF-MP-TC-TD-

Pressure/Temperature Ratings - Page M-28, Graph No. 41

ACTUATOR MOUNTING

DIMENSIONS PRODUCT NUMBER 87J-707-01A 87J-708-01

SIZE

A

B

C

D

E

F

G

H

I

J

K

L

M

N

WT.

1.5”

1.25

7.50

4.50

4.85

6.53

0.47

1.85

2.38

1.392

0.696

0.500

0.287

1/4-20

1.50

15.7

2”

1.50

8.50

5.19

4.62

6.65

0.72

2.41

3.09

1.949

0.974

0.625

0.412

5/16-18

2.00

24.0

“Apollo” Flow Controls

REV. 04MAY17 industrial.apollovalves.com

Customer Service (704) 841-6000

D-31

87J-700 SERIES DUPLEX STAINLESS STEEL ASME CLASS 300 FLANGED STD. PORT BALL VALVE - 2.5” THRU 3” FOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3. STANDARD MATERIAL LIST

VARIATIONS AVAILABLE

PART 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20

MATERIAL

Body Retainer Ball Stem Packing Gland Stem Seals Seats Gland Screws Gland Plate Stem Nut Lever Stem Bearing Stop Stop Screw Lock Plate Body Seal Grounding Spring Body Joint Stud Body Joint Nut Lockwasher

ASTM A995 4A ASTM A995 4A ASTM A276/A479 Alloy 2205 or A995 4A ASTM A276/A479 Alloy 2205 ASTM A276 Type 316 PTFE RPTFE ASTM A193 B8 Class 1 316 SS ASTM A194 Grade 8 SS 316 SS RPTFE ASTM A276 Type 316 316 SS 302 or 304 SS RPTFE SS, ASTM A313 ASTM A193 Grade B8M ASTM A194 Grade 8 302 or 304 SS

• 87H - Hastelloy • 87N - Nickel • 87S - 304L SS

OPTIONS AVAILABLE: (MORE INFORMATION IN SECTION J)

• Minimum quantities apply • To specify an option, replace the “01” standard suffix with the suffix of the option. • To specify multiple options, replace the “01” suffix with the desired suffixes in the numerical order shown below. NOTE: Not all suffixes can be combined together. (SUFFIX)

OPTION

-01 -04-14-21-

Standard Configuration 2.25” Stem Extension (Carbon Steel, Zinc Plated) Side Vented Ball (Uni-Directional) UHMWPE Seats Graphite packing, spiral wound graphite body seal, RPTFE bearing (fire safe “by design”) PTFE Seats and Seals PEEK Seats and Graphite Packing No Lubrication. Assembled Dry. Oxygen Cleaned MPTFE Seats and Graphite Packing (Fire Safe) Drilled and Tapped Purge Ports with Plugs 4” Extended Bonnet 316 SS Spiral Wound Gaskets w/PTFE Filler Live Loaded (Lever) Live Loaded (Gear, Actuator) Multi-Seal (Super TFE) Flat Face Flanges Double Packed 4” Extended Bonnet Double Packed 4” Extended Bonnet with Monitoring Port CE Marking. See Page D-3 “Product Approvals” for availability. Garlock EVSP Stem Packing w/Spiral Wound Graphite Gasket (Fire Safe by Design) PCTFE Stem Bearing Gear Operator with Standard Handwheel Gear Operator with Standard Handwheel & Locking Device Gear Operator with Oversize Handwheel Gear Operator with Oversize Handwheel & Locking Device Positive Material Identification With Test Certificate Tested to API Spec 6D

-24-35-38-49-57-65-69-70-73-76-77-80-82-90-9P-CE-EP-KF-MG-MH-MJ-MK-MP-TC-TD-

Pressure/Temperature Ratings - Page M-28, Graph No. 41

ACTUATOR MOUNTING

DIMENSIONS PRODUCT NUMBER 87J-709-01 87J-700-01

SIZE

A

B

2.5”

2.00

9.50

3”

2.50

11.12

C

D

E

F

G

H

I

J

K

L

M

4.75

5.61

8.41

5.56

6.24

8.41

0.80

3.31

4.08

1.949

0.974

0.750

0.477

0.80

3.94

4.71

1.949

0.974

0.750

0.477

REV. 04MAY17 D-32

Customer Service (704) 841-6000

www.apolloflowcontrols.com

N

WT.

5/16-18

2.50

39

5/16-18

3.00

55

“Apollo” Flow Controls

87J-700 SERIES DUPLEX STAINLESS STEEL ASME CLASS 300 FLANGED STD. PORT BALL VALVE - 4” THRU 8” FOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3. STANDARD MATERIAL LIST

VARIATIONS AVAILABLE

PART 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21

MATERIAL

Body Retainer Ball Stem Packing Gland Stem Seals Seats Gland Screws Gland Plate Adapter Screw Handle Adapter Stem Bearing Stop Stop Screw Lock Plate Body Seal Grounding Spring Body Joint Stud Body Joint Nut Adapter Screw Pipe Handle

ASTM A995 4A ASTM A995 4A ASTM A276/A479 Alloy 2205 or A995 4A ASTM A276/A479 Alloy 2205 ASTM A276 Type 316 PTFE RPTFE ASTM A193 B8 Class 1 316 SS 18-8 SS 316 SS RPTFE ASTM A276 Type 316 316 SS 302 or 304 SS RPTFE SS, ASTM 313 ASTM A193 Grade B8M ASTM A194 Grade 8 302 or 304 SS Galvanized Steel (not Shown)

• 87H - Hastelloy • 87N - Nickel • 87S - 304L SS

OPTIONS AVAILABLE: (MORE INFORMATION IN SECTION J)

• Minimum quantities apply • To specify an option, replace the “01” standard suffix with the suffix of the option. • To specify multiple options, replace the “01” suffix with the desired suffixes in the numerical order shown below. NOTE: Not all suffixes can be combined together. (SUFFIX)

OPTION

-01 -14-21-

Standard Configuration Side Vented Ball (Uni-Directional) UHMWPE Seats Graphite packing, spiral wound graphite body seal, RPTFE bearing (fire safe “by design”) PTFE Seats and Seals No Lubrication. Assembled Dry. Oxygen Cleaned MPTFE Seats and Graphite Packing (Fire Safe) Drilled and Tapped Purge Ports with Plugs 4” Extended Bonnet 316 SS Spiral Wound Gaskets w/PTFE Filler Live Loaded (Lever) Live Loaded (Gear, Actuator) Multi-Seal (Super TFE) Flat Face Flanges Double Packed 4” Extended Bonnet Double Packed 4” Extended Bonnet with Monitoring Port CE Marking. See Page D-3 “Product Approvals” for availability. Garlock EVSP Stem Packing w/Spiral Wound Graphite Gasket (Fire Safe by Design) PCTFE Stem Bearing Gear Operator with Standard Handwheel Gear Operator with Standard Handwheel & Locking Device Gear Operator with Oversize Handwheel Gear Operator with Oversize Handwheel & Locking Device Positive Material Identification With Test Certificate Tested to API Spec 6D

-24-35-49-57-65-69-70-73-76-77-80-82-90-9P-CE-EP-KF-MG-MH-MJ-MK-MP-TC-TD-

Pressure/Temperature Ratings - Page M-28, Graph No. 41

ACTUATOR MOUNTING

DIMENSIONS PRODUCT NUMBER 87J-70A-01

SIZE

A

B

C

D

E

F

G

H

I

J

K

L

M

N

WT.

4”

3.00

12.00

5.68

8.80

4.06

0.50

4.75

5.95

2.840

1.420

1.250

0.725

3/8-16

4.00

95

87J-70C-01

6”

4.00

15.88

7.38

9.99

5.25

0.50

5.94

7.13

2.840

1.420

1.250

0.725

3/8-16

6.00

187

87J-70E-01

8”

6.00

19.75

9.00

13.73

7.30

1.00

7.75

9.48

4.596

2.298

2.000

1.375

3/4-10

8.00

400

“Apollo” Flow Controls

REV. 04MAY17 industrial.apollovalves.com

Customer Service (704) 841-6000

D-33

87J-700 SERIES DUPLEX STAINLESS STEEL ASME CLASS 300 FLANGED STD. PORT BALL VALVE - 10” FOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3. STANDARD MATERIAL LIST

VARIATIONS AVAILABLE

PART 1 2 3 4 5 6 7 8 9 10 11 12 13

MATERIAL

Body Retainer Ball Stem Packing Gland Stem Seals Seats Gland Screws Gland Plate Stem Bearing Body Seal Body Joint Stud Body Joint Nut

ASTM A995 4A ASTM A995 4A ASTM A276/A479 Alloy 2205 or A995 4A ASTM A276/A479 Alloy 2205 ASTM A276 Type 316 PTFE RPTFE ASTM A193 B8 Class 1 316 SS RPTFE RPTFE ASTM A193 Grade B8M ASTM A194 Grade 8

• 87H - Hastelloy • 87N - Nickel • 87S - 304L SS

OPTIONS AVAILABLE: (MORE INFORMATION IN SECTION J)

• Minimum quantities apply • To specify an option, replace the “01” standard suffix with the suffix of the option. • To specify multiple options, replace the “01” suffix with the desired suffixes in the numerical order shown below. NOTE: Not all suffixes can be combined together. (SUFFIX)

OPTION

-01 -14-21-

Standard Configuration (Less Gear Operator) Side Vented Ball (See Page J2) UHMWPE Seats Graphite packing, spiral wound graphite body seal, RPTFE bearing (fire safe “by design”) PTFE Seats and Seals No Lubrication. Assembled Dry. Oxygen Cleaned MPTFE Seats and Graphite Packing (Fire Safe) Drilled and Tapped Purge Ports with Plugs 4” Extended Bonnet Live Loaded 87A/88A Series (Gear, Actuator) Multi-Seal (Super TFE) 87A/88A Series Flat Face Flanges Double Packed 4” Extended Bonnet Double Packed 4” Extended Bonnet with Monitoring Port CE Marking. See Page D-3 “Product Approvals” for availability. Garlock EVSP Stem Packing w/Spiral Wound Graphite Gasket (Fire Safe by Design) PCTFE Stem Bearing Gear Operator with Standard Handwheel Gear Operator with Standard Handwheel & Locking Device Gear Operator with Oversize Handwheel Gear Operator with Oversize Handwheel & Locking Device Positive Material Identification With Test Certificate Tested to API Spec 6D

-24-35-49-57-65-69-70-77-80-82-90-9P-CE-EP-KF-MG-MH-MJ-MK-MP-TC-TD-

ACTUATOR MOUNTING

Pressure/Temperature Ratings - Page M-28, Graph No. 41

DIMENSIONS PRODUCT NUMBER 87J-70G-01

SIZE

A

B

C

D

E

F

G

H

I

J

K

L

M

10”

8.00

22.38

10.69

12.83

9.56

1.00

10.22

4.596

2.298

2.000

1.375

3/4-10

10.00

REV. 04MAY17 D-34

Customer Service (704) 841-6000

www.apolloflowcontrols.com

“Apollo” Flow Controls

87J-900 SERIES DUPLEX STAINLESS STEEL ASME CLASS 300 FLANGED FULL PORT BALL VALVE - 1/2” THRU 1” FOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3. STANDARD MATERIAL LIST

VARIATIONS AVAILABLE

PART (1/2” & 3/4” VALVES) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18

Body Retainer Ball Stem Packing Gland Stem Seals Seats Stem Nut Lever Stem Bearing Stop Body Seal Lockwasher Grounding Spring Grounding Spring Part (1” Valves) Body Retainer Ball Stem Packing Gland Stem Seals Seats Gland Screws Gland Plate Stem Nut Lever Stem Bearing Stop Stop Screw Lock Plate Body Seal Lockwasher Grounding Spring

• • • •

MATERIAL

ASTM A995 4A ASTM A276/A479 Alloy 2205 ASTM A276/A479 Alloy 2205 ASTM A276/A479 Alloy 2205 ASTM A276 Type 316 PTFE RPTFE 300 Series Stainless Steel 300 Series Stainless Steel w/ Vinyl Grip RPTFE 300 Series Stainless Steel RPTFE 300 Series Stainless Steel ASTM A313 Stainless Steel ASTM A313 Stainless Steel MATERIAL ASTM A995 4A ASTM A276/A479 Alloy 2205 ASTM A276/A479 Alloy 2205 ASTM A276/A479 Alloy 2205 ASTM A276 Type 316 PTFE RPTFE ASTM A193 B8 Class 1 302 or 304 SS 316 SS 302 or 304 with Vinyl Grip RPTFE ASTM A276 Type 316 18-8 SS 302 or 304 SS RPTFE 302 or 304 SS SS, ASTM A313

87H - Hastelloy 87M - Monel 87N - Nickel 87S - 304L SS

OPTIONS AVAILABLE: (MORE INFORMATION IN SECTION J)

• Minimum quantities apply • To specify an option, replace the “01” standard suffix with the suffix of the option. • To specify multiple options, replace the “01” suffix with the desired suffixes in the numerical order shown below. NOTE: Not all suffixes can be combined together. (SUFFIX)

OPTION

-01 -04-14-15-21-

Standard Configuration 2.25” Stem Extension (Carbon Steel, Zinc Plated) Side Vented Ball (Uni-Directional) Wheel Handle, Steel UHMWPE Seats Graphite packing, spiral wound graphite body seal, RPTFE bearing (fire safe “by design”) PTFE Seats and Seals PEEK Seats and Graphite Packing No Lubrication. Assembled Dry. Oxygen Cleaned MPTFE Seats and Graphite Packing (Fire Safe) Drilled and Tapped Purge Port with Plugs 4” Extended Bonnet 316 SS Spiral Wound Gaskets w/PTFE Filler Live Loaded (Lever) Live Loaded (Gear, Actuator) Multi-Seal (Super TFE) Flat Face Flanges Double Packed 4” Extended Bonnet Double Packed 4” Extended Bonnet with Monitoring Port CE Marking. See Page D-3 “Product Approvals” for availability. Garlock EVSP Stem Packing w/Spiral Wound Graphite Gasket (Fire Safe by Design) PCTFE Stem Bearing Positive Material Identification With Test Certificate Tested to API Spec 6D

-24-35-38-49-57-65-69-70-73-76-77-80-82-90-9P-CE-EP-KF-MP-TC-TD-

Pressure/Temperature Ratings - Page M-28, Graph No. 41

1/2” & 3/4” VALVES

1” VALVE

DIMENSIONS PRODUCT NUMBER 87J-903-01

SIZE

A

B

C

D

E

F

G

H

I

J

K

L

M

WT.

1/2”

0.50

5.50

3.31

3.31

5.11

0.30

1.09

1.38

1.000

0.500

0.375

0.245

10-24

6

87J-904-01

3/4”

0.75

6.00

3.56

3.89

5.53

0.36

1.65

1.99

1.392

0.696

0.500

0.287

1/4-20

9

87J-905-01

1”

1.00

6.50

3.82

4.62

6.53

0.47

1.62

2.15

1.392

0.696

0.500

0.287

1/4-20

11

“Apollo” Flow Controls

REV. 04MAY17 industrial.apollovalves.com

Customer Service (704) 841-6000

D-35

87J-900 SERIES DUPLEX STAINLESS STEEL ASME CLASS 300 FLANGED FULL PORT BALL VALVE - 1.5” THRU 2.5” FOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3. STANDARD MATERIAL LIST

VARIATIONS AVAILABLE

PART 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20

MATERIAL

Body Retainer Ball Stem Packing Gland Stem Seals Seats Gland Screws Gland Plate Stem Nut Lever Stem Bearing Stop Stop Screw Lock Plate Body Seal Grounding Spring Body Joint Stud Body Joint Nut Lockwasher

ASTM A995 4A ASTM A995 4A ASTM A276/A479 Alloy 2205 or A995 4A ASTM A276/A479 Alloy 2205 ASTM A276/A479 Alloy 2205 PTFE RPTFE ASTM A193 B8 Class 1 316 SS 18-8 SS 316 SS RPTFE ASTM A276 Type 316 316 SS 302 or 304 SS RPTFE SS, ASTM A313 ASTM A193 Grade B8M ASTM A194 Grade 8 302 or 304 SS

• • • •

87H - Hastelloy 87M - Monel 87N - Nickel 87S - 304L SS

OPTIONS AVAILABLE: (MORE INFORMATION IN SECTION J)

• Minimum quantities apply • To specify an option, replace the “01” standard suffix with the suffix of the option. • To specify multiple options, replace the “01” suffix with the desired suffixes in the numerical order shown below. NOTE: Not all suffixes can be combined together. (SUFFIX)

OPTION

-01 -04-14-21-

Standard Configuration 2.25” Stem Extension (Carbon Steel, Zinc Plated) Side Vented Ball (Uni-Directional) UHMWPE Seats Graphite packing, spiral wound graphite body seal, RPTFE bearing (fire safe “by design”) PTFE Seats and Seals PEEK Seats and Graphite Packing (3” Only) No Lubrication. Assembled Dry. Oxygen Cleaned MPTFE Seats and Graphite Packing (Fire Safe) Drilled and Tapped Purge Ports with Plugs 4” Extended Bonnet 316 SS Spiral Wound Gaskets w/PTFE Filler Live Loaded (Lever) Live Loaded (Gear, Actuator) Multi-Seal (Super TFE) Flat Face Flanges Double Packed 4” Extended Bonnet Double Packed 4” Extended Bonnet with Monitoring Port CE Marking. See Page D-3 “Product Approvals” for availability. Garlock EVSP Stem Packing w/Spiral Wound Graphite Gasket (Fire Safe by Design) PCTFE Stem Bearing Gear Operator with Standard Handwheel Gear Operator with Standard Handwheel & Locking Device Gear Operator with Oversize Handwheel Gear Operator with Oversize Handwheel & Locking Device Positive Material Identification With Test Certificate Tested to API Spec 6D

-24-35-38-49-57-65-69-70-73-76-77-80-82-90-9P-CE-EP-KF-MG-MH-MJ-MK-MP-TC-TD-

ACTUATOR MOUNTING

Pressure/Temperature Ratings - Page M-28, Graph No. 41

DIMENSIONS PRODUCT NUMBER 87J-907-01

SIZE

A

B

C

D

E

F

G

H

I

K

L

M

WT.

1.5”

1.50

7.50

3.50

4.62

6.65

0.72

2.41

3.09

1.949

0.974

0.625

0.412

5/16-18

21

87J-908-01

2”

2.00

8.50

4.00

5.61

8.41

0.80

3.31

4.08

1.949

0.974

0.750

0.477

5/16-18

37

87J-909-01

2.5”

2.50

9.50

4.44

6.24

8.41

0.80

3.94

4.71

1.949

0.974

0.750

0.477

5/16-18

57

REV. 04MAY17 D-36

J

Customer Service (704) 841-6000

www.apolloflowcontrols.com

“Apollo” Flow Controls

87J-900 SERIES DUPLEX STAINLESS STEEL ASME CLASS 300 FLANGED FULL PORT BALL VALVE - 3” THRU 6” FOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3. STANDARD MATERIAL LIST

VARIATIONS AVAILABLE

PART 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20

MATERIAL

Body Retainer Ball Stem Packing Gland Stem Seals Seats Gland Screws Gland Plate Adapter Screw Handle Adapter Stem Bearing Stop Stop Screw Lock Plate Body Seal Grounding Spring Body Joint Stud Body Joint Nut Pipe Handle

ASTM A995 4A ASTM A995 4A ASTM A276/A479 Alloy 2205 or A995 4A ASTM A276/A479 Alloy 2205 ASTM A276/A479 Alloy 2205 PTFE RPTFE ASTM A193 B8 Class 1 316 SS 18-8 SS 316 SS RPTFE ASTM A276 Type 316 316 SS 302 or 304 SS RPTFE SS, ASTM A313 ASTM A193 Grade B8M ASTM A194 Grade 8 Galvanized Steel (not shown)

• 87H - Hastelloy • 87N - Nickel • 87S - 304L SS

OPTIONS AVAILABLE: (MORE INFORMATION IN SECTION J)

• Minimum quantities apply • To specify an option, replace the “01” standard suffix with the suffix of the option. • To specify multiple options, replace the “01” suffix with the desired suffixes in the numerical order shown below. NOTE: Not all suffixes can be combined together. (SUFFIX)

OPTION

-01 -14-21-

Standard Configuration Side Vented Ball (Uni-Directional) UHMWPE Seats Graphite packing, spiral wound graphite body seal, RPTFE bearing (fire safe “by design”) PTFE Seats and Seals PEEK Seats and Graphite Packing (3” Only) No Lubrication. Assembled Dry. Oxygen Cleaned MPTFE Seats and Graphite Packing (Fire Safe) Drilled and Tapped Purge Port with Plugs 4” Extended Bonnet 316 SS Spiral Wound Gaskets w/PTFE Filler Live Loaded (Lever) Live Loaded (Gear, Actuator) Multi-Seal (Super TFE) Flat Face Flanges Double Packed 4” Extended Bonnet Double Packed 4” Extended Bonnet with Monitoring Port CE Marking. See Page D-3 “Product Approvals” for availability. Garlock EVSP Stem Packing w/Spiral Wound Graphite Gasket (Fire Safe by Design) PCTFE Stem Bearing Gear Operator with Standard Handwheel Gear Operator with Standard Handwheel & Locking Device Gear Operator with Oversize Handwheel Gear Operator with Oversize Handwheel & Locking Device Positive Material Identification With Test Certificate Tested to API Spec 6D

-24-35-38-49-57-65-69-70-73-76-77-80-82-90-9P-CE-EP-KF-MG-MH-MJ-MK-MP-TC-TD-

ACTUATOR MOUNTING

Pressure/Temperature Ratings - Page M-28, Graph No. 41

DIMENSIONS PRODUCT NUMBER 87J-900-01

SIZE

A

B

C

D

E

F

G

H

I

J

K

L

M

WT.

3”

3.00

11.12

5.24

8.80

4.06

0.50

4.75

5.95

2.840

1.420

1.250

0.725

3/8-16

78

87J-90A-01

4”

4.00

12.00

5.44

9.99

5.25

0.50

5.94

7.13

2.840

1.420

1.250

0.725

3/8-16

133

87J-90C-01

6”

6.00

15.88

6.82

13.73

7.30

1.00

7.75

9.48

4.596

2.298

2.000

1.375

3/4-10

329

“Apollo” Flow Controls

REV. 04MAY17 industrial.apollovalves.com

Customer Service (704) 841-6000

D-37

87J-900 SERIES DUPLEX STAINLESS STEEL ASME CLASS 300 FLANGED FULL PORT BALL VALVE - 8” THRU 12” FOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3. STANDARD MATERIAL LIST

VARIATIONS AVAILABLE

PART 1 2 3 4 5 6 7 8 9 10 11 12 13

MATERIAL

Body Retainer Ball Stem Packing Gland Stem Seals Seats Gland Screws Gland Plate Stem Bearing Body Seal Body Joint Stud Body Joint Nut

ASTM A995 4A ASTM A995 4A ASTM A276/A479 Alloy 2205 or A995 4A ASTM A276/A479 Alloy 2205 ASTM A276 Type 316 PTFE RPTFE ASTM A193 B8 Class 1 316 SS RPTFE RPTFE ASTM A193 Grade B8M ASTM A194 Grade 8

• 87H - Hastelloy • 87N - Nickel • 87S - 304L SS

OPTIONS AVAILABLE: (MORE INFORMATION IN SECTION J)

• Minimum quantities apply • To specify an option, replace the “01” standard suffix with the suffix of the option. • To specify multiple options, replace the “01” suffix with the desired suffixes in the numerical order shown below. NOTE: Not all suffixes can be combined together. (SUFFIX)

OPTION

-01 -14-21-

Standard Configuration Side Vented Ball (Uni-Directional) UHMWPE Seats Graphite packing, spiral wound graphite body seal, RPTFE bearing (fire safe “by design”) PTFE Seats and Seals No Lubrication. Assembled Dry. Oxygen Cleaned MPTFE Seats and Graphite Packing (Fire Safe) Drilled and Tapped Purge Ports with Plugs 4” Extended Bonnet (8” Only) Live Loaded (Gear, Actuator) Multi-Seal (Super TFE) Flat Face Flanges Double Packed 4” Extended Bonnet Double Packed 4” Extended Bonnet with Monitoring Port CE Marking. See Page D-3 “Product Approvals” for availability. Garlock EVSP Stem Packing w/Spiral Wound Graphite Gasket (Fire Safe by Design) PCTFE Stem Bearing Gear Operator with Standard Handwheel Gear Operator with Standard Handwheel & Locking Device Gear Operator with Oversize Handwheel Gear Operator with Oversize Handwheel & Locking Device Positive Material Identification With Test Certificate Tested to API Spec 6D

-24-35-49-57-65-69-70-77-80-82-90-9P-CE-EP-KF-MG-MH-MJ-MK-MP-TC-TD-

ACTUATOR MOUNTING

Pressure/Temperature Ratings - Page M-28, Graph No. 40

10” & 12”

8”

DIMENSIONS PRODUCT NUMBER 87J-90E-01

SIZE

A

B

C

D

E

F

G

8”

8.00

19.75

9.38

12.83

9.56

1.00

10.22

87J-90G-01

10”

10.00

22.38

10.95

18.57

11.33

2.31

12.80

87J-90H-01

12”

12.00

25.50

12.84

20.31

13.40

2.31

14.92

REV. 04MAY17 D-38

Customer Service (704) 841-6000

www.apolloflowcontrols.com

“Apollo” Flow Controls

87K-900 SERIES SUPER DUPLEX STAINLESS STEEL ASME CLASS 150 FLANGED STD. PORT BALL VALVE - 1.5” THRU 2” FOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3. STANDARD MATERIAL LIST

VARIATIONS AVAILABLE

PART 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18

• • • •

MATERIAL

Body Retainer Ball Stem Packing Gland Stem Seals Seats Gland Screws Gland Plate Stem Nut Lever Stem Bearing Stop Stop Screw Lock Plate Body Seal Lockwasher Grounding Spring

ASTM A995 6A ASTM A276/A479 Alloy 2507 ASTM A276/A479 Alloy 2507 ASTM A276/A479 Alloy 2507 ASTM A276 Type 316 PTFE RPTFE ASTM A193 B8 Class 1 302 or 304 SS 316 SS 302 or 304 SS with Vinyl Grip RPTFE ASTM A276 Type 316 18-8 SS 302 or 304 SS RPTFE 302 or 304 SS SS

87H - Hastelloy 87M - Monel (1.5” to 2” only) 87N - Nickel 87S - 304L SS

OPTIONS AVAILABLE: (MORE INFORMATION IN SECTION J)

• Minimum quantities apply • To specify an option, replace the “01” standard suffix with the suffix of the option. • To specify multiple options, replace the “01” suffix with the desired suffixes in the numerical order shown below. NOTE: Not all suffixes can be combined together. (SUFFIX)

OPTION

-01 -04-14-15-21-

Standard Configuration 2.25” Stem Extension (Carbon Steel, Zinc Plated) Side Vented Ball (Uni-Directional) Wheel Handle, Steel UHMWPE Seats Graphite packing, spiral wound graphite body seal, RPTFE bearing (fire safe “by design”) PTFE Seats and Seals PEEK Seats and Graphite Packing No Lubrication. Assembled Dry. Oxygen Cleaned MPTFE Seats and Graphite Packing (Fire Safe) Drilled and Tapped Purge Port with Plug 4” Extended Bonnet 316 SS Spiral Wound Gaskets w/PTFE Filler Live Loaded (Lever) Live Loaded (Gear, Actuator) Multi-Seal (Super TFE) 87A/88A Series Flat Face Flanges Double Packed 4” Extended Bonnet Double Packed 4” Extended Bonnet with Monitoring Port CE Marking. See Page D-3 “Product Approvals” for availability. Garlock EVSP Stem Packing w/Spiral Wound Graphite Gasket (Fire Safe by Design) PCTFE Stem Bearing Positive Material Identification With Test Certificate Tested to API Spec 6D

-24-35-38-49-57-65-69-70-73-76-77-80-82-90-9P-CE-EP-KF-MP-TC-TD-

Pressure/Temperature Ratings - Page M-28, Graph No. 41

ACTUATOR MOUNTING

DIMENSIONS PRODUCT NUMBER 87K-107-01 87K-108-01

SIZE

A

B

C

D

1.5”

1.25

6.50

3.50

2”

1.50

7.00

3.69

“Apollo” Flow Controls

E

F

G

4.85

6.53

0.47

1.85

4.62

6.65

0.72

2.41

H

I

J

K

L

M

N

WT.

2.38

1.392

0.696

0.500

0.287

1/4-20

1.50

9

3.09

1.949

0.974

0.625

0.412

5/16-18

2.00

18

REV. 04MAY17 industrial.apollovalves.com

Customer Service (704) 841-6000

D-39

87K-100 SERIES SUPER DUPLEX STAINLESS STEEL ASME CLASS 150 FLANGED STD. PORT BALL VALVE - 2.5” THRU 3” FOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3. STANDARD MATERIAL LIST

VARIATIONS AVAILABLE

PART 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20

MATERIAL

Body Retainer Ball Stem Packing Gland Stem Seals Seats Gland Screws Gland Plate Stem Nut Lever Stem Bearing Stop Stop Screw Lock Plate Body Seal Grounding Spring Body Joint Stud Body Joint Nut Lockwasher

ASTM A995 6A ASTM A995 6A ASTM A276/A479 Alloy 2507 or A995 6A ASTM A276/A479 Alloy 2507 ASTM A276 Type 316 PTFE RPTFE ASTM A193 B8 Class 1 316 SS 18-8 SS 316 SS RPTFE ASTM A276 Type 316 316 SS 302 or 304 SS RPTFE SS ASTM A193 Grade B8M ASTM A194 Grade 8 302 or 304 SS

• 87H - Hastelloy • 87N - Nickel • 87S - 304L SS

OPTIONS AVAILABLE: (MORE INFORMATION IN SECTION J)

• Minimum quantities apply • To specify an option, replace the “01” standard suffix with the suffix of the option. • To specify multiple options, replace the “01” suffix with the desired suffixes in the numerical order shown below. NOTE: Not all suffixes can be combined together. (SUFFIX)

OPTION

-01 -04-14-21-

Standard Configuration 2.25” Stem Extension (Carbon Steel, Zinc Plated) Side Vented Ball (Uni-Directional) UHMWPE Seats Graphite packing, spiral wound graphite body seal, RPTFE bearing (fire safe “by design”) PTFE Seats and Seals PEEK Seats and Graphite Packing No Lubrication. Assembled Dry. Oxygen Cleaned MPTFE Seats and Graphite Packing (Fire Safe) Cleaned For Industrial Gases Drilled and Tapped Purge Port with Plugs 4” Extended Bonnet 316 SS Spiral Wound Gaskets w/PTFE Filler Live Loaded 87A/88A Series (Lever) Live Loaded (Gear, Actuator) Multi-Seal (Super TFE) 87A/88A Series Flat Face Flanges Double Packed 4” Extended Bonnet Double Packed 4” Extended Bonnet with Monitoring Port CE Marking. See Page D-3 “Product Approvals” for availability. Garlock EVSP Stem Packing w/Spiral Wound Graphite Gasket (Fire Safe by Design) PCTFE Stem Bearing Gear Operator with Standard Handwheel Gear Operator with Standard Handwheel & Locking Device Gear Operator with Oversize Handwheel Gear Operator with Oversize Handwheel & Locking Device Positive Material Identification With Test Certificate Tested to API Spec 6D

-24-35-38-49-57-65-67-69-70-73-76-77-80-82-90-9P-CE-EP-KF-MG-MH-MJ-MK-MP-TC-TD-

Pressure/Temperature Ratings - Page M-28, Graph No. 40

ACTUATOR MOUNTING

DIMENSIONS PRODUCT NUMBER 87K-109-01 87K-100-01

SIZE

A

B

C

2.5” 3”

D

E

F

2.00

7.50

2.50

8.00

G

H

I

J

K

L

M

3.50

5.61

8.41

3.51

6.24

8.41

0.80

3.31

4.08

1.949

0.974

0.750

0.477

5/16-18

2.50

27

0.80

3.94

4.71

1.949

0.974

0.750

0.477

5/16-18

3.00

34

REV. 04MAY17 D-40

Customer Service (704) 841-6000

www.apolloflowcontrols.com

N

WT.

“Apollo” Flow Controls

87K-100 SERIES SUPER DUPLEX STAINLESS STEEL ASME CLASS 150 FLANGED STD. PORT BALL VALVE - 4” THRU 8” FOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3. STANDARD MATERIAL LIST

VARIATIONS AVAILABLE

PART 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21

MATERIAL

Body Retainer Ball Stem Packing Gland Stem Seals Seats Gland Screws Gland Plate Adapter Screw Handle Adapter Stem Bearing Stop Stop Screw Lock Plate Body Seal Grounding Spring Body Joint Stud Body Joint Nut Lockwasher Pipe Handle

ASTM A995 6A ASTM A995 6A ASTM A995 6A or A276/A479 Alloy 2507 ASTM A276/A479 Alloy 2507 ASTM A276 Type 316 PTFE RPTFE ASTM A193 B8 Class 1 316 SS 18-8 SS 316 SS RPTFE ASTM A276 Type 316 316 SS 302 or 304 SS RPTFE SS ASTM A193 Grade B8M ASTM A194 Grade 8 302 or 304 SS Galvanized Steel (not Shown)

• 87H - Hastelloy • 87N - Nickel • 87S - 304L SS

OPTIONS AVAILABLE: (MORE INFORMATION IN SECTION J)

• Minimum quantities apply • To specify an option, replace the “01” standard suffix with the suffix of the option. • To specify multiple options, replace the “01” suffix with the desired suffixes in the numerical order shown below. NOTE: Not all suffixes can be combined together. (SUFFIX)

OPTION

-01 -14-21-

Standard Configuration Side Vented Ball (Uni-Directional) UHMWPE Seats Graphite packing, spiral wound graphite body seal, RPTFE bearing (fire safe “by design”) PTFE Seats and Seals No Lubrication. Assembled Dry. Oxygen Cleaned MPTFE Seats and Graphite Packing (Fire Safe) Cleaned For Industrial Gases Drilled and Tapped Purge Ports with Plugs Extended Bonnet 316 SS Spiral Wound Gaskets w/PTFE Filler Live Loaded (Lever) Live Loaded (Gear, Actuator) Multi-Seal (Super TFE) 87A/88A Series Flat Face Flanges Double Packed 4” Extended Bonnet Double Packed 4” Extended Bonnet with Monitoring Port CE Marking. See Page D-3 “Product Approvals” for availability. Garlock EVSP Stem Packing w/Spiral Wound Graphite Gasket (Fire Safe by Design) PCTFE Stem Bearing Gear Operator with Standard Handwheel Gear Operator with Standard Handwheel & Locking Device Gear Operator with Oversize Handwheel Gear Operator with Oversize Handwheel & Locking Device Positive Material Identification With Test Certificate Tested to API Spec 6D

-24-35-49-57-65-67-69-70-73-76-77-80-82-90-9P-CE-EP-KF-MG-MH-MJ-MK-MP-TC-TD-

Pressure/Temperature Ratings - Page M-28, Graph No. 40

ACTUATOR MOUNTING

DIMENSIONS PRODUCT NUMBER 87K-10A-01

SIZE

A

B

C

D

E

F

G

H

I

J

K

L

M

N

WT.

4”

3.00

9.00

4.18

8.80

3.88

0.50

4.75

5.95

2.840

1.420

1.250

0.725

3/8-16

4.00

73

87K-10C-01

6”

4.00

10.50

4.69

9.99

5.13

0.50

5.94

7.13

2.840

1.420

1.250

0.725

3/8-16

6.00

117

87K-10E-01

8”

6.00

18.00

9.00

13.73

7.00

1.00

7.75

9.48

4.596

2.298

2.000

1.375

3/4-10

8.00

310

“Apollo” Flow Controls

REV. 04MAY17 industrial.apollovalves.com

Customer Service (704) 841-6000

D-41

87K-100 SERIES SUPER DUPLEX STAINLESS STEEL ASME CLASS 150 FLANGED STD. PORT BALL VALVE - 10” FOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3. STANDARD MATERIAL LIST

VARIATIONS AVAILABLE

PART 1 2 3 4 5 6 7 8 9 10 11 12 13

MATERIAL

Body Retainer Ball Stem Packing Gland Stem Seals Seats Gland Screws Gland Plate Stem Bearing Body Seal Body Joint Stud Body Joint Nut

ASTM A995 6A ASTM A995 6A ASTM A276/A479 Alloy 2507 or A995 6A ASTM A276 A995 6A ASTM A276 Type 316 PTFE RPTFE ASTM A193 B8 Class 1 316 SS RPTFE RPTFE ASTM A193 Grade B8M ASTM A194 Grade 8

• 87H - Hastelloy • 87N - Nickel • 87S - 304L SS

OPTIONS AVAILABLE: (MORE INFORMATION IN SECTION J)

• Minimum quantities apply • To specify an option, replace the “01” standard suffix with the suffix of the option. • To specify multiple options, replace the “01” suffix with the desired suffixes in the numerical order shown below. NOTE: Not all suffixes can be combined together. (SUFFIX)

OPTION

-01 -14-21-

Standard Configuration Side Vented Ball (Uni-Directional) UHMWPE Seats Graphite packing, spiral wound graphite body seal, RPTFE bearing (fire safe “by design”) PTFE Seats and Seals No Lubrication. Assembled Dry. Oxygen Cleaned MPTFE Seats and Graphite Packing (Fire Safe) Drilled and Tapped Purge Port with Plugs 4” Extended Bonnet Live Loaded 87A/88A Series (Gear, Actuator) Multi-Seal (Super TFE) Flat Face Flanges Double Packed 4” Extended Bonnet Double Packed 4” Extended Bonnet with Monitoring Port CE Marking. See Page D-3 “Product Approvals” for availability. Garlock EVSP Stem Packing w/Spiral Wound Graphite Gasket (Fire Safe by Design) PCTFE Stem Bearing Gear Operator with Standard Handwheel Gear Operator with Standard Handwheel & Locking Device Gear Operator with Oversize Handwheel Gear Operator with Oversize Handwheel & Locking Device Positive Material Identification With Test Certificate Tested to API Spec 6D

-24-35-49-57-65-69-70-77-80-82-90-9P-CE-EP-KF-MG-MH-MJ-MK-MP-TC-TD-

ACTUATOR MOUNTING

Pressure/Temperature Ratings - Page M-28, Graph No. 40

DIMENSIONS PRODUCT NUMBER 87K-10G-01

SIZE

A

B

C

D

E

F

G

H

I

J

K

L

M

WT.

10”

8.00

21.00

10.37

12.83

9.18

1.00

10.22

4.596

2.298

2.000

1.375

3/4-10

10.00

526

REV. 04MAY17 D-42

Customer Service (704) 841-6000

www.apolloflowcontrols.com

“Apollo” Flow Controls

87K-200 SERIES SUPER DUPLEX STAINLESS STEEL ASME CLASS 150 FLANGED FULL PORT BALL VALVE - 1/2” THRU 1” FOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3. STANDARD MATERIAL LIST

VARIATIONS AVAILABLE

PART (1/2” & 3/4” VALVES) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18

Body Retainer Ball Stem Packing Gland Stem Seals Seats Stem Nut Lever Stem Bearing Stop Body Seal Lockwasher Grounding Spring Grounding Spring Part (1” Valves) Body Retainer Ball Stem Packing Gland Stem Seals Seats Gland Screws Gland Plate Stem Nut Lever Stem Bearing Stop Stop Screw Lock Plate Body Seal Lockwasher Grounding Spring

• • • •

MATERIAL

ASTM A995 6A ASTM A276/A479 Alloy 2507 ASTM A276/A479 Alloy 2507 ASTM A276/ A479 Alloy 2507 ASTM A276 Type 316 PTFE RPTFE 300 Series Stainless Steel 300 Series Stainless Steel w/ Vinyl Grip RPTFE 300 Series Stainless Steel RPTFE 300 Series Stainless Steel ASTM A313 Stainless Steel ASTM A313 Stainless Steel MATERIAL ASTM A995 6A ASTM A276 /A479 Alloy 2507 ASTM A276 /A479 Alloy 2507 ASTM A276 /A479 Alloy 2507 ASTM A276 Type 316 PTFE RPTFE ASTM A193 B8 Class 1 302 or 304 SS 316 SS 302 or 304 with Vinyl Grip RPTFE ASTM A276 Type 316 18-8 SS 302 or 304 SS RPTFE 302 or 304 SS SS, ASTM A313

87H - Hastelloy 87M - Monel 87N - Nickel 87S - 304L SS

OPTIONS AVAILABLE: (MORE INFORMATION IN SECTION J)

• Minimum quantities apply • To specify an option, replace the “01” standard suffix with the suffix of the option. • To specify multiple options, replace the “01” suffix with the desired suffixes in the numerical order shown below. NOTE: Not all suffixes can be combined together. (SUFFIX)

OPTION

-01 -04-14-15-21-

Standard Configuration 2.25” Stem Extension (Carbon Steel, Zinc Plated) Side Vented Ball (Uni-Directional) Wheel Handle, Steel UHMWPE Seats Graphite packing, spiral wound graphite body seal, RPTFE bearing (fire safe “by design”) PTFE Seats and Seals PEEK Seats and Graphite Packing No Lubrication. Assembled Dry. Oxygen Cleaned MPTFE Seats and Graphite Packing (Fire Safe) Drilled and Tapped Purge Port with Plugs 4” Extended Bonnet 316 SS Spiral Wound Gaskets w/PTFE Filler Live Loaded (Lever) Live Loaded (Gear, Actuator) Multi-Seal (Super TFE) Flat Face Flanges Double Packed 4” Extended Bonnet Double Packed 4” Extended Bonnet with Monitoring Port CE Marking. See Page D-3 “Product Approvals” for availability. Garlock EVSP Stem Packing w/Spiral Wound Graphite Gasket (Fire Safe by Design) PCTFE Stem Bearing Positive Material Identification With Test Certificate Tested to API Spec 6D

-24-35-38-49-57-65-69-70-73-76-77-80-82-90-9P-CE-EP-KF-MP-TC-TD-

Pressure/Temperature Ratings - Page M-28, Graph No. 40

1/2” & 3/4” VALVES

1” VALVE

DIMENSIONS PRODUCT NUMBER 87K-203-01

SIZE

A

B

C

D

E

F

G

H

I

J

K

L

M

WT.

1/2”

0.50

4.25

2.06

3.31

5.11

0.30

1.09

1.41

1.00

0.500

0.375

0.245

10-24

5

87K-204-01

3/4”

0.75

4.62

2.18

3.89

5.53

0.36

1.65

1.99

1.392

0.696

0.500

0.287

1/4-20

6

87K-205-01

1”

1.00

5.00

2.32

4.62

6.53

0.47

1.62

2.15

1.392

0.696

0.500

0.287

1/4-20

7

“Apollo” Flow Controls

REV. 04MAY17 industrial.apollovalves.com

Customer Service (704) 841-6000

D-43

87K-200 SERIES SUPER DUPLEX STAINLESS STEEL ASME CLASS 150 FLANGED FULL PORT BALL VALVE - 1.5” THRU 2.5” FOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3. STANDARD MATERIAL LIST

VARIATIONS AVAILABLE

PART 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20

MATERIAL

Body Retainer Ball Stem Packing Gland Stem Seals Seats Gland Screws Gland Plate Adapter Screw Lever Stem Bearing Stop Stop Screw Lock Plate Body Seal Grounding Spring Body Joint Stud Body Joint Nut Lockwasher

ASTM A995 6A ASTM A995 6A ASTM A276/A479 Alloy 2507 or A995 6A ASTM A276/ A479 Alloy 2507 ASTM A276 Type 316 PTFE RPTFE ASTM A193 B8 Class 1 316 SS 18-8 SS 316 SS RPTFE ASTM A276 Type 316 316 SS 302 or 304 SS RPTFE SS ASTM A193 Grade B8M ASTM A194 Grade 8 302 or 304 SS

• • • •

87H - Hastelloy 87M - Monel 87N - Nickel 87S - 304L SS

OPTIONS AVAILABLE: (MORE INFORMATION IN SECTION J)

• Minimum quantities apply • To specify an option, replace the “01” standard suffix with the suffix of the option. • To specify multiple options, replace the “01” suffix with the desired suffixes in the numerical order shown below. NOTE: Not all suffixes can be combined together. (SUFFIX)

OPTION

-01 -04-14-21-

Standard Configuration 2.25” Stem Extension (Carbon Steel, Zinc Plated) Side Vented Ball (Uni-Directional) UHMWPE Seats Graphite packing, spiral wound graphite body seal, RPTFE bearing (fire safe “by design”) PTFE Seats and Seals PEEK Seats and Graphite Packing No Lubrication. Assembled Dry. Oxygen Cleaned MPTFE Seats and Graphite Packing (Fire Safe) Drilled and Tapped Purge Ports with Plugs 4” Extended Bonnet 316 SS Spiral Wound Gaskets w/PTFE Filler Live Loaded (Lever) Live Loaded (Gear, Actuator) Multi-Seal (Super TFE) Flat Face Flanges Double Packed 4” Extended Bonnet Double Packed 4” Extended Bonnet with Monitoring Port CE Marking. See Page D-3 “Product Approvals” for availability. Garlock EVSP Stem Packing w/Spiral Wound Graphite Gasket (Fire Safe by Design) PCTFE Stem Bearing Gear Operator with Standard Handwheel Gear Operator with Standard Handwheel & Locking Device Gear Operator with Oversize Handwheel Gear Operator with Oversize Handwheel & Locking Device Positive Material Identification With Test Certificate Tested to API Spec 6D

-24-35-38-49-57-65-69-70-73-76-77-80-82-90-9P-CE-EP-KF-MG-MH-MJ-MK-MP-TC-TD-

Pressure/Temperature Ratings - Page M-28, Graph No. 40

ACTUATOR MOUNTING

DIMENSIONS PRODUCT NUMBER 87K-207-01

SIZE

A

B

C

D

E

F

G

H

I

K

L

M

WT.

1.5”

1.50

6.50

3.00

4.62

6.65

0.72

2.41

3.09

1.949

0.974

0.625

0.412

5/16-18

14

87K-208-01

2”

2.00

7.00

3.04

5.61

8.41

0.80

3.31

4.08

1.949

0.974

0.750

0.477

5/16-18

25

87K-209-01

2.5”

2.50

7.50

3.34

6.24

8.41

0.80

3.94

4.71

1.949

0.974

0.750

0.477

5/16-18

30

REV. 04MAY17 D-44

J

Customer Service (704) 841-6000

www.apolloflowcontrols.com

“Apollo” Flow Controls

87K-200 SERIES SUPER DUPLEX STAINLESS STEEL ASME CLASS 150 FLANGED FULL PORT BALL VALVE - 3” THRU 6” FOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3. STANDARD MATERIAL LIST

VARIATIONS AVAILABLE

PART 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20

MATERIAL

Body Retainer Ball Stem Packing Gland Stem Seals Seats Gland Screws Gland Plate Adapter Screw Handle Adapter Stem Bearing Stop Stop Screw Lock Plate Body Seal Grounding Spring Body Joint Stud Body Joint Nut Pipe Handle

ASTM A995 6A ASTM A995 6A ASTM A276/A479 Alloy 2507 or A995 6A ASTM A276/A479 Alloy 2507 ASTM A276 Type 316 PTFE RPTFE ASTM A193 B8 Class 1 316 SS 18-8 SS 316 with Vinyl Grip RPTFE ASTM A276 Type 316 316 SS 302 or 304 SS RPTFE SS ASTM A193 Grade B8M ASTM A194 Grade 8 Galvanized Steel (not shown)

• 87H - Hastelloy • 87N - Nickel • 87S - 304L SS

OPTIONS AVAILABLE: (MORE INFORMATION IN SECTION J)

• Minimum quantities apply • To specify an option, replace the “01” standard suffix with the suffix of the option. • To specify multiple options, replace the “01” suffix with the desired suffixes in the numerical order shown below. NOTE: Not all suffixes can be combined together. (SUFFIX)

OPTION

-01 -14-21-

Standard Configuration Side Vented Ball (Uni-Directional) UHMWPE Seats Graphite packing, spiral wound graphite body seal, RPTFE bearing (fire safe “by design”) PTFE Seats and Seals PEEK Seats and Graphite Packing No Lubrication. Assembled Dry. Oxygen Cleaned MPTFE Seats and Graphite Packing (Fire Safe) Drilled and Tapped Purge Ports with Plugs 4” Extended Bonnet 316 SS Spiral Wound Gaskets w/PTFE Filler Live Loaded (Lever) Live Loaded (Gear, Actuator) Multi-Seal (Super TFE) Flat Face Flanges Double Packed 4” Extended Bonnet Double Packed 4” Extended Bonnet with Monitoring Port CE Marking. See Page D-3 “Product Approvals” for availability. Garlock EVSP Stem Packing w/Spiral Wound Graphite Gasket (Fire Safe by Design) PCTFE Stem Bearing Gear Operator with Standard Handwheel Gear Operator with Standard Handwheel & Locking Device Gear Operator with Oversize Handwheel Gear Operator with Oversize Handwheel & Locking Device Positive Material Identification With Test Certificate Tested to API Spec 6D

-24-35-38-49-57-65-69-70-73-76-77-80-82-90-9P-CE-EP-KF-MG-MH-MJ-MK-MP-TC-TD-

Pressure/Temperature Ratings - Page M-28, Graph No. 40

ACTUATOR MOUNTING

DIMENSIONS PRODUCT NUMBER 87K-200-01

SIZE

A

B

C

D

E

F

G

H

I

J

K

L

M

WT. 60

3”

3.00

8.00

3.68

8.80

3.88

0.50

4.75

5.95

2.840

1.420

1.250

0.725

3/8-16

87K-20A-01

4”

4.00

9.00

3.94

9.99

5.13

0.50

5.94

7.13

2.840

1.420

1.250

0.725

3/8-16

91

87K-20C-01

6”

6.00

15.50

7.19

13.73

7.00

1.00

7.75

9.48

4.596

2.298

2.000

1.375

3/4-10

248

“Apollo” Flow Controls

REV. 04MAY17 industrial.apollovalves.com

Customer Service (704) 841-6000

D-45

87K-200 SERIES SUPER DUPLEX STAINLESS STEEL ASME CLASS 150 FLANGED FULL PORT BALL VALVE - 8” THRU 12” FOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3. STANDARD MATERIAL LIST

VARIATIONS AVAILABLE

PART 1 2 3 4 5 6 7 8 9 10 11 12 13

MATERIAL

Body Retainer Ball Stem Packing Gland Stem Seals Seats Gland Screws Gland Plate Stem Bearing Body Seal Body Joint Stud Body Joint Nut

ASTM A995 6A ASTM A995 6A ASTM A276/A479 Alloy or A995 6A ASTM A276/A479 Alloy 2507 ASTM A276 Type 316 PTFE RPTFE ASTM A193 B8 Class 1 316 SS RPTFE RPTFE ASTM A193 Grade B8M ASTM A194 Grade 8

• 87H - Hastelloy • 87N - Nickel • 87S - 304L SS

OPTIONS AVAILABLE: (MORE INFORMATION IN SECTION J)

• Minimum quantities apply • To specify an option, replace the “01” standard suffix with the suffix of the option. • To specify multiple options, replace the “01” suffix with the desired suffixes in the numerical order shown below. NOTE: Not all suffixes can be combined together. (SUFFIX)

OPTION

-01 -14-21-

Standard Configuration Side Vented Ball (Uni-Directional) UHMWPE Seats Graphite packing, spiral wound graphite body seal, RPTFE bearing (fire safe “by design”) PTFE Seats and Seals No Lubrication. Assembled Dry. Oxygen Cleaned MPTFE Seats and Graphite Packing (Fire Safe) Drilled and Tapped Purge Ports with Plugs 4” Extended Bonnet (8” Only) Live Loaded (Gear, Actuator) Multi-Seal (Super TFE) Flat Face Flanges Double Packed 4” Extended Bonnet Double Packed 4” Extended Bonnet with Monitoring Port CE Marking. See Page D-3 “Product Approvals” for availability. Garlock EVSP Stem Packing w/Spiral Wound Graphite Gasket (Fire Safe by Design) PCTFE Stem Bearing Gear Operator with Standard Handwheel Gear Operator with Standard Handwheel & Locking Device Gear Operator with Oversize Handwheel Gear Operator with Oversize Handwheel & Locking Device Positive Material Identification With Test Certificate Tested to API Spec 6D

-24-35-49-57-65-69-70-77-80-82-90-9P-CE-EP-KF-MG-MH-MJ-MK-MP-TC-TD-

ACTUATOR MOUNTING

Pressure/Temperature Ratings - Page M-28, Graph No. 40

10” & 12”

8”

DIMENSIONS PRODUCT NUMBER 87K-20E-01

SIZE

A

B

C

D

E

F

G

8”

8.00

18.00

8.88

12.83

9.18

1.00

10.22

87K-20G-01

10”

10.00

21.00

10.26

18.57

11.33

2.31

12.80

87K-20H-01

12”

12.00

24.00

12.09

20.31

13.40

2.31

14.92

REV. 04MAY17 D-46

Customer Service (704) 841-6000

www.apolloflowcontrols.com

“Apollo” Flow Controls

87K-700 SERIES SUPER DUPLEX STAINLESS STEEL ASME CLASS 300 FLANGED STD. PORT BALL VALVE - 1.5” THRU 2” FOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3. STANDARD MATERIAL LIST

VARIATIONS AVAILABLE

PART 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18

• • • •

MATERIAL

Body Retainer Ball Stem Packing Gland Stem Seals Seats Gland Screws Gland Plate Stem Nut Lever Stem Bearing Stop Stop Screw Lock Plate Body Seal Lockwasher Grounding Spring

ASTM A995 6A ASTM A276/A479 Alloy 2507 ASTM A276/A479 Alloy 2507 ASTM A276/A479 Alloy 2507 ASTM A276 Type 316 PTFE RPTFE ASTM A193 B8 Class 1 302 & 304 SS 316 SS 302 & 304 SS with Vinyl Grip RPTFE ASTM A276 Type 316 18-8 SS 302 or 304 SS RPTFE 302 or 304 SS SS

87H - Hastelloy 87M - Monel 87N - Nickel 87S - 304L SS

OPTIONS AVAILABLE: (MORE INFORMATION IN SECTION J)

• Minimum quantities apply • To specify an option, replace the “01” standard suffix with the suffix of the option. • To specify multiple options, replace the “01” suffix with the desired suffixes in the numerical order shown below. NOTE: Not all suffixes can be combined together. (SUFFIX)

OPTION

-01 -04-14-15-21-

Standard Configuration 2.25” Stem Extension (Carbon Steel, Zinc Plated) Side Vented Ball (See Page J-2) Wheel Handle, Steel UHMWPE Seats Graphite packing, spiral wound graphite body seal, RPTFE bearing (fire safe “by design”) PTFE Seats and Seals PEEK Seats and Graphite Packing No Lubrication. Assembled Dry. Oxygen Cleaned MPTFE Seats and Graphite Packing (Fire Safe) Drilled and Tapped Purge Ports with Plugs 4” Extended Bonnet 316 SS Spiral Wound Gaskets w/PTFE Filler Live Loaded (Lever) Live Loaded (Gear, Actuator) Multi-Seal (Super TFE) Flat Face Flanges Double Packed 4” Extended Bonnet Double Packed 4” Extended Bonnet with Monitoring Port CE Marking. See Page D-3 “Product Approvals” for availability. Garlock EVSP Stem Packing w/Spiral Wound Graphite Gasket (Fire Safe by Design) PCTFE Stem Bearing Positive Material Identification With Test Certificate Tested to API Spec 6D

-24-35-38-49-57-65-69-70-73-76-77-80-82-90-9P-CE-EP-KF-MP-TC-TD-

Pressure/Temperature Ratings - Page M-28, Graph No. 41

ACTUATOR MOUNTING

DIMENSIONS PRODUCT NUMBER 87K-707-01A 87K-708-01

SIZE

A

B

C

D

E

F

G

H

I

J

K

L

M

N

WT.

1.5”

1.25

7.50

4.50

4.85

6.53

0.47

1.85

2.38

1.392

0.696

0.500

0.287

1/4-20

1.50

15.7

2”

1.50

8.50

5.19

4.62

6.65

0.72

2.41

3.09

1.949

0.974

0.625

0.412

5/16-18

2.00

24.0

“Apollo” Flow Controls

REV. 04MAY17 industrial.apollovalves.com

Customer Service (704) 841-6000

D-47

87K-700 SERIES SUPER DUPLEX STAINLESS STEEL ASME CLASS 300 FLANGED STD. PORT BALL VALVE - 2.5” THRU 3” FOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3. STANDARD MATERIAL LIST

VARIATIONS AVAILABLE

PART 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20

MATERIAL

Body Retainer Ball Stem Packing Gland Stem Seals Seats Gland Screws Gland Plate Stem Nut Lever Stem Bearing Stop Stop Screw Lock Plate Body Seal Grounding Spring Body Joint Stud Body Joint Nut Lockwasher

ASTM A995 6A ASTM A995 6A ASTM A276/A479 Alloy 2507 or A995 6A ASTM A276/A479 Alloy 2507 ASTM A276 Type 316 PTFE RPTFE ASTM A193 B8 Class 1 316 SS 18-8 SS 316 with Vinyl Grip RPTFE ASTM A276 Type 316 316 SS 302 or 304 SS RPTFE SS ASTM A193 Grade B8M ASTM A194 Grade 8 302 or 304 SS

• 87H - Hastelloy • 87N - Nickel • 87S - 304L SS

OPTIONS AVAILABLE: (MORE INFORMATION IN SECTION J)

• Minimum quantities apply • To specify an option, replace the “01” standard suffix with the suffix of the option. • To specify multiple options, replace the “01” suffix with the desired suffixes in the numerical order shown below. NOTE: Not all suffixes can be combined together. (SUFFIX)

OPTION

-01 -04-14-21-

Standard Configuration 2.25” Stem Extension (Carbon Steel, Zinc Plated) Side Vented Ball (Uni-Directional) UHMWPE Seats Graphite packing, spiral wound graphite body seal, RPTFE bearing (fire safe “by design”) PTFE Seats and Seals PEEK Seats and Graphite Packing No Lubrication. Assembled Dry. Oxygen Cleaned MPTFE Seats and Graphite Packing (Fire Safe) Drilled and Tapped Purge Ports with Plugs 4” Extended Bonnet 316 SS Spiral Wound Gaskets w/PTFE Filler Live Loaded (Lever) Live Loaded (Gear, Actuator) Multi-Seal (Super TFE) Flat Face Flanges Double Packed 4” Extended Bonnet Double Packed 4” Extended Bonnet with Monitoring Port CE Marking. See Page D-3 “Product Approvals” for availability. Garlock EVSP Stem Packing w/Spiral Wound Graphite Gasket (Fire Safe by Design) PCTFE Stem Bearing Gear Operator with Standard Handwheel Gear Operator with Standard Handwheel & Locking Device Gear Operator with Oversize Handwheel Gear Operator with Oversize Handwheel & Locking Device Positive Material Identification With Test Certificate Tested to API Spec 6D

-24-35-38-49-57-65-69-70-73-76-77-80-82-90-9P-CE-EP-KF-MG-MH-MJ-MK-MP-TC-TD-

Pressure/Temperature Ratings - Page M-28, Graph No. 41

ACTUATOR MOUNTING

DIMENSIONS PRODUCT NUMBER 87K-709-01 87K-700-01

SIZE

A

B

2.5”

2.00

9.50

3”

2.50

11.12

C

D

E

F

G

H

I

J

K

L

M

4.75

5.61

8.41

5.56

6.24

8.41

0.80

3.31

4.08

1.949

0.974

0.750

0.477

0.80

3.94

4.71

1.949

0.974

0.750

0.477

REV. 04MAY17 D-48

Customer Service (704) 841-6000

www.apolloflowcontrols.com

N

WT.

5/16-18

2.50

39

5/16-18

3.00

55

“Apollo” Flow Controls

87K-700 SERIES SUPER DUPLEX STAINLESS STEEL ASME CLASS 300 FLANGED STD. PORT BALL VALVE - 4” THRU 8” FOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3. STANDARD MATERIAL LIST

VARIATIONS AVAILABLE

PART 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21

MATERIAL

Body Retainer Ball Stem Packing Gland Stem Seals Seats Gland Screws Gland Plate Adapter Screw Handle Adapter Stem Bearing Stop Stop Screw Lock Plate Body Seal Grounding Spring Body Joint Stud Body Joint Nut Adapter Screw Pipe Handle

ASTM A995 6A ASTM A276/A479 Alloy 2507 ASTM A276/A479 Alloy 2507 or A995 6A ASTM A276/A479 Alloy 2507 ASTM A276 Type 316 PTFE RPTFE ASTM A193 B8 Class 1 316 SS 18-8 SS 316 SS RPTFE ASTM A276 Type 316 316 SS 302 or 304 SS RPTFE SS ASTM A193 Grade B8M ASTM A194 Grade 8 18-8 SS Galvanized Steel (not shown)

• 87H - Hastelloy • 87N - Nickel • 87S - 304L SS

OPTIONS AVAILABLE: (MORE INFORMATION IN SECTION J)

• Minimum quantities apply • To specify an option, replace the “01” standard suffix with the suffix of the option. • To specify multiple options, replace the “01” suffix with the desired suffixes in the numerical order shown below. NOTE: Not all suffixes can be combined together.

(SUFFIX) -01 -14-21-24-35-49-57-65-69-70-73-76-77-80-82-90-9P-CE-EP-KF-MG-MH-MJ-MK-MP-TC-TD-

OPTION Standard Configuration Side Vented Ball (Uni-Directional) UHMWPE Seats Graphite packing, spiral wound graphite body seal, RPTFE bearing (fire safe “by design”) PTFE Seats and Seals No Lubrication. Assembled Dry. Oxygen Cleaned MPTFE Seats and Graphite Packing (Fire Safe) Drilled and Tapped Purge Ports with Plugs 4” Extended Bonnet 316 SS Spiral Wound Gaskets w/PTFE Filler Live Loaded (Lever) Live Loaded (Gear, Actuator) Multi-Seal (Super TFE) Flat Face Flanges Double Packed 4” Extended Bonnet Double Packed 4” Extended Bonnet with Monitoring Port CE Marking. See Page D-3 “Product Approvals” for availability. Garlock EVSP Stem Packing w/Spiral Wound Graphite Gasket (Fire Safe by Design) PCTFE Stem Bearing Gear Operator with Standard Handwheel Gear Operator with Standard Handwheel & Locking Device Gear Operator with Oversize Handwheel Gear Operator with Oversize Handwheel & Locking Device Positive Material Identification With Test Certificate Tested to API Spec 6D

Pressure/Temperature Ratings - Page M-28, Graph No. 41

ACTUATOR MOUNTING

DIMENSIONS PRODUCT NUMBER 87K-70A-01

SIZE

A

B

C

D

E

F

G

H

I

J

K

L

M

N

WT.

4”

3.00

12.00

5.68

8.80

4.06

0.50

4.75

5.95

2.840

1.420

1.250

0.725

3/8-16

4.00

95

87K-70C-01

6”

4.00

15.88

7.38

9.99

5.25

0.50

5.94

7.13

2.840

1.420

1.250

0.725

3/8-16

6.00

187

87K-70E-01

8”

6.00

19.75

9.00

13.73

7.30

1.00

7.75

9.48

4.596

2.298

2.000

1.375

3/4-10

8.00

400

“Apollo” Flow Controls

REV. 04MAY17 industrial.apollovalves.com

Customer Service (704) 841-6000

D-49

87K-700 SERIES SUPER DUPLEX STAINLESS STEEL ASME CLASS 300 FLANGED STD. PORT BALL VALVE - 10” FOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3. STANDARD MATERIAL LIST

VARIATIONS AVAILABLE

PART 1 2 3 4 5 6 7 8 9 10 11 12 13

• 87H - Hastelloy • 87N - Nickel • 87S - 304L SS

MATERIAL

Body Retainer Ball Stem Packing Gland Stem Seals Seats Gland Screws Gland Plate Stem Bearing Body Seal Body Joint Stud Body Joint Nut

ASTM A995 6A ASTM A995 6A ASTM A276/A479 Alloy 2507 ASTM A276/A479 Alloy 2507 ASTM A276 Type 316 PTFE RPTFE ASTM A193 B8 Class 1 316 SS RPTFE RPTFE ASTM A193 Grade B8M ASTM A194 Grade 8

OPTIONS AVAILABLE: (MORE INFORMATION IN SECTION J)

• Minimum quantities apply • To specify an option, replace the “01” standard suffix with the suffix of the option. • To specify multiple options, replace the “01” suffix with the desired suffixes in the numerical order shown below. NOTE: Not all suffixes can be combined together. (SUFFIX)

OPTION

-01 -14-21-

Standard Configuration (Less Gear Operator) Side Vented Ball (See Page J2) UHMWPE Seats Graphite packing, spiral wound graphite body seal, RPTFE bearing (fire safe “by design”) PTFE Seats and Seals No Lubrication. Assembled Dry. Oxygen Cleaned MPTFE Seats and Graphite Packing (Fire Safe) Drilled and Tapped Purge Ports with Plugs 4” Extended Bonnet Live Loaded 87A/88A Series (Gear, Actuator) Multi-Seal (Super TFE) 87A/88A Series Flat Face Flanges Double Packed 4” Extended Bonnet Double Packed 4” Extended Bonnet with Monitoring Port CE Marking. See Page D-3 “Product Approvals” for availability. Garlock EVSP Stem Packing w/Spiral Wound Graphite Gasket (Fire Safe by Design) PCTFE Stem Bearing Gear Operator with Standard Handwheel Gear Operator with Standard Handwheel & Locking Device Gear Operator with Oversize Handwheel Gear Operator with Oversize Handwheel & Locking Device Positive Material Identification With Test Certificate Tested to API Spec 6D

-24-35-49-57-65-69-70-77-80-82-90-9P-CE-EP-KF-MG-MH-MJ-MK-MP-TC-TD-

ACTUATOR MOUNTING

Pressure/Temperature Ratings - Page M-28, Graph No. 41

DIMENSIONS PRODUCT NUMBER 87K-70G-01

SIZE

A

B

C

D

E

F

G

H

I

J

K

L

M

10”

8.00

22.38

10.69

12.83

9.56

1.00

10.22

4.596

2.298

2.000

1.375

3/4-10

10.00

REV. 04MAY17 D-50

Customer Service (704) 841-6000

www.apolloflowcontrols.com

“Apollo” Flow Controls

87K-900 SERIES SUPER DUPLEX STAINLESS STEEL ASME CLASS 300 FLANGED FULL PORT BALL VALVE - 1/2” THRU 1” FOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3. STANDARD MATERIAL LIST

VARIATIONS AVAILABLE

PART (1/2” & 3/4” VALVES) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

Body Retainer Ball Stem Packing Gland Stem Seals Seats Stem Nut Lever Stem Bearing Stop Body Seal Lockwasher Grounding Spring Grounding Spring

ASTM A995 6A ASTM A276/A479 Alloy 2507 ASTM A276/A479 Alloy 2507 ASTM A276/A479 Alloy 2507 ASTM A276 Type 316 PTFE RPTFE 300 Series Stainless Steel 300 Series Stainless Steel w/ Vinyl Grip RPTFE 300 Series Stainless Steel RPTFE 300 Series Stainless Steel ASTM A313 Stainless Steel ASTM A313 Stainless Steel

PART (1” VALVES) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18

• • • •

MATERIAL

OPTIONS AVAILABLE: (MORE INFORMATION IN SECTION J)

• Minimum quantities apply • To specify an option, replace the “01” standard suffix with the suffix of the option. • To specify multiple options, replace the “01” suffix with the desired suffixes in the numerical order shown below. NOTE: Not all suffixes can be combined together. (SUFFIX)

OPTION

-01 -04-14-15-21-

Standard Configuration 2.25” Stem Extension (Carbon Steel, Zinc Plated) Side Vented Ball (Uni-Directional) Wheel Handle, Steel UHMWPE Seats Graphite packing, spiral wound graphite body seal, RPTFE bearing (fire safe “by design”) PTFE Seats and Seals PEEK Seats and Graphite Packing No Lubrication. Assembled Dry. Oxygen Cleaned MPTFE Seats and Graphite Packing (Fire Safe) Drilled and Tapped Purge Port with Plugs 4” Extended Bonnet 316 SS Spiral Wound Gaskets w/PTFE Filler Live Loaded (Lever) Live Loaded (Gear, Actuator) Multi-Seal (Super TFE) Flat Face Flanges Double Packed 4” Extended Bonnet Double Packed 4” Extended Bonnet with Monitoring Port CE Marking. See Page D-3 “Product Approvals” for availability. Garlock EVSP Stem Packing w/Spiral Wound Graphite Gasket (Fire Safe by Design) PCTFE Stem Bearing Positive Material Identification With Test Certificate Tested to API Spec 6D

-24-

MATERIAL

Body Retainer Ball Stem Packing Gland Stem Seals Seats Gland Screws Gland Plate Stem Nut Lever Stem Bearing Stop Stop Screw Lock Plate Body Seal Lockwasher Grounding Spring

87H - Hastelloy 87M - Monel 87N - Nickel 87S - 304L SS

ASTM A351 CF8M ASTM A276 Type 316 ASTM A276 Type 316 ASTM A276 Type 316 ASTM A276 Type 316 PTFE RPTFE ASTM A193 B8 Class 1 302 or 304 SS 316 SS 302 or 304 with Vinyl Grip RPTFE ASTM A276 Type 316 18-8 SS 302 or 304 SS RPTFE 302 or 304 SS SS

-35-38-49-57-65-69-70-73-76-77-80-82-90-9P-CE-EP-KF-MP-TC-TD-

Pressure/Temperature Ratings - Page M-28, Graph No. 41

1/2” & 3/4” VALVES

1” VALVE

DIMENSIONS PRODUCT NUMBER 87K-903-01

SIZE

A

B

C

D

E

F

G

H

I

J

K

L

M

WT. 6

1/2”

0.50

5.50

3.31

3.31

5.11

0.30

1.09

1.38

1.000

0.500

0.375

0.245

10-24

87K-904-01

3/4”

0.75

6.00

3.56

3.89

5.53

0.36

1.65

1.99

1.392

0.696

0.500

0.287

1/4-20

9

87K-905-01

1”

1.00

6.50

3.82

4.62

6.53

0.47

1.62

2.15

1.392

0.696

0.500

0.287

1/4-20

11

“Apollo” Flow Controls

REV. 04MAY17 industrial.apollovalves.com

Customer Service (704) 841-6000

D-51

87K-900 SERIES SUPER DUPLEX STAINLESS STEEL ASME CLASS 300 FLANGED FULL PORT BALL VALVE - 1.5” THRU 2.5” FOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3. STANDARD MATERIAL LIST

VARIATIONS AVAILABLE

PART 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20

MATERIAL

Body Retainer Ball Stem Packing Gland Stem Seals Seats Gland Screws Gland Plate Stem Nut Lever Stem Bearing Stop Stop Screw Lock Plate Body Seal Grounding Spring Body Joint Stud Body Joint Nut Lockwasher

ASTM A995 6A ASTM A995 6A ASTM A276/A479 Alloy 2507 or A995 6A ASTM A276/A479 Alloy 2507 ASTM A276 Type 316 PTFE RPTFE ASTM A193 B8 Class 1 316 SS 18-8 SS 316 SS RPTFE ASTM A276 Type 316 316 SS 302 or 304 SS RPTFE SS ASTM A193 Grade B8M ASTM A194 Grade 8 302 or 304 SS

• • • •

87H - Hastelloy 87M - Monel 87N - Nickel 87S - 304L SS

OPTIONS AVAILABLE: (MORE INFORMATION IN SECTION J)

• Minimum quantities apply • To specify an option, replace the “01” standard suffix with the suffix of the option. • To specify multiple options, replace the “01” suffix with the desired suffixes in the numerical order shown below. NOTE: Not all suffixes can be combined together. (SUFFIX)

OPTION

-01 -04-14-21-

Standard Configuration 2.25” Stem Extension (Carbon Steel, Zinc Plated) Side Vented Ball (Uni-Directional) UHMWPE Seats Graphite packing, spiral wound graphite body seal, RPTFE bearing (fire safe “by design”) PTFE Seats and Seals PEEK Seats and Graphite Packing (3” Only) No Lubrication. Assembled Dry. Oxygen Cleaned MPTFE Seats and Graphite Packing (Fire Safe) Drilled and Tapped Purge Ports with Plugs 4” Extended Bonnet 316 SS Spiral Wound Gaskets w/PTFE Filler Live Loaded (Lever) Live Loaded (Gear, Actuator) Multi-Seal (Super TFE) Flat Face Flanges Double Packed 4” Extended Bonnet Double Packed 4” Extended Bonnet with Monitoring Port CE Marking. See Page D-3 “Product Approvals” for availability. Garlock EVSP Stem Packing w/Spiral Wound Graphite Gasket (Fire Safe by Design) PCTFE Stem Bearing Gear Operator with Standard Handwheel Gear Operator with Standard Handwheel & Locking Device Gear Operator with Oversize Handwheel Gear Operator with Oversize Handwheel & Locking Device Positive Material Identification With Test Certificate Tested to API Spec 6D

-24-35-38-49-57-65-69-70-73-76-77-80-82-90-9P-CE-EP-KF-MG-MH-MJ-MK-MP-TC-TD-

Pressure/Temperature Ratings - Page M-28, Graph No. 41

ACTUATOR MOUNTING

DIMENSIONS PRODUCT NUMBER 87K-907-01

SIZE

A

B

C

D

E

F

G

H

I

K

L

M

WT.

1.5”

1.50

7.50

3.50

4.62

6.65

0.72

2.41

3.09

1.949

0.974

0.625

0.412

5/16-18

21

87K-908-01

2”

2.00

8.50

4.00

5.61

8.41

0.80

3.31

4.08

1.949

0.974

0.750

0.477

5/16-18

37

87K-909-01

2.5”

2.50

9.50

4.44

6.24

8.41

0.80

3.94

4.71

1.949

0.974

0.750

0.477

5/16-18

57

REV. 04MAY17 D-52

J

Customer Service (704) 841-6000

www.apolloflowcontrols.com

“Apollo” Flow Controls

87K-900 SERIES SUPER DUPLEX STAINLESS STEEL ASME CLASS 300 FLANGED FULL PORT BALL VALVE - 3” THRU 6” FOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3. STANDARD MATERIAL LIST

VARIATIONS AVAILABLE

PART 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20

MATERIAL

Body Retainer Ball Stem Packing Gland Stem Seals Seats Gland Screws Gland Plate Adapter Screw Handle Adapter Stem Bearing Stop Stop Screw Lock Plate Body Seal Grounding Spring Body Joint Stud Body Joint Nut Pipe Handle

ASTM A995 6A ASTM A995 6A ASTM A276/A479 Alloy 2507 or A995 6A ASTM A276/A479 Alloy 2507 ASTM A276 Type 316 PTFE RPTFE ASTM A193 B8 Class 1 316 SS 18-8 SS 316 SS RPTFE ASTM A276 Type 316 316 SS 302 or 304 SS RPTFE SS ASTM A193 Grade B8M ASTM A194 Grade 8 Galvanized Steel (not shown)

• 87H - Hastelloy • 87N - Nickel • 87S - 304L SS

OPTIONS AVAILABLE: (MORE INFORMATION IN SECTION J)

• Minimum quantities apply • To specify an option, replace the “01” standard suffix with the suffix of the option. • To specify multiple options, replace the “01” suffix with the desired suffixes in the numerical order shown below. NOTE: Not all suffixes can be combined together. (SUFFIX)

OPTION

-01 -14-21-

Standard Configuration Side Vented Ball (Uni-Directional) UHMWPE Seats Graphite packing, spiral wound graphite body seal, RPTFE bearing (fire safe “by design”) PTFE Seats and Seals PEEK Seats and Graphite Packing (3” Only) No Lubrication. Assembled Dry. Oxygen Cleaned MPTFE Seats and Graphite Packing (Fire Safe) Drilled and Tapped Purge Port with Plugs 4” Extended Bonnet 316 SS Spiral Wound Gaskets w/PTFE Filler Live Loaded (Lever) Live Loaded (Gear, Actuator) Multi-Seal (Super TFE) Flat Face Flanges Double Packed 4” Extended Bonnet Double Packed 4” Extended Bonnet with Monitoring Port CE Marking. See Page D-3 “Product Approvals” for availability. Garlock EVSP Stem Packing w/Spiral Wound Graphite Gasket (Fire Safe by Design) PCTFE Stem Bearing Gear Operator with Standard Handwheel Gear Operator with Standard Handwheel & Locking Device Gear Operator with Oversize Handwheel Gear Operator with Oversize Handwheel & Locking Device Positive Material Identification With Test Certificate Tested to API Spec 6D

-24-35-38-49-57-65-69-70-73-76-77-80-82-90-9P-CE-EP-KF-MG-MH-MJ-MK-MP-TC-TD-

Pressure/Temperature Ratings - Page M-28, Graph No. 41

ACTUATOR MOUNTING

DIMENSIONS PRODUCT NUMBER 87K-900-01

SIZE

A

B

C

D

E

F

G

H

I

J

K

L

M

WT.

3”

3.00

11.12

5.24

8.80

4.06

0.50

4.75

5.95

2.840

1.420

1.250

0.725

3/8-16

78

87K-90A-01

4”

4.00

12.00

5.44

9.99

5.25

0.50

5.94

7.13

2.840

1.420

1.250

0.725

3/8-16

133

87K-90C-01

6”

6.00

15.88

6.82

13.73

7.30

1.00

7.75

9.48

4.596

2.298

2.000

1.375

3/4-10

329

“Apollo” Flow Controls

REV. 04MAY17 industrial.apollovalves.com

Customer Service (704) 841-6000

D-53

87K-900 SERIES SUPER DUPLEX STAINLESS STEEL ASME CLASS 300 FLANGED FULL PORT BALL VALVE - 8” THRU 12” FOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3. STANDARD MATERIAL LIST

VARIATIONS AVAILABLE

PART 1 2 3 4 5 6 7 8 9 10 11 12 13

MATERIAL

Body Retainer Ball Stem Packing Gland Stem Seals Seats Gland Screws Gland Plate Stem Bearing Body Seal Body Joint Stud Body Joint Nut

ASTM A995 6A ASTM A995 6A ASTM A276/A479 Alloy 2507 or A995 6A ASTM A276/A479 Alloy 2507 ASTM A276 Type 316 PTFE RPTFE ASTM A193 B8 Class 1 316 SS RPTFE RPTFE ASTM A193 Grade B8M ASTM A194 Grade 8

• 87H - Hastelloy • 87N - Nickel • 87S - 304L SS

OPTIONS AVAILABLE: (MORE INFORMATION IN SECTION J)

• Minimum quantities apply • To specify an option, replace the “01” standard suffix with the suffix of the option. • To specify multiple options, replace the “01” suffix with the desired suffixes in the numerical order shown below. NOTE: Not all suffixes can be combined together. (SUFFIX)

OPTION

-01 -14-21-

Standard Configuration Side Vented Ball (Uni-Directional) UHMWPE Seats Graphite packing, spiral wound graphite body seal, RPTFE bearing (fire safe “by design”) PTFE Seats and Seals No Lubrication. Assembled Dry. Oxygen Cleaned MPTFE Seats and Graphite Packing (Fire Safe) Drilled and Tapped Purge Ports with Plugs 4” Extended Bonnet (8” Only) Live Loaded (Gear, Actuator) Multi-Seal (Super TFE) Flat Face Flanges Double Packed 4” Extended Bonnet Double Packed 4” Extended Bonnet with Monitoring Port CE Marking. See Page D-3 “Product Approvals” for availability. Garlock EVSP Stem Packing w/Spiral Wound Graphite Gasket (Fire Safe by Design) PCTFE Stem Bearing Gear Operator with Standard Handwheel Gear Operator with Standard Handwheel & Locking Device Gear Operator with Oversize Handwheel Gear Operator with Oversize Handwheel & Locking Device Positive Material Identification With Test Certificate Tested to API Spec 6D

-24-35-49-57-65-69-70-77-80-82-90-9P-CE-EP-KF-MG-MH-MJ-MK-MP-TC-TD-

ACTUATOR MOUNTING

Pressure/Temperature Ratings - Page M-28, Graph No. 41

10” & 12”

8”

DIMENSIONS PRODUCT NUMBER 87K-90E-01

SIZE

A

B

C

D

E

F

G

8”

8.00

19.75

9.38

12.83

9.56

1.00

10.22

87K-90G-01

10”

10.00

22.38

10.95

18.57

11.33

2.31

12.80

87K-90H-01

12”

12.00

25.50

12.84

20.31

13.40

2.31

14.92

REV. 04MAY17 D-54

Customer Service (704) 841-6000

www.apolloflowcontrols.com

“Apollo” Flow Controls

88A-100 SERIES CARBON STEEL ASME CLASS 150 FLANGED STD. PORT BALL VALVE - 1.5” THRU 2” FOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3. STANDARD MATERIAL LIST

VARIATIONS AVAILABLE

PART 2

Body Retainer

3

Ball

4

Stem Packing Gland Stem Seals Seats Gland Screws Gland Plate Stem Nut Lever Stem Bearing Stop Stop Screw Lock Plate Body Seal Lockwasher Grounding Spring

1

5 6 7 8 9 10 11 12 13 14 15 16 17 18

MATERIAL

ASTM A216 WCB ASTM A108 Type 1215 ASTM A108, Carbon Steel, Chrome Plated or ASTM A276, Type 316 Stainless Steel ASTM A108 Type 1215 ASTM A108 Type 1215 PTFE RPTFE ASTM A193 B7 302 or 304 SS 316 SS ASTM A366 Steel with Vinyl Grip RPTFE ASTM A108 Type 1215 SAE J429 Grade 2 ASTM A366 Steel RPTFE 302 or 304 SS SS

• 88A-140 Series (316 SS Ball & Stem) • 88A-130 Series (Ni-Cu Ball & Stem)

OPTIONS AVAILABLE: (MORE INFORMATION IN SECTION J)

• Minimum quantities apply • To specify an option, replace the “01” standard suffix with the suffix of the option. • To specify multiple options, replace the “01” suffix with the desired suffixes in the numerical order shown below. NOTE: Not all suffixes can be combined together. (SUFFIX)

-01 -04-10-14-15-21-24-26-35-38-49-65-67-69-70-73-76-77-80-82-90-9P-CE-EP-KF-TC-TD-UL-

OPTION

Standard Configuration 2.25” Stem Extension (Carbon Steel, Zinc Plated) SS Lever and Nut Side Vented Ball (Uni-Directional). Not available with plated CS ball. Wheel Handle, Steel UHMWPE Seats Graphite packing, spiral wound graphite body seal, RPTFE bearing (API 607, 5th edition, ISO 10497-5:2004) Chlorine Service. Vented. Special Cleaning. Assembled dry. (for CS, Hastelloy and Ni-Cu valves. Ball must be Hastelloy or Ni-CU) PTFE Seats and Seals PEEK Seats and Graphite Packing No Lubrication. Assembled Dry. MPTFE Seats and Graphite Packing (Fire Safe) Cleaned For Industrial Gases Drilled and Tapped Purge Port with Plug 4” Extended Bonnet 316 SS Spiral Wound Gaskets w/PTFE Filler Live Loaded (Lever) Live Loaded (Gear, Actuator) Multi-Seal (Super TFE) Flat Face Flanges Double Packed 4” Extended Bonnet Double Packed 4” Extended Bonnet with Monitoring Port CE Marking. See Page D-3 “Product Approvals” for availability. Garlock EVSP Stem Packing w/Spiral Wound Graphite Gasket (Fire Safe by Design) PCTFE Stem Bearing With Test Certificate Tested to API Spec 6D UL & CSA Listed (w/Markings)

Pressure/Temperature Ratings - Page M-9, Graph No. 1

ACTUATOR MOUNTING

DIMENSIONS PRODUCT NUMBER 88A-107-01A 88A-108-01

SIZE

A

B

C

D

E

F

G

H

I

J

K

L

M

N

WT.

1.5”

1.25

6.50

3.50

4.85

6.53

0.47

1.85

2.38

1.392

0.696

0.500

0.287

1/4-20

1.50

9

2”

1.50

7.00

3.69

4.62

6.65

0.72

2.41

3.09

1.949

0.974

0.625

0.412

5/16-18

2.00

18

“Apollo” Flow Controls

REV. 04MAY17 industrial.apollovalves.com

Customer Service (704) 841-6000

D-55

88A-100 SERIES CARBON STEEL ASME CLASS 150 FLANGED STD. PORT BALL VALVE - 2.5” THRU 3” FOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3. STANDARD MATERIAL LIST

VARIATIONS AVAILABLE

PART 2

Body Retainer

3

Ball

4

Stem Packing Gland Stem Seals Seats Gland Screws Gland Plate Stem Nut Lever Stem Bearing Stop Stop Screw Lock Plate Body Seal Grounding Spring Body Joint Stud Body Joint Nut Lockwasher

1

5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20

• 88A-140 Series (316 SS Ball & Stem) • 88A-130 Series (Ni-Cu Ball & Stem)

MATERIAL

ASTM A216 WCB ASTM A216 WCB ASTM A108 Type 1215 or ASTM A216 WCB Chrome Plated ASTM A108 Type 1215 ASTM A108 Type 1215 PTFE RPTFE ASTM A193 B7 302 or 304 SS ASTM A194 Grade 8 ASTM A366 Steel with Vinyl Grip RPTFE ASTM A108 Type 1215 SAE J429 Grade 2 ASTM A366 Steel RPTFE SS ASTM A193 Grade B7 ASTM A194 Grade 2H 302 or 304 SS

OPTIONS AVAILABLE: (MORE INFORMATION IN SECTION J)

• Minimum quantities apply • To specify an option, replace the “01” standard suffix with the suffix of the option. • To specify multiple options, replace the “01” suffix with the desired suffixes in the numerical order shown below. NOTE: Not all suffixes can be combined together. (SUFFIX)

-01 -04-10-14-21-24-26-35-38-49-59-65-67-69-70-73-76-77-80-82-90-9P-CE-EP-KF-MG-MH-MJ-MK-TC-TD-UL-

ACTUATOR MOUNTING

OPTION

Standard Configuration 2.25” Stem Extension (Carbon Steel, Zinc Plated) SS Lever and Nut Side Vented Ball (Uni-Directional). Not available with plated CS ball. UHMWPE Seats Graphite packing, spiral wound graphite body seal, RPTFE bearing (API 607, 6th edition, ISO 10497:2010) Chlorine Service. Vented. Special Cleaning. Assembled dry. (for CS, Hastelloy and Ni-Cu valves. Ball must be Hastelloy or Ni-CU) PTFE Seats and Seals PEEK Seats and Graphite Packing No Lubrication. Assembled Dry. SS External Trim MPTFE Seats and Graphite Packing (Fire Safe) Cleaned For Industrial Gases Drilled and Tapped Purge Port with Plugs 4” Extended Bonnet 316 SS Spiral Wound Gaskets w/PTFE Filler Live Loaded (Lever) Live Loaded (Gear, Actuator) Multi-Seal (Super TFE) Flat Face Flanges Double Packed 4” Extended Bonnet Double Packed 4” Extended Bonnet with Monitoring Port CE Marking. See Page D-3 “Product Approvals” for availability. Garlock EVSP Stem Packing w/Spiral Wound Graphite Gasket (Fire Safe by Design) PCTFE Stem Bearing Gear Operator with Standard Handwheel Gear Operator with Standard Handwheel & Locking Device Gear Operator with Oversize Handwheel Gear Operator with Oversize Handwheel & Locking Device With Test Certificate Tested to API Spec 6D UL & CSA Listed (w/Markings)

Pressure/Temperature Ratings - Page M-9, Graph No. 1

DIMENSIONS PRODUCT NUMBER 88A-109-01 88A-100-01

SIZE

A

B

C

D

E

F

G

H

I

J

K

L

M

N

2.5”

2.00

7.50

3.50

5.61

8.41

0.80

3.31

4.08

1.949

0.974

0.750

0.477

5/16-18

2.50

27

3”

2.50

8.00

3.51

6.24

8.41

0.80

3.94

4.71

1.949

0.974

0.750

0.477

5/16-18

3.00

34

REV. 04MAY17 D-56

Customer Service (704) 841-6000

www.apolloflowcontrols.com

WT.

“Apollo” Flow Controls

88A-100 SERIES CARBON STEEL ASME CLASS 150 FLANGED STD. PORT BALL VALVE - 4” THRU 8” FOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3. STANDARD MATERIAL LIST

VARIATIONS AVAILABLE

PART 2

Body Retainer

3

Ball

4

Stem Packing Gland Stem Seals Seats Gland Screws Gland Plate Adaptor Screw Handle Adapter Stem Bearing Stop Stop Screw Lock Plate Body Seal Grounding Spring Body Joint Stud Body Joint Nut Adapter Screw Pipe Handle

1

5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21

• 88A-140 Series (316 SS Ball & Stem) • 88A-130 Series (Ni-Cu Ball & Stem)

MATERIAL

ASTM A216 WCB ASTM A216 WCB ASTM A108 Type 1215 or ASTM A216 WCB Chrome Plated ASTM A108 Type 1215 ASTM A108 Type 1215 PTFE RPTFE ASTM A193 B7 316 SS 316 SS ASTM A366 Steel with Vinyl Grip RPTFE ASTM A108 Type 1215 SAE J429 Grade 2 ASTM A366 Steel RPTFE SS ASTM A193 Grade B7 ASTM A194 Grade 2H 18-8 SS Galvanized Steel (not shown)

OPTIONS AVAILABLE: (MORE INFORMATION IN SECTION J)

• Minimum quantities apply • To specify an option, replace the “01” standard suffix with the suffix of the option. • To specify multiple options, replace the “01” suffix with the desired suffixes in the numerical order shown below. NOTE: Not all suffixes can be combined together. (SUFFIX)

-01 -14-21-24-26-35-49-59-65-67-69-70-73-76-77-80-82-90-9P-CE-EP-KF-MG-MH-MJ-MK-TC-TD-UL-

OPTION

Standard Configuration Side Vented Ball (Uni-Directional). Not available with plated CS ball. UHMWPE Seats Fire Safe - graphite packing & seals (API 607, 5th edition, ISO 104975:2004) 4” & 6” (API 607, 6th edition, ISO 0497:2010) 8” Chlorine Service. Vented. Special Cleaning. Assembled dry. (for CS, Hastelloy and Ni-Cu valves. Ball must be Hastelloy or Ni-CU) PTFE Seats and Seals No Lubrication. Assembled Dry. SS External Trim MPTFE Seats and Graphite Packing (Fire Safe) Cleaned For Industrial Gases Drilled and Tapped Purge Ports with Plugs 4” Extended Bonnet 316 SS Spiral Wound Gaskets w/PTFE Filler Live Loaded (Lever) Live Loaded (Gear, Actuator) Multi-Seal (Super TFE) Flat Face Flanges Double Packed 4” Extended Bonnet Double Packed 4” Extended Bonnet with Monitoring Port CE Marking. See Page D-3 “Product Approvals” for availability. Garlock EVSP Stem Packing w/Spiral Wound Graphite Gasket (Fire Safe by Design) PCTFE Stem Bearing Gear Operator with Standard Handwheel Gear Operator with Standard Handwheel & Locking Device Gear Operator with Oversize Handwheel Gear Operator with Oversize Handwheel & Locking Device With Test Certificate Tested to API Spec 6D UL & CSA Listed (w/Markings)

Pressure/Temperature Ratings - Page M-9, Graph No. 1

ACTUATOR MOUNTING

DIMENSIONS PRODUCT NUMBER 88A-10A-01

SIZE

A

B

C

D

E

F

G

H

I

J

K

L

M

N

WT.

4”

3.00

9.00

4.18

8.80

3.88

0.50

4.75

5.95

2.840

1.420

1.250

0.725

3/8-16

4.00

73

88A-10C-01

6”

4.00

10.50

4.69

9.99

5.13

0.50

5.94

7.13

2.840

1.420

1.250

0.725

3/8-16

6.00

117

88A-10E-01

8”

6.00

18.00

9.00

13.73

7.00

1.00

7.75

9.48

4.596

2.298

2.000

1.375

3/4-10

8.00

310

“Apollo” Flow Controls

REV. 04MAY17 industrial.apollovalves.com

Customer Service (704) 841-6000

D-57

88A-100 SERIES CARBON STEEL ASME CLASS 150 FLANGED STD. PORT BALL VALVE - 10” FOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3. STANDARD MATERIAL LIST

VARIATIONS AVAILABLE

PART 2

Body Retainer

3

Ball

4

Stem Packing Gland Stem Seals Seats Gland Screws Gland Plate Stem Bearing Body Seal Body Joint Stud Body Joint Nut

1

5 6 7 8 9 10 11 12 13

• 88A-130 Series (Ni-Cu Ball & Stem) • 88A-140 Series (316 SS Ball & Stem)

MATERIAL

ASTM A216 WCB ASTM A216 WCB ASTM A108 Type 1215 or 216 WCB Chrome Plated ASTM A108 Type 1215 ASTM A108 Type 1215 PTFE RPTFE ASTM A193 B7 316 SS RPTFE RPTFE ASTM A193 Grade B7 ASTM A194 Grade 2H

OPTIONS AVAILABLE: (MORE INFORMATION IN SECTION J)

• Minimum quantities apply • To specify an option, replace the “01” standard suffix with the suffix of the option. • To specify multiple options, replace the “01” suffix with the desired suffixes in the numerical order shown below. NOTE: Not all suffixes can be combined together. (SUFFIX)

-01 -14-21-24-26-35-49-65-67-69-70-77-80-82-90-9P-CE-EP-KF-MG-MH-MJ-MK-TC-TD-UL-

OPTION

Standard Configuration Side Vented Ball (Uni-Directional). Not available with plated CS ball. UHMWPE Seats Graphite packing, spiral wound graphite body seal, RPTFE bearing (API 607, 5th edition, ISO 10497-5:2004) Chlorine Service. Vented. Special Cleaning. Assembled dry. (for CS, Hastelloy and Ni-Cu valves. Ball must be Hastelloy or Ni-CU) PTFE Seats and Seals No Lubrication. Assembled Dry. MPTFE Seats and Graphite Packing (Fire Safe) Cleaned For Industrial Gases Drilled and Tapped Purge Port with Plugs 4” Extended Bonnet Live Loaded (Gear, Actuator) Multi-Seal (Super TFE) Flat Face Flanges Double Packed 4” Extended Bonnet Double Packed 4” Extended Bonnet with Monitoring Port CE Marking. See Page D-3 “Product Approvals” for availability. Garlock EVSP Stem Packing w/Spiral Wound Graphite Gasket (Fire Safe by Design) PCTFE Stem Bearing Gear Operator with Standard Handwheel Gear Operator with Standard Handwheel & Locking Device Gear Operator with Oversize Handwheel Gear Operator with Oversize Handwheel & Locking Device With Test Certificate Tested to API Spec 6D UL & CSA Listed (w/Markings)

Pressure/Temperature Ratings - Page M-9, Graph No. 1

ACTUATOR MOUNTING

DIMENSIONS PRODUCT NUMBER 88A-10G-01

SIZE

A

B

C

D

E

F

G

H

I

J

K

L

M

10”

8.00

21.00

10.37

12.83

9.18

1.00

10.22

4.596

2.298

2.000

1.375

3/4-10

10.00

REV. 04MAY17 D-58

Customer Service (704) 841-6000

www.apolloflowcontrols.com

“Apollo” Flow Controls

88A-200 SERIES CARBON STEEL ASME CLASS 150 FLANGED FULL PORT BALL VALVE - 1/2” THRU 1” FOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3. STANDARD MATERIAL LIST

VARIATIONS AVAILABLE

PART (1/2”& 3/4” VALVES) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

Body Retainer Ball Stem Packing Gland Stem Seals Seats Stem Nut Lever Stem Bearing Stop Body Seal Lock Washer Grounding Spring Grounding Spring

ASTM A216 WCB ASTM A108 Type 1215 ASTM A108 Type 1215 ASTM A108 Type 1215 ASTM A108 Type 1215 PTFE RPTFE 300 Series Stainless Steel 300 Series Stainless Steel w/Vinyl Grip RPTFE 300 Series Stainless Steel RPTFE 300 Series Stainless Steel ASTM A313 Stainless Steel ASTM A313 Stainless Steel

PART (1” VALVES) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18

• 88A-240 Series (316 SS Ball & Stem) • 88A-230 Series (Ni-Cu Ball & Stem)

MATERIAL

OPTIONS AVAILABLE: (MORE INFORMATION IN SECTION J)

• Minimum quantities apply • To specify an option, replace the “01” standard suffix with the suffix of the option. • To specify multiple options, replace the “01” suffix with the desired suffixes in the numerical order shown below. NOTE: Not all suffixes can be combined together. (SUFFIX)

-01 -04-10-14-15-21-24-

MATERIAL

Body Retainer Ball Stem Packing Gland Stem Seals Seats Gland Screws Gland Plate Stem Nut Lever Stem Bearing Stop Stop Screw Lock Plate Body Seal Lockwasher Grounding Spring

-26-

ASTM A216 WCB ASTM A108 Type 1215 ASTM A108 Type 1215 Chrome Plated ASTM A108 Type 1215 ASTM A108 Type 1215 PTFE RPTFE ASTM A193 B7 302 or 304 SS 316 SS ASTM A366 Steel with Vinyl Grip RPTFE ASTM A108 Type 1215 SAE J429 Grade 2 ASTM A366 Steel RPTFE 302 or 304 SS SS

-35-38-49-65-67-69-70-73-76-77-80-82-90-9P-CE-EP-KF-TC-TD-UL-

Pressure/Temperature Ratings - Page M-9, Graph No. 1

1/2” & 3/4” VALVES

OPTION

Standard Configuration 2.25” Stem Extension (Carbon Steel, Zinc Plated) SS Lever and Nut Side Vented Ball (Uni-Directional). Not available with plated CS ball. Wheel Handle, Steel UHMWPE Seats Graphite packing, spiral wound graphite body seal, RPTFE bearing (API 607, 5th edition, ISO 10497-5:2004) Chlorine Service. Vented. Special Cleaning. Assembled dry. (for CS, Hastelloy and Ni-Cu valves. Ball must be Hastelloy or Ni-CU) PTFE Seats and Seals PEEK Seats and Graphite Packing No Lubrication. Assembled Dry. MPTFE Seats and Graphite Packing (Fire Safe) Cleaned For Industrial Gases Drilled and Tapped Purge Port with Plug 4” Extended Bonnet 316 SS Spiral Wound Gaskets w/PTFE Filler Live Loaded (Lever) Live Loaded (Gear, Actuator) Multi-Seal (Super TFE) Flat Face Flanges Double Packed 4” Extended Bonnet Double Packed 4” Extended Bonnet with Monitoring Port CE Marking. See Page D-3 “Product Approvals” for availability. Garlock EVSP Stem Packing w/Spiral Wound Graphite Gasket (Fire Safe by Design) PCTFE Stem Bearing With Test Certificate Tested to API Spec 6D UL & CSA Listed (w/Markings)

1” VALVE

DIMENSIONS PRODUCT NUMBER 88A-203-01

SIZE

A

B

C

D

E

F

G

H

I

J

K

L

M

WT.

1/2”

0.50

4.25

2.06

3.31

5.11

0.30

1.09

1.41

1.002

0.501

0.375

0.245

10-24

5

88A-204-01

3/4”

0.75

4.62

2.18

3.89

5.53

0.36

1.65

1.99

1.392

0.696

0.500

0.287

1/4-20

6

88A-205-01

1”

1.00

5.00

2.32

4.62

6.53

0.47

1.62

2.15

1.392

0.696

0.500

0.287

1/4-20

7

“Apollo” Flow Controls

REV. 04MAY17 industrial.apollovalves.com

Customer Service (704) 841-6000

D-59

88A-200 SERIES CARBON STEEL ASME CLASS 150 FLANGED FULL PORT BALL VALVE - 1.5” THRU 2.5” FOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3. STANDARD MATERIAL LIST

VARIATIONS AVAILABLE

PART 2

Body Retainer

3

Ball

4

Stem Packing Gland Stem Seals Seats Gland Screws Gland Plate Stem Nut Lever Stem Bearing Stop Stop Screw Lock Plate Body Seal Grounding Spring Body Joint Stud Body Joint Nut Lockwasher

1

5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20

• 88A-240 Series (316 SS Ball & Stem) • 88A-230 Series (Ni-Cu Ball & Stem)

MATERIAL

ASTM A216 WCB ASTM A216 WCB ASTM A108 Type 1215 or ASTM A216 WCB Chrome Plated ASTM A108 Type 1215 ASTM A108 Type 1215 PTFE RPTFE ASTM A193 B7 302 & 304 SS ASTM A194 Grade 8l ASTM A366 Steel with Vinyl Grip RPTFE ASTM A108 Type 1215 SAE J429 Grade 2 ASTM A366 Steel RPTFE SS ASTM A193 Grade B7 ASTM A194 Grade 2H 302 or 304 SS

OPTIONS AVAILABLE: (MORE INFORMATION IN SECTION J)

• Minimum quantities apply • To specify an option, replace the “01” standard suffix with the suffix of the option. • To specify multiple options, replace the “01” suffix with the desired suffixes in the numerical order shown below. NOTE: Not all suffixes can be combined together. (SUFFIX)

-01 -04-10-14-15-21-24-26-35-38-49-59-65-67-69-70-73-76-77-80-82-90-9P-CE-EP-KF-MG-MH-MJ-MK-TC-TD-UL-

ACTUATOR MOUNTING

OPTION

Standard Configuration 2.25” Stem Extension (Carbon Steel, Zinc Plated) SS Lever and Nut Side Vented Ball (Uni-Directional). Not available with plated CS ball. Wheel Handle, Steel UHMWPE Seats Fire Safe - graphite packing & seals (API 607, 5th edition, ISO 104975:2004) 1.5” & 2” (API 607, 6th edition, ISO 10497:2010) 2.5” Chlorine Service. Vented. Special Cleaning. Assembled dry. (for CS, Hastelloy and Ni-Cu valves. Ball must be Hastelloy or Ni-CU) PTFE Seats and Seals PEEK Seats and Graphite Packing No Lubrication. Assembled Dry. SS External Trim MPTFE Seats and Graphite Packing (Fire Safe) Cleaned For Industrial Gases Drilled and Tapped Purge Ports with Plugs 4” Extended Bonnet 316 SS Spiral Wound Gaskets w/PTFE Filler Live Loaded (Lever) Live Loaded (Gear, Actuator) Multi-Seal (Super TFE) Flat Face Flanges Double Packed 4” Extended Bonnet Double Packed 4” Extended Bonnet with Monitoring Port CE Marking. See Page D-3 “Product Approvals” for availability. Garlock EVSP Stem Packing w/Spiral Wound Graphite Gasket (Fire Safe by Design) PCTFE Stem Bearing Gear Operator with Standard Handwheel Gear Operator with Standard Handwheel & Locking Device Gear Operator with Oversize Handwheel Gear Operator with Oversize Handwheel & Locking Device With Test Certificate Tested to API Spec 6D UL & CSA Listed (w/Markings)

Pressure/Temperature Ratings - Page M-9, Graph No. 1

DIMENSIONS PRODUCT NUMBER 88A-207-01

SIZE

A

B

C

D

E

F

G

H

I

J

K

L

M

1.5”

1.50

6.50

3.00

4.62

6.65

0.72

2.41

3.09

1.949

0.974

0.625

0.412

5/16-18

14

88A-208-01

2”

2.00

7.00

3.04

5.61

8.41

0.80

3.31

4.08

1.949

0.974

0.750

0.477

5/16-18

25

88A-209-01

2.5”

2.50

7.50

3.34

6.24

8.41

0.80

3.94

4.71

1.949

0.974

0.750

0.477

5/16-18

30

REV. 04MAY17 D-60

Customer Service (704) 841-6000

www.apolloflowcontrols.com

WT.

“Apollo” Flow Controls

88A-200 SERIES CARBON STEEL ASME CLASS 150 FLANGED FULL PORT BALL VALVE - 3” THRU 6” FOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3. STANDARD MATERIAL LIST

VARIATIONS AVAILABLE

PART 2

Body Retainer

3

Ball

4

Stem Packing Gland Stem Seals Seats Gland Screws Gland Plate Adapter Screw Handle Adapter Stem Bearing Stop Stop Screw Lock Plate Body Seal Grounding Spring Body Joint Stud Body Joint Nut Pipe Handle

1

5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20

• 88A-240 Series (316 SS Ball & Stem) • 88A-230 Series (Ni-Cu Ball & Stem)

MATERIAL

ASTM A216 WCB ASTM A216 WCB ASTM A108 Type 1215 or A216 WCB Chrome Plated ASTM A108 Type 1215 ASTM A108 Type 1215 PTFE RPTFE ASTM A193 B7 316 SS 316 SS ASTM A366 Steel with Vinyl Grip RPTFE ASTM A108 Type 1215 SAE J429 Grade 2 ASTM A366 Steel RPTFE SS ASTM A193 Grade B7 ASTM A194 Grade 2H Galvanized Steel (not shown)

OPTIONS AVAILABLE: (MORE INFORMATION IN SECTION J)

• Minimum quantities apply • To specify an option, replace the “01” standard suffix with the suffix of the option. • To specify multiple options, replace the “01” suffix with the desired suffixes in the numerical order shown below. NOTE: Not all suffixes can be combined together. (SUFFIX)

-01 -14-21-24-26-35-38-49-59-65-67-69-70-73-76-77-80-82-90-9P-CE-EP-KF-MG-MH-MJ-MK-TC-TD-UL-

OPTION

Standard Configuration Side Vented Ball (Uni-Directional). Not available with plated CS ball. UHMWPE Seats Graphite packing, spiral wound graphite body seal, RPTFE bearing (API 607, 6th edition, ISO 10497:2010) Chlorine Service. Vented. Special Cleaning. Assembled dry. (for CS, Hastelloy and Ni-Cu valves. Ball must be Hastelloy or Ni-CU) PTFE Seats and Seals PEEK Seats and Graphite Packing No Lubrication. Assembled Dry. SS External Trim MPTFE Seats and Graphite Packing (Fire Safe) Cleaned For Industrial Gases Drilled and Tapped Purge Port with Plug 4” Extended Bonnet 316 SS Spiral Wound Gaskets w/PTFE Filler Live Loaded (Lever) Live Loaded (Gear, Actuator) Multi-Seal (Super TFE) Flat Face Flanges Double Packed 4” Extended Bonnet Double Packed 4” Extended Bonnet with Monitoring Port CE Marking. See Page D-3 “Product Approvals” for availability. Garlock EVSP Stem Packing w/Spiral Wound Graphite Gasket (Fire Safe by Design) PCTFE Stem Bearing Gear Operator with Standard Handwheel Gear Operator with Standard Handwheel & Locking Device Gear Operator with Oversize Handwheel Gear Operator with Oversize Handwheel & Locking Device With Test Certificate Tested to API Spec 6D UL & CSA Listed (w/Markings)

Pressure/Temperature Ratings - Page M-9, Graph No. 1

ACTUATOR MOUNTING

DIMENSIONS PRODUCT NUMBER 88A-200-01

SIZE

A

B

C

D

E

F

G

H

I

J

K

L

M

WT.

3”

3.00

8.00

3.68

8.80

3.88

0.50

4.75

5.95

2.840

1.420

1.250

0.725

3/8-16

60

88A-20A-01

4”

4.00

9.00

3.94

9.99

5.13

0.50

5.94

7.13

2.840

1.420

1.250

0.725

3/8-16

91

88A-20C-01

6”

6.00

15.50

7.19

13.73

7.00

1.00

7.75

9.48

4.596

2.298

2.000

1.375

3/4-10

248

“Apollo” Flow Controls

REV. 04MAY17 industrial.apollovalves.com

Customer Service (704) 841-6000

D-61

88A-200 SERIES CARBON STEEL ASME CLASS 150 FLANGED FULL PORT BALL VALVE - 8” THRU 12” FOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3. STANDARD MATERIAL LIST

VARIATIONS AVAILABLE

PART 2

Body Retainer

3

Ball

4

Stem Packing Gland Stem Seals Seats Gland Screws Gland Plate Stem Bearing Body Seal Body Joint Stud Body Joint Nut

1

5 6 7 8 9 10 11 12 13

• 88A-230 Series (Ni-Cu Ball & Stem) • 88A-240 Series (316 SS Ball & Stem)

MATERIAL

ASTM A216 WCB ASTM A216 WCB ASTM A108 Type 1215 or A216 WCB Chrome Plated ASTM A108 Type 1215 ASTM A108 Type 1215 PTFE RPTFE ASTM A193 B7 316 SS RPTFE RPTFE ASTM A193 Grade B7 ASTM A194 Grade 2H

OPTIONS AVAILABLE: (MORE INFORMATION IN SECTION J)

• Minimum quantities apply • To specify an option, replace the “01” standard suffix with the suffix of the option. • To specify multiple options, replace the “01” suffix with the desired suffixes in the numerical order shown below. NOTE: Not all suffixes can be combined together. (SUFFIX)

-01 -14-21-24-26-35-49-65-67-69-70-77-80-82-90-9P-CE-EP-KF-MG-MH-MJ-MK-TC-TD-UL-

ACTUATOR MOUNTING

OPTION

Standard Configuration Side Vented Ball (Uni-Directional). Not available with plated CS ball. UHMWPE Seats Graphite packing, spiral wound graphite body seal, RPTFE bearing (API 607, 6th edition, ISO 10497:2010) Chlorine Service. Vented. Special Cleaning. Assembled dry. (for CS, Hastelloy and Ni-Cu valves. Ball must be Hastelloy or Ni-CU) PTFE Seats and Seals No Lubrication. Assembled Dry. MPTFE Seats and Graphite Packing (Fire Safe) Cleaned for Industrial Gas - CS Valves Drilled and Tapped Purge Ports with Plugs 4” Extended Bonnet (8” Only) Live Loaded (Gear, Actuator) Multi-Seal (Super TFE) Flat Face Flanges Double Packed 4” Extended Bonnet Double Packed 4” Extended Bonnet with Monitoring Port CE Marking. See Page D-3 “Product Approvals” for availability. Garlock EVSP Stem Packing w/Spiral Wound Graphite Gasket (Fire Safe by Design) PCTFE Stem Bearing Gear Operator with Standard Handwheel Gear Operator with Standard Handwheel & Locking Device Gear Operator with Oversize Handwheel Gear Operator with Oversize Handwheel & Locking Device With Test Certificate Tested to API Spec 6D UL & CSA Listed (w/Markings)

Pressure/Temperature Ratings - Page M-9, Graph No. 1

10” & 12”

8”

DIMENSIONS PRODUCT NUMBER 88A-20E-01

SIZE

A

B

C

D

E

F

G

8”

8.00

18.00

8.88

12.83

9.18

1.00

10.22

88A-20G-01

10”

10.00

21.00

10.26

18.57

11.33

2.31

12.80

88A-20H-01

12”

12.00

24.00

12.09

20.31

13.40

2.31

14.92

REV. 04MAY17 D-62

Customer Service (704) 841-6000

www.apolloflowcontrols.com

“Apollo” Flow Controls

88A-700 SERIES CARBON STEEL ASME CLASS 300 FLANGED STD. PORT BALL VALVE - 1.5” THRU 2” FOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3. STANDARD MATERIAL LIST

VARIATIONS AVAILABLE

PART 2

Body Retainer

3

Ball

4

Stem Packing Gland Stem Seals Seats Gland Screws Gland Plate Stem Nut Lever Stem Bearing Stop Stop Screw Lock Plate Body Seal Lockwasher Grounding Spring

1

5 6 7 8 9 10 11 12 13 14 15 16 17 18

MATERIAL

ASTM A216 WCB ASTM A108 Type 1215 ASTM A108, Carbon Steel, Chrome Plated or ASTM A276, Type 316 Stainless Steel ASTM A108 Type 1215 ASTM A108 Type 1215 PTFE RPTFE ASTM A193 B7 302 & 304 SS 316 SS ASTM A366 Steel with Vinyl Grip RPTFE ASTM A108 Type 1215 SAE J429 Grade 2 ASTM A366 Steel RPTFE 302 or 304 SS SS

• 88A-740 Series (316 SS Ball & Stem) • 88A-730 Series (Ni-Cu Ball & Stem)

OPTIONS AVAILABLE: (MORE INFORMATION IN SECTION J)

• Minimum quantities apply • To specify an option, replace the “01” standard suffix with the suffix of the option. • To specify multiple options, replace the “01” suffix with the desired suffixes in the numerical order shown below. NOTE: Not all suffixes can be combined together. (SUFFIX)

-01 -04-10-14-15-21-24-26-35-38-49-65-67-69-70-73-76-77-80-82-90-9P-CE-EP-KF-TC-TD-UL-

OPTION

Standard Configuration 2.25” Stem Extension (Carbon Steel, Zinc Plated) SS Lever and Nut Side Vented Ball (Uni-Directional). Not available with plated CS ball. Wheel Handle, Steel UHMWPE Seats Graphite packing, spiral wound graphite body seal, RPTFE bearing (API 607, 5th edition, ISO 10497-5:2004) Chlorine Service. Vented. Special Cleaning. Assembled dry. (for CS, Hastelloy and Ni-Cu valves. Ball must be Hastelloy or Ni-CU) PTFE Seats and Seals PEEK Seats and Graphite Packing No Lubrication. Assembled Dry. MPTFE Seats and Graphite Packing (Fire Safe) Cleaned For Industrial Gases Drilled and Tapped Purge Ports with Plugs 4” Extended Bonnet 316 SS Spiral Wound Gaskets w/PTFE Filler Live Loaded (Lever) Live Loaded (Gear, Actuator) Multi-Seal (Super TFE) Flat Face Flanges Double Packed 4” Extended Bonnet Double Packed 4” Extended Bonnet with Monitoring Port CE Marking. See Page D-3 “Product Approvals” for availability. Garlock EVSP Stem Packing w/Spiral Wound Graphite Gasket (Fire Safe by Design) PCTFE Stem Bearing With Test Certificate Tested to API Spec 6D UL & CSA Listed (w/Markings)

Pressure/Temperature Ratings - Page M-11, Graph No. 5

ACTUATOR MOUNTING

DIMENSIONS PRODUCT NUMBER 88A-707-01 88A-708-01

SIZE

A

B

C

D

E

F

G

H

I

J

K

L

M

N

WT.

1.5”

1.25

7.50

4.50

4.85

6.53

0.47

1.85

2.38

1.392

0.696

0.500

0.287

1/4-20

1.50

16

2”

1.50

8.50

5.19

4.62

6.65

0.72

2.41

3.09

1.949

0.974

0.625

0.412

5/16-18

2.00

24

“Apollo” Flow Controls

REV. 04MAY17 industrial.apollovalves.com

Customer Service (704) 841-6000

D-63

88A-700 SERIES CARBON STEEL ASME CLASS 300 FLANGED STD. PORT BALL VALVE - 2.5” THRU 3” FOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3. STANDARD MATERIAL LIST

VARIATIONS AVAILABLE

PART 2

Body Retainer

3

Ball

4

Stem Packing Gland Stem Seals Seats Gland Screws Gland Plate Stem Nut Lever Stem Bearing Stop Stop Screw Lock Plate Body Seal Grounding Spring Body Joint Stud Body Joint Nut Lockwasher

1

5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20

• 88A-740 Series (316 SS Ball & Stem) • 88A-730 Series (Ni-Cu Ball & Stem)

MATERIAL

ASTM A216 WCB ASTM A216 WCB ASTM A108 Type 1215 or A216 WCB Chrome Plated ASTM A108 Type 1215 ASTM A108 Type 1215 PTFE RPTFE ASTM A193 B7 302 or 304 SS ASTM A194 Grade 8 ASTM A366 Steel with Vinyl Grip RPTFE ASTM A108 Type 1215 SAE J429 Grade 2 ASTM A366 Steel RPTFE SS ASTM A193 Grade B7 ASTM A194 Grade 2H 302 or 304 SS

OPTIONS AVAILABLE: (MORE INFORMATION IN SECTION J)

• Minimum quantities apply • To specify an option, replace the “01” standard suffix with the suffix of the option. • To specify multiple options, replace the “01” suffix with the desired suffixes in the numerical order shown below. NOTE: Not all suffixes can be combined together.

(SUFFIX) -01 -04-10-14-15-21-24-26-35-38-49-59-65-67-69-70-73-76-77-80-82-90-9P-CE-EP-KF-MG-MH-MJ-MK-TC-TD-UL-

ACTUATOR MOUNTING

OPTION Standard Configuration 2.25” Stem Extension (Carbon Steel, Zinc Plated) SS Lever and Nut Side Vented Ball (Uni-Directional). Not available with plated CS ball. Wheel Handle, Steel UHMWPE Seats Graphite packing, spiral wound graphite body seal, RPTFE bearing (API 607, 6th edition, ISO 10497:2010) Chlorine Service. Vented. Special Cleaning. Assembled dry. (for CS, Hastelloy and Ni-Cu valves. Ball must be Hastelloy or Ni-CU) PTFE Seats and Seals PEEK Seats and Graphite Packing No Lubrication. Assembled Dry. SS External Trim MPTFE Seats and Graphite Packing (Fire Safe) Cleaned For Industrial Gases Drilled and Tapped Purge Port with Plug 4” Extended Bonnet 316 SS Spiral Wound Gaskets w/PTFE Filler Live Loaded (Lever) Live Loaded (Gear, Actuator) Multi-Seal (Super TFE) Flat Face Flanges Double Packed 4” Extended Bonnet Double Packed 4” Extended Bonnet with Monitoring Port CE Marking. See Page D-3 “Product Approvals” for availability. Garlock EVSP Stem Packing w/Spiral Wound Graphite Gasket (Fire Safe by Design) PCTFE Stem Bearing Gear Operator with Standard Handwheel Gear Operator with Standard Handwheel & Locking Device Gear Operator with Oversize Handwheel Gear Operator with Oversize Handwheel & Locking Device With Test Certificate Tested to API Spec 6D UL & CSA Listed (w/Markings)

Pressure/Temperature Ratings - Page M-11, Graph No. 5

DIMENSIONS PRODUCT NUMBER 88A-709-01 88A-700-01

SIZE

A

B

2.5”

2.00

9.50

3”

2.50

11.12

C

D

E

F

G

H

I

J

K

L

M

4.75

5.61

8.41

5.56

6.24

8.41

0.80

3.31

4.08

1.949

0.974

0.750

0.477

0.80

3.94

4.71

1.949

0.974

0.750

0.477

REV. 04MAY17 D-64

Customer Service (704) 841-6000

www.apolloflowcontrols.com

N

WT.

5/16-18

2.50

39

5/16-18

3.00

55

“Apollo” Flow Controls

88A-700 SERIES CARBON STEEL ASME CLASS 300 FLANGED STD. PORT BALL VALVE - 4” THRU 8” FOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3. STANDARD MATERIAL LIST

VARIATIONS AVAILABLE

PART 2

Body Retainer

3

Ball

4

Stem Packing Gland Stem Seals Seats Gland Screws Gland Plate Adapter Screw Handle Adapter Stem Bearing Stop Stop Screw Lock Plate Body Seal Grounding Spring Body Joint Stud Body Joint Nut Adapter Screw Pipe Handle

1

5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21

• 88A-740 Series (316 SS Ball & Stem) • 88A-730 Series (Ni-Cu Ball & Stem)

MATERIAL

ASTM A216 WCB ASTM A216 WCB ASTM A108 Type 1215 or A216 WCB Chrome Plated ASTM A108 Type 1215 ASTM A108 Type 1215 PTFE RPTFE ASTM A193 B7 316 SS 316 SS ASTM A366 Steel with Vinyl Grip RPTFE ASTM A108 Type 1215 SAE J429 Grade 2 ASTM A366 Steel RPTFE SS ASTM A193 Grade B7 ASTM A194 Grade 2H 316 SS Galvanized Steel (not shown)

OPTIONS AVAILABLE: (MORE INFORMATION IN SECTION J)

• Minimum quantities apply • To specify an option, replace the “01” standard suffix with the suffix of the option. • To specify multiple options, replace the “01” suffix with the desired suffixes in the numerical order shown below. NOTE: Not all suffixes can be combined together. (SUFFIX)

-01 -14-21-24-26-35-49-59-65-67-69-70-73-76-77-80-82-90-9P-CE-EP-KF-MG-MH-MJ-MK-TC-TD-UL-

OPTION

Standard Configuration Side Vented Ball (Uni-Directional). Not available with plated CS ball. UHMWPE Seats Fire Safe - graphite packing & seals (API 607, 5th edition, ISO 104975:2004) 4” & 6” (API 607, 6th edition, ISO 10497:2010) 8” Chlorine Service. Vented. Special Cleaning. Assembled dry. (for CS, Hastelloy and Ni-Cu valves. Ball must be Hastelloy or Ni-CU) PTFE Seats and Seals No Lubrication. Assembled Dry. SS External Trim MPTFE Seats and Graphite Packing (Fire Safe) Cleaned For Industrial Gases Drilled and Tapped Purge Ports with Plugs 4” Extended Bonnet 316 SS Spiral Wound Gaskets w/PTFE Filler Live Loaded (Lever) Live Loaded (Gear, Actuator) Multi-Seal (Super TFE) Flat Face Flanges Double Packed 4” Extended Bonnet Double Packed 4” Extended Bonnet with Monitoring Port CE Marking. See Page D-3 “Product Approvals” for availability. Garlock EVSP Stem Packing w/Spiral Wound Graphite Gasket (Fire Safe by Design) PCTFE Stem Bearing Gear Operator with Standard Handwheel Gear Operator with Standard Handwheel & Locking Device Gear Operator with Oversize Handwheel Gear Operator with Oversize Handwheel & Locking Device With Test Certificate Tested to API Spec 6D UL & CSA Listed (w/Markings)

Pressure/Temperature Ratings - Page M-11, Graph No. 5

ACTUATOR MOUNTING

DIMENSIONS PRODUCT NUMBER 88A-70A-01

SIZE

A

B

C

D

E

F

G

H

I

J

K

L

M

N

WT.

4”

3.00

12.00

5.68

8.80

4.06

0.50

4.75

5.95

2.840

1.420

1.250

0.725

3/8-16

4.00

95

88A-70C-01

6”

4.00

15.88

7.38

9.99

5.25

0.50

5.94

7.13

2.840

1.420

1.250

0.725

3/8-16

6.00

187

88A-70E-01

8”

6.00

19.75

9.00

13.73

7.30

1.00

7.75

9.48

4.596

2.298

2.000

1.375

3/4-10

8.00

400

“Apollo” Flow Controls

REV. 04MAY17 industrial.apollovalves.com

Customer Service (704) 841-6000

D-65

88A-700 SERIES CARBON STEEL ASME CLASS 300 FLANGED STD. PORT BALL VALVE - 10” FOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3. STANDARD MATERIAL LIST

VARIATIONS AVAILABLE

PART 2

Body Retainer

3

Ball

4

Stem Packing Gland Stem Seals Seats Gland Screws Gland Plate Stem Bearing Body Seal Body Joint Stud Body Joint Nut

1

5 6 7 8 9 10 11 12 13

• 88A-730 Series (Ni-Cu Ball & Stem) • 88A-740 Series (316 SS Ball & Stem)

MATERIAL

ASTM A216 WCB ASTM A216 WCB ASTM A108 Type 1215 or A216 WCB Chrome Plated ASTM A108 Type 1215 ASTM A108 Type 1215 PTFE RPTFE ASTM A193 B7 316 SS RPTFE RPTFE ASTM A193 Grade B7 ASTM A194 Grade 2H

OPTIONS AVAILABLE: (MORE INFORMATION IN SECTION J)

• Minimum quantities apply • To specify an option, replace the “01” standard suffix with the suffix of the option. • To specify multiple options, replace the “01” suffix with the desired suffixes in the numerical order shown below. NOTE: Not all suffixes can be combined together. (SUFFIX)

-01 -14-21-24-26-35-49-65-67-69-70-77-80-82-90-9P-CE-EP-KF-MG-MH-MJ-MK-TC-TD-UL-

OPTION

Standard Configuration Side Vented Ball (Uni-Directional). Not available with plated CS ball. UHMWPE Seats Graphite packing, spiral wound graphite body seal, RPTFE bearing (API 607, 5th edition, ISO 10497-5:2004) Chlorine Service. Vented. Special Cleaning. Assembled dry. (for CS, Hastelloy and Ni-Cu valves. Ball must be Hastelloy or Ni-CU) PTFE Seats and Seals No Lubrication. Assembled Dry. MPTFE Seats and Graphite Packing (Fire Safe) Cleaned For Industrial Gases Drilled and Tapped Purge Port with Plugs 4” Extended Bonnet Live Loaded (Gear, Actuator) Multi-Seal (Super TFE) Flat Face Flanges Double Packed 4” Extended Bonnet Double Packed 4” Extended Bonnet with Monitoring Port CE Marking. See Page D-3 “Product Approvals” for availability. Garlock EVSP Stem Packing w/Spiral Wound Graphite Gasket (Fire Safe by Design) PCTFE Stem Bearing Gear Operator with Standard Handwheel Gear Operator with Standard Handwheel & Locking Device Gear Operator with Oversize Handwheel Gear Operator with Oversize Handwheel & Locking Device With Test Certificate Tested to API Spec 6D UL & CSA Listed (w/Markings)

Pressure/Temperature Ratings - Page M-1, Graph No. 5

ACTUATOR MOUNTING

DIMENSIONS PRODUCT NUMBER 88A-70G-01

SIZE

A

B

C

D

E

F

G

H

I

J

K

L

M

10”

8.00

22.38

10.69

12.83

9.56

1.00

10.22

4.596

2.298

2.000

1.375

3/4-10

10.00

REV. 04MAY17 D-66

Customer Service (704) 841-6000

www.apolloflowcontrols.com

“Apollo” Flow Controls

88A-900 SERIES CARBON STEEL ASME CLASS 300 FLANGED FULL PORT BALL VALVE - 1/2” THRU 1” FOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3. STANDARD MATERIAL LIST

VARIATIONS AVAILABLE

PART (1/2”& 3/4” VALVES) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

Body Retainer Ball Stem Packing Gland Stem Seals Seats Stem Nut Lever Stem Bearing Stop Body Seal Lock Washer Grounding Spring Grounding Spring

ASTM A216 WCB ASTM A108 Type 1215 ASTM A108 Type 1215 ASTM A108 Type 1215 ASTM A108 Type 1215 PTFE RPTFE 300 Series Stainless Steel 300 Series Stainless Steel w/Vinyl Grip RPTFE 300 Series Stainless Steel RPTFE 300 Series Stainless Steel ASTM A313 Stainless Steel ASTM A313 Stainless Steel

PART (1” VALVES) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18

• 88A-940 Series (316 SS Ball & Stem) • 88A-930 Series (Ni-Cu Ball & Stem)

MATERIAL

OPTIONS AVAILABLE: (MORE INFORMATION IN SECTION J)

• Minimum quantities apply • To specify an option, replace the “01” standard suffix with the suffix of the option. • To specify multiple options, replace the “01” suffix with the desired suffixes in the numerical order shown below. NOTE: Not all suffixes can be combined together. (SUFFIX)

-01 -04-10-14-15-21-24-

MATERIAL

Body Retainer Ball Stem Packing Gland Stem Seals Seats Gland Screws Gland Plate Stem Nut Lever Stem Bearing Stop Stop Screw Lock Plate Body Seal Lockwasher Grounding Spring

-26-

ASTM A216 WCB ASTM A108 Type 1215 ASTM A108 Type 1215 Chrome Plated ASTM A108 Type 1215 ASTM A108 Type 1215 PTFE RPTFE ASTM A193 B7 302 or 304 SS 316 SS ASTM A366 Steel with Vinyl Grip RPTFE ASTM A108 Type 1215 SAE J429 Grade 2 ASTM A366 Steel RPTFE 302 or 304 SS SS

-35-38-49-65-67-69-70-73-76-77-80-82-90-9P-CE-EP-KF-TC-TD-UL-

Pressure/Temperature Ratings - Page M-11, Graph No. 5

1/2” & 3/4” VALVES

OPTION

Standard Configuration 2.25” Stem Extension (Carbon Steel, Zinc Plated) SS Lever and Nut Side Vented Ball (Uni-Directional). Not available with plated CS ball. Wheel Handle, Steel UHMWPE Seats Graphite packing, spiral wound graphite body seal, RPTFE bearing (API 607, 5th edition, ISO 10497-5:2004) Chlorine Service. Vented. Special Cleaning. Assembled dry. (for CS, Hastelloy and Ni-Cu valves. Ball must be Hastelloy or Ni-CU) PTFE Seats and Seals PEEK Seats and Graphite Packing No Lubrication. Assembled Dry. MPTFE Seats and Graphite Packing (Fire Safe) Cleaned For Industrial Gases Drilled and Tapped Purge Port with Plug 4” Extended Bonnet 316 SS Spiral Wound Gaskets w/PTFE Filler Live Loaded (Lever) Live Loaded (Gear, Actuator) Multi-Seal (Super TFE) Flat Face Flanges Double Packed 4” Extended Bonnet Double Packed 4” Extended Bonnet with Monitoring Port CE Marking. See Page D-3 “Product Approvals” for availability. Garlock EVSP Stem Packing w/Spiral Wound Graphite Gasket (Fire Safe by Design) PCTFE Stem Bearing With Test Certificate Tested to API Spec 6D UL & CSA Listed (w/Markings)

1” VALVE

DIMENSIONS PRODUCT NUMBER 88A-903-01

SIZE

A

B

C

D

E

F

G

H

I

J

K

L

M

WT.

1/2”

0.50

5.50

3.31

3.31

5.11

0.30

1.09

1.38

1.000

0.500

0.375

0.245

10-24

7.0

88A-904-01

3/4”

0.75

6.00

3.56

3.89

5.53

0.36

1.65

1.99

1.392

0.696

0.500

0.287

1/4-20

9.0

88A-905-01

1”

1.00

6.50

3.82

4.62

6.53

0.47

1.62

2.15

1.392

0.696

0.500

0.287

1/4-20

10.5

“Apollo” Flow Controls

REV. 04MAY17 industrial.apollovalves.com

Customer Service (704) 841-6000

D-67

88A-900 SERIES CARBON STEEL ASME CLASS 300 FLANGED FULL PORT BALL VALVE - 1.5” THRU 2.5” FOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3. STANDARD MATERIAL LIST

VARIATIONS AVAILABLE

PART 2

Body Retainer

3

Ball

4

Stem Packing Gland Stem Seals Seats Gland Screws Gland Plate Stem Nut Lever Stem Bearing Stop Stop Screw Lock Plate Body Seal Grounding Spring Body Joint Stud Body Joint Nut Lockwasher

1

5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20

• 88A-940 Series (316 SS Ball & Stem) • 88A-930 Series (Ni-Cu Ball & Stem)

MATERIAL

ASTM A216 WCB ASTM A216 WCB ASTM A108 Type 1215 or ASTM A216 WCB Chrome Plated ASTM A108 Type 1215 ASTM A108 Type 1215 PTFE RPTFE ASTM A193 B7 302 & 304 SS ASTM A194 Grade 8l ASTM A366 Steel with Vinyl Grip RPTFE ASTM A108 Type 1215 SAE J429 Grade 2 ASTM A366 Steel RPTFE SS ASTM A193 Grade B7 ASTM A194 Grade 2H 302 or ­304 SS

OPTIONS AVAILABLE: (MORE INFORMATION IN SECTION J)

• Minimum quantities apply • To specify an option, replace the “01” standard suffix with the suffix of the option. • To specify multiple options, replace the “01” suffix with the desired suffixes in the numerical order shown below. NOTE: Not all suffixes can be combined together. (SUFFIX)

-01 -04-14-15-21-24-26-35-38-49-59-65-67-69-70-73-76-77-80-82-90-9P-CE-EP-KF-MG-MH-MJ-MK-TC-TD-UL-

ACTUATOR MOUNTING

OPTION

Standard Configuration 2.25” Stem Extension (Carbon Steel, Zinc Plated) Side Vented Ball (Uni-Directional). Not available with plated CS ball. Wheel Handle, Steel UHMWPE Seats Fire Safe - graphite packing & seals (API 607, 5th edition, ISO 104975:2004) 1.5” & 2” (API 607, 6th edition, ISO 10497:2010) 2.5” Chlorine Service. Vented. Special Cleaning. Assembled dry. (for CS, Hastelloy and Ni-Cu valves. Ball must be Hastelloy or Ni-CU) PTFE Seats and Seals PEEK Seats and Graphite Packing No Lubrication. Assembled Dry. SS External Trim MPTFE Seats and Graphite Packing (Fire Safe) Cleaned For Industrial Gases Drilled and Tapped Purge Ports with Plugs 4” Extended Bonnet 316 SS Spiral Wound Gaskets w/PTFE Filler Live Loaded (Lever) Live Loaded (Gear, Actuator) Multi-Seal (Super TFE) Flat Face Flanges Double Packed 4” Extended Bonnet Double Packed 4” Extended Bonnet with Monitoring Port CE Marking. See Page D-3 “Product Approvals” for availability. Garlock EVSP Stem Packing w/Spiral Wound Graphite Gasket (Fire Safe by Design) PCTFE Stem Bearing Gear Operator with Standard Handwheel Gear Operator with Standard Handwheel & Locking Device Gear Operator with Oversize Handwheel Gear Operator with Oversize Handwheel & Locking Device With Test Certificate Tested to API Spec 6D UL & CSA Listed (w/Markings)

Pressure/Temperature Ratings - Page M-11, Graph No. 5

DIMENSIONS PRODUCT NUMBER 88A-907-01

SIZE

A

B

C

D

E

F

G

H

I

K

L

M

WT.

1.5”

1.50

7.50

3.50

4.62

6.65

0.72

2.41

3.09

1.949

0.974

0.625

0.412

5/16-18

21

88A-908-01

2”

2.00

8.50

4.00

5.61

8.41

0.80

3.31

4.08

1.949

0.974

0.750

0.477

5/16-18

37

88A-909-01

2.5”

2.50

9.50

4.44

6.24

8.41

0.80

3.94

4.71

1.949

0.974

0.750

0.477

5/16-18

57

REV. 04MAY17 D-68

J

Customer Service (704) 841-6000

www.apolloflowcontrols.com

“Apollo” Flow Controls

88A-900 SERIES CARBON STEEL ASME CLASS 300 FLANGED FULL PORT BALL VALVE - 3” THRU 6” FOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3. STANDARD MATERIAL LIST

VARIATIONS AVAILABLE

PART 2

Body Retainer

3

Ball

4

Stem Packing Gland Stem Seals Seats Gland Screws Gland Plate Adapter Screw Handle Adapter Stem Bearing Stop Stop Screw Lock Plate Body Seal Grounding Spring Body Joint Stud Body Joint Nut Pipe Handle

1

5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20

• 88A-940 Series (316 SS Ball & Stem) • 88A-930 Series (Ni-Cu Ball & Stem)

MATERIAL

ASTM A216 WCB ASTM A216 WCB ASTM A108 Type 1215 or ASTM A216 WCB Chrome Plated ASTM A108 Type 1215 ASTM A108 Type 1215 PTFE RPTFE ASTM A193 B7 316 SS 316 SS ASTM A366 Steel with Vinyl Grip RPTFE ASTM A108 Type 1215 SAE J429 Grade 2 ASTM A366 Steel RPTFE SS ASTM A193 Grade B7 ASTM A194 Grade 2H Galvanized Steel (not shown)

OPTIONS AVAILABLE: (MORE INFORMATION IN SECTION J)

• Minimum quantities apply • To specify an option, replace the “01” standard suffix with the suffix of the option. • To specify multiple options, replace the “01” suffix with the desired suffixes in the numerical order shown below. NOTE: Not all suffixes can be combined together. (SUFFIX)

-01 -14-21-24-26-35-38-49-59-65-67-69-70-73-76-77-80-82-90-9P-CE-EP-KF-MG-MH-MJ-MK-TC-TD-UL-

OPTION

Standard Configuration Side Vented Ball (Uni-Directional). Not available with plated CS ball. UHMWPE Seats Graphite packing, spiral wound graphite body seal, RPTFE bearing (API 607, 6th edition, ISO 10497:2010) Chlorine Service. Vented. Special Cleaning. Assembled dry. (for CS, Hastelloy and Ni-Cu valves. Ball must be Hastelloy or Ni-CU) PTFE Seats and Seals PEEK Seats and Graphite Packing No Lubrication. Assembled Dry. SS External Trim MPTFE Seats and Graphite Packing (Fire Safe) Cleaned For Industrial Gases Drilled and Tapped Purge Ports with Plugs 4” Extended Bonnet 316 SS Spiral Wound Gaskets w/PTFE Filler Live Loaded (Lever) Live Loaded (Gear, Actuator) Multi-Seal (Super TFE) Flat Face Flanges Double Packed 4” Extended Bonnet Double Packed 4” Extended Bonnet with Monitoring Port CE Marking. See Page D-3 “Product Approvals” for availability. Garlock EVSP Stem Packing w/Spiral Wound Graphite Gasket (Fire Safe by Design) PCTFE Stem Bearing Gear Operator with Standard Handwheel Gear Operator with Standard Handwheel & Locking Device Gear Operator with Oversize Handwheel Gear Operator with Oversize Handwheel & Locking Device With Test Certificate Tested to API Spec 6D UL & CSA Listed (w/Markings)

Pressure/Temperature Ratings - Page M-11, Graph No. 5

ACTUATOR MOUNTING

DIMENSIONS PRODUCT NUMBER 88A-900-01

SIZE

A

B

C

D

E

F

G

H

I

J

K

L

M

WT.

3”

3.00

11.12

5.24

8.80

4.06

0.50

4.75

5.95

2.840

1.420

1.250

0.725

3/8-16

78

88A-90A-01

4”

4.00

12.00

5.44

9.99

5.25

0.50

5.94

7.13

2.840

1.420

1.250

0.725

3/8-16

133

88A-90C-01

6”

6.00

15.88

6.82

13.73

7.30

1.00

7.75

9.48

4.596

2.296

2.000

1.375

3/4-10

329

“Apollo” Flow Controls

REV. 04MAY17 industrial.apollovalves.com

Customer Service (704) 841-6000

D-69

88A-900 SERIES CARBON STEEL ASME CLASS 300 FLANGED FULL PORT BALL VALVE - 8” THRU 12” FOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3. STANDARD MATERIAL LIST

VARIATIONS AVAILABLE

PART 1 2 3 4 5 6 7 8 9 10 11 12 13

• 88A-930 Series (Ni-Cu Ball & Stem) • 88A-940 Series (316 SS Ball & Stem)

MATERIAL

Body Retainer Ball Stem Packing Gland Stem Seals Seats Gland Screws Gland Plate Stem Bearing Body Seal Body Joint Stud Body Joint Nut

ASTM A216 WCB ASTM A216 WCB ASTM A108 Type 1215 or A216 WCB ASTM A108 Type 1215 ASTM A108 Type 1215 PTFE RPTFE ASTM A193 B7 316 SS RPTFE RPTFE ASTM A193 Grade B7 ASTM A194 Grade 2H

OPTIONS AVAILABLE: (MORE INFORMATION IN SECTION J)

• Minimum quantities apply • To specify an option, replace the “01” standard suffix with the suffix of the option. • To specify multiple options, replace the “01” suffix with the desired suffixes in the numerical order shown below. NOTE: Not all suffixes can be combined together. (SUFFIX)

-01 -14-21-24-26-35-49-65-67-69-70-77-80-82-90-9P-CE-EP-KF-MG-MH-MJ-MK-TC-TD-UL-

ACTUATOR MOUNTING

OPTION

Standard Configuration Side Vented Ball (Uni-Directional). Not available with plated CS ball. UHMWPE Seats Graphite packing, spiral wound graphite body seal, RPTFE bearing (API 607, 6th edition, ISO 10497:2010) Chlorine Service. Vented. Special Cleaning. Assembled dry. (for CS, Hastelloy and Ni-Cu valves. Ball must be Hastelloy or Ni-CU) PTFE Seats and Seals No Lubrication. Assembled Dry. MPTFE Seats and Graphite Packing (Fire Safe) Cleaned for Industrial Gas Drilled and Tapped Purge Ports with Plugs 4” Extended Bonnet (8” Only) Live Loaded (Gear, Actuator) Multi-Seal (Super TFE) Flat Face Flanges Double Packed 4” Extended Bonnet Double Packed 4” Extended Bonnet with Monitoring Port CE Marking. See Page D-3 “Product Approvals” for availability. Garlock EVSP Stem Packing w/Spiral Wound Graphite Gasket (Fire Safe by Design) PCTFE Stem Bearing Gear Operator with Standard Handwheel Gear Operator with Standard Handwheel & Locking Device Gear Operator with Oversize Handwheel Gear Operator with Oversize Handwheel & Locking Device With Test Certificate Tested to API Spec 6D UL & CSA Listed (w/Markings)

Pressure/Temperature Ratings - Page M-11, Graph No. 5

8”

10” & 12” DIMENSIONS PRODUCT NUMBER 88A-90E-01

SIZE

A

B

C

D

E

F

G

8”

8.00

19.75

9.38

12.83

9.56

1.00

10.22

88A-90G-01

10”

10.00

22.38

10.95

18.57

11.33

2.31

12.80

88A-90H-01

12”

12.00

25.50

12.84

20.31

13.40

2.31

14.92

REV. 04MAY17 D-70

Customer Service (704) 841-6000

www.apolloflowcontrols.com

“Apollo” Flow Controls

88B-100 SERIES CARBON STEEL ASME CLASS 150 FLANGED STD. PORT BALL VALVE - 3” FOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3. STANDARD MATERIAL LIST

VARIATIONS AVAILABLE

PART 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18

MATERIAL

Body Retainer Ball Stem Packing Gland Stem Seals Seats Gland Screws Gland Plate Stem Nut Lever Stem Bearing Stop Stop Screw Lock Plate Body Seal Grounding Spring Lockwasher

ASTM A216-WCB ASTM A108 Type 1215 ASTM A108 Type 1215 Chrome Plated ASTM A108 Type 1215 Chrome Plated ASTM A108 Type 1215 PTFE RPTFE ASTM A193 B7 316 SS 18-8 SS 316 SS with Vinyl Grip RPTFE ASTM A108 Type 1215 SAE J429 Grade 2 ASTM A366 Steel RPTFE SS 302 or 304 SS

• 88B-130 Series (Ni-Cu Ball & Stem) • 88B-140 Series (316 SS Ball & Stem)

OPTIONS AVAILABLE: (MORE INFORMATION IN SECTION J)

• Minimum quantities apply • To specify an option, replace the “01” standard suffix with the suffix of the option. • To specify multiple options, replace the “01” suffix with the desired suffixes in the numerical order shown below. NOTE: Not all suffixes can be combined together. (SUFFIX)

-01 -04-14-21-24-26-35-38-49-65-67-69-70-76-77-80-82-90-9P-CE-EP-KF-MG-MH-MJ-MK-TC-TD-UL-

OPTION

Standard Configuration 2.25” Stem Extension (Carbon Steel, Zinc Plated) Side Vented Ball (Uni-Directional). Not available with plated CS ball. UHMWPE Seats Graphite packing, spiral wound graphite body seal, RPTFE bearing (API 607, 6th edition, ISO 10497:2010) Chlorine Service. Vented. Special Cleaning. Assembled dry. (for CS, Hastelloy and Ni-Cu valves. Ball must be Hastelloy or Ni-CU) PTFE Seats and Seals PEEK Seats and Graphite Packing (3” Only) No Lubrication. Assembled Dry. MPTFE Seats and Graphite Packing (Fire Safe) Cleaned for Industrial Gases Drilled and Tapped Purge Ports with Plugs 4” Extended Bonnet Live Loaded (Lever) Live Loaded (Gear, Actuator) Multi-Seal (Super TFE) Flat Face Flanges Double Packed 4” Extended Bonnet Double Packed 4” Extended Bonnet with Monitoring Port CE Marking. See Page D-3 “Product Approvals” for availability. Garlock EVSP Stem Packing w/Spiral Wound Graphite Gasket (Fire Safe by Design) PCTFE Stem Bearing Gear Operator with Standard Handwheel Gear Operator with Standard Handwheel & Locking Device Gear Operator with Oversize Handwheel Gear Operator with Oversize Handwheel & Locking Device With Test Certificate Tested to API Spec 6D UL & CSA Listed (w/Markings)

Pressure/Temperature Ratings - Page M-9, Graph No. 1

ACTUATOR MOUNTING

DIMENSIONS PRODUCT NUMBER 88B-100-01

SIZE

A

B

C

D

E

F

G

H

I

J

K

L

M

N

WT.

3”

2.50

8.00

4.00

6.23

8.40

3.93

4.70

1.949

0.974

0.750

0.477

5/16-18

3.00

0.77

43

“Apollo” Flow Controls

REV. 04MAY17 industrial.apollovalves.com

Customer Service (704) 841-6000

D-71

88B-100 SERIES CARBON STEEL ASME CLASS 150 FLANGED STD. PORT BALL VALVE - 4” THRU 10” SHORT PATTERN FOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3. STANDARD MATERIAL LIST

VARIATIONS AVAILABLE

PART 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20

MATERIAL

Body Retainer Ball Stem Packing Gland Stem Seals Seats Gland Screws Gland Plate Adapter Screw Handle Adapter Stem Bearing Stop Stop Screw Lock Plate Body Seal Lockwasher Grounding Spring Adapter Screw Pipe Handle

ASTM A216-WCB ASTM A108 Type 1215 ASTM A108 Type 1215 (Chrome Plate) ASTM A108 Type 1215 (Chrome Plate) ASTM A108 Type 1215 PTFE RPTFE ASTM A193 B7 316 SS 18-8 SS 316 SS RPTFE ASTM A108 Type 1215 SAE J429 Grade 2 ASTM A366 Stainless Steel RPTFE 302 or 304 SS SS 18-8 SS Galvanized Steel (not shown)

• 88B-130 Series (Ni-Cu Ball & Stem) • 88B-140 Series (316 SS Ball & Stem)

OPTIONS AVAILABLE: (MORE INFORMATION IN SECTION J)

• Minimum quantities apply • To specify an option, replace the “01” standard suffix with the suffix of the option. • To specify multiple options, replace the “01” suffix with the desired suffixes in the numerical order shown below. NOTE: Not all suffixes can be combined together. (SUFFIX)

-01 -14-21-24-26-35-38-49-65-67-69-70-76-77-80-82-90-9P-CE-

Pressure/Temperature Ratings - Page M-9, Graph No. 1

-EP-KF-MG-MH-MJ-MK-TC-TD-UL-

OPTION

Standard Configuration Side Vented Ball (Uni-Directional). Not available with plated CS ball. UHMWPE Seats Graphite packing, spiral wound graphite body seal, RPTFE bearing (API 607, 6th edition, ISO 10497:2010) Chlorine Service. Vented. Special Cleaning. Assembled dry. (for CS, Hastelloy and Ni-Cu valves. Ball must be Hastelloy or Ni-CU) PTFE Seats and Seals PEEK Seats and Graphite Packing No Lubrication. Assembled Dry. MPTFE Seats and Graphite Packing (Fire Safe) Cleaned for Industrial Gases Drilled and Tapped Purge Ports with Plugs 4” Extended Bonnet Live Loaded (Lever) Live Loaded (Gear, Actuator) Multi-Seal (Super TFE) Flat Face Flanges Double Packed 4” Extended Bonnet Double Packed 4” Extended Bonnet with Monitoring Port CE Marking. See Page D-3 “Product Approvals” for availability. Garlock EVSP Stem Packing w/Spiral Wound Graphite Gasket (Fire Safe by Design) PCTFE Stem Bearing Gear Operator with Standard Handwheel Gear Operator with Standard Handwheel & Locking Device Gear Operator with Oversize Handwheel Gear Operator with Oversize Handwheel & Locking Device With Test Certificate Tested to API Spec 6D UL & CSA Listed (w/Markings)

ACTUATOR MOUNTING

DIMENSIONS PRODUCT NUMBER 88B-10A-01

SIZE

A

B

C

D

E

F

G

H

I

J

K

L

M

4”

3.00

9.00

4.18

8.80

0.50

4.75

5.95

2.840

1.420

1.250

0.725

3/8-16

4.00

72

6”

4.00

10.50

5.25

9.99

0.50

5.94

7.13

2.840

1.420

1.250

0.725

3/8-16

6.00

110

88B-10E-01

8”

6.00

11.50

5.75

13.61

1.00

7.63

9.36

4.596

2.298

2.000

1.375

3/4-10

8.00

210

88B-10G-01

10”

8.00

13.00

6.50

N/A

1.00

9.50

11.23

4.596

2.298

2.000

1.375

3/4-10

10.0

350

88B-10C-01

REV. 04MAY17 D-72

Customer Service (704) 841-6000

www.apolloflowcontrols.com

WT.

“Apollo” Flow Controls

88L-140 SERIES LOW TEMP. CARBON STEEL ASME CLASS 150 FLANGED STD. PORT BALL VALVE - 1.5” THRU 2” FOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3 AND RATED TO -50°F (-46°C). STANDARD MATERIAL LIST

VARIATIONS AVAILABLE

PART 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18

• 88L-130 Series (Ni-Cu Ball & Stem)

MATERIAL

Body Retainer Ball Stem Packing Gland Stem Seals Seats Gland Screws Gland Plate Stem Nut Lever Stem Bearing Stop Stop Screw Lock Plate Body Seal Lockwasher Grounding Spring

ASTM A352-LCC ASTM A352-LCC ASTM A276-316 ASTM A276-316 ASTM A108 Type 1215 PTFE RPTFE ASTM A193 B7 302 or 304 SS 316 SS ASTM A366 Steel with Vinyl Grip RPTFE ASTM A108 Type 1215 SAE J429 Grade 2 ASTM A366 Steel RPTFE 302 or 304 SS SS

OPTIONS AVAILABLE: (MORE INFORMATION IN SECTION J)

• Minimum quantities apply • To specify an option, replace the “01” standard suffix with the suffix of the option. • To specify multiple options, replace the “01” suffix with the desired suffixes in the numerical order shown below. NOTE: Not all suffixes can be combined together. (SUFFIX)

-01 -04-10-14-15-21-24-26-35-38-49-65-67-69-70-73-76-77-80-82-90-9P-CE-EP-KF-TC-TD-UL-

OPTION

Standard Configuration 2.25” Stem Extension (Carbon Steel, Zinc Plated) SS Lever and Nut Side Vented Ball (Uni-Directional). Not available with plated CS ball. Wheel Handle, Steel UHMWPE Seats Graphite packing, spiral wound graphite body seal, RPTFE bearing (API 607, 6th edition, ISO 10497:2010) Chlorine Service. Vented. Special Cleaning. Assembled dry. (for CS, Hastelloy and Ni-Cu valves. Ball must be Hastelloy or Ni-CU) PTFE Seats and Seals PEEK Seats and Graphite Packing No Lubrication. Assembled Dry. MPTFE Seats and Graphite Packing (Fire Safe) Cleaned For Industrial Gases Drilled and Tapped Purge Port with Plug 4” Extended Bonnet 316 SS Spiral Wound Gaskets w/PTFE Filler Live Loaded (Lever) Live Loaded (Gear, Actuator) Multi-Seal (Super TFE) Flat Face Flanges Double Packed 4” Extended Bonnet Double Packed 4” Extended Bonnet with Monitoring Port CE Marking. See Page D-3 “Product Approvals” for availability. Garlock EVSP Stem Packing w/Spiral Wound Graphite Gasket (Fire Safe by Design) PCTFE Stem Bearing With Test Certificate Tested to API Spec 6D UL Listed

Pressure/Temperature Ratings - Page M-23, Graph No. 31

ACTUATOR MOUNTING

DIMENSIONS PRODUCT NUMBER 88L-147-01A 88L-148-01

SIZE

A

B

C

D

E

F

G

H

I

J

K

L

M

N

1.5”

1.25

6.50

3.50

4.85

6.53

0.47

1.85

2.38

1.392

0.696

0.500

0.287

1/4-20

1.50

9

2”

1.50

7.00

3.69

4.62

6.65

0.72

2.41

3.09

1.949

0.974

0.625

0.412

5/16-18

2.00

18

“Apollo” Flow Controls

WT.

REV. 04MAY17 industrial.apollovalves.com

Customer Service (704) 841-6000

D-73

88L-140 SERIES LOW TEMP. CARBON STEEL ASME CLASS 150 FLANGED STD. PORT BALL VALVE - 2.5” THRU 3” FOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3 AND RATED TO -50°F (-46°C). STANDARD MATERIAL LIST

VARIATIONS AVAILABLE

PART 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20

• 88L-140 Series (316 SS Ball & Stem)

MATERIAL

Body Retainer Ball Stem Packing Gland Stem Seals Seats Gland Screws Gland Plate Stem Nut Lever Stem Bearing Stop Stop Screw Lock Plate Body Seal Grounding Spring Body Joint Stud Body Joint Nut Lockwasher

ASTM A352-LCC ASTM A352-LCC ASTM A276-316 or A351-CF8M ASTM A276-316 ASTM A108 Type 1215 PTFE RPTFE ASTM A193 B7 302 or 304 SS ASTM A194 Grade 8 ASTM A366 Steel with Vinyl Grip RPTFE ASTM A108 Type 1215 SAE J429 Grade 2 ASTM A366 Steel RPTFE SS ASTM A193 Grade B7 ASTM A194 Grade 2H 302 or 304 SS

OPTIONS AVAILABLE: (MORE INFORMATION IN SECTION J)

• Minimum quantities apply • To specify an option, replace the “01” standard suffix with the suffix of the option. • To specify multiple options, replace the “01” suffix with the desired suffixes in the numerical order shown below. NOTE: Not all suffixes can be combined together. (SUFFIX)

-01 -04-10-14-21-24-26-35-38-49-59-65-67-69-70-73-76-77-80-82-90-9P-CE-EP-KF-MG-MH-MJ-MK-TC-TD-UL-

ACTUATOR MOUNTING

OPTION

Standard Configuration 2.25” Stem Extension (Carbon Steel, Zinc Plated) SS Lever and Nut Side Vented Ball (Uni-Directional). Not available with plated CS ball. UHMWPE Seats Graphite packing, spiral wound graphite body seal, RPTFE bearing (API 607, 6th edition, ISO 10497:2010) Chlorine Service. Vented. Special Cleaning. Assembled dry. (for CS, Hastelloy and Ni-Cu valves. Ball must be Hastelloy or Ni-CU) PTFE Seats and Seals PEEK Seats and Graphite Packing No Lubrication. Assembled Dry. SS External Trim MPTFE Seats and Graphite Packing (Fire Safe) Cleaned For Industrial Gases Drilled and Tapped Purge Port with Plugs 4” Extended Bonnet 316 SS Spiral Wound Gaskets w/PTFE Filler Live Loaded (Lever) Live Loaded (Gear, Actuator) Multi-Seal (Super TFE) Flat Face Flanges Double Packed 4” Extended Bonnet Double Packed 4” Extended Bonnet with Monitoring Port CE Marking. See Page D-3 “Product Approvals” for availability. Garlock EVSP Stem Packing w/Spiral Wound Graphite Gasket (Fire Safe by Design) PCTFE Stem Bearing Gear Operator with Standard Handwheel Gear Operator with Standard Handwheel & Locking Device Gear Operator with Oversize Handwheel Gear Operator with Oversize Handwheel & Locking Device With Test Certificate Tested to API Spec 6D UL Listed

Pressure/Temperature Ratings - Page M-23, Graph No. 31

DIMENSIONS PRODUCT NUMBER 88L-149-01 88L-140-01

SIZE

A

B

C

2.5” 3”

D

E

F

2.00

7.50

2.50

8.00

G

H

I

J

K

L

M

3.50

5.61

8.41

3.51

6.24

8.41

0.80

3.31

4.08

1.949

0.974

0.750

0.477

5/16-18

2.50

27

0.80

3.94

4.71

1.949

0.974

0.750

0.477

5/16-18

3.00

34

REV. 04MAY17 D-74

Customer Service (704) 841-6000

www.apolloflowcontrols.com

N

WT.

“Apollo” Flow Controls

88L-140 SERIES LOW TEMP. CARBON STEEL ASME CLASS 150 FLANGED STD. PORT BALL VALVE - 4” THRU 8” FOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3 AND RATED TO -50°F (-46°C). STANDARD MATERIAL LIST

VARIATIONS AVAILABLE

PART 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21

• 88L-140 Series (316 SS Ball & Stem)

MATERIAL

Body Retainer Ball Stem Packing Gland Stem Seals Seats Gland Screws Gland Plate Adaptor Screw Handle Adapter Stem Bearing Stop Stop Screw Lock Plate Body Seal Grounding Spring Body Joint Stud Body Joint Nut Adapter Screw Pipe Handle

ASTM A352-LCC ASTM A352-LCC ASTM A276-316 or A351-CF8M ASTM A276-316 ASTM A108 Type 1215 PTFE RPTFE ASTM A193 B7 316 SS 316 SS ASTM A366 Steel with Vinyl Grip RPTFE ASTM A108 Type 1215 SAE J429 Grade 2 ASTM A366 Steel RPTFE SS ASTM A193 Grade B7 ASTM A194 Grade 2H 18-8 SS Galvanized Steel (not shown)

OPTIONS AVAILABLE: (MORE INFORMATION IN SECTION J)

• Minimum quantities apply • To specify an option, replace the “01” standard suffix with the suffix of the option. • To specify multiple options, replace the “01” suffix with the desired suffixes in the numerical order shown below. NOTE: Not all suffixes can be combined together. (SUFFIX)

-01 -14-21-24-26-35-49-59-65-67-69-70-73-76-77-80-82-90-9P-CE-EP-KF-MG-MH-MJ-MK-TC-TD-UL-

ACTUATOR MOUNTING

OPTION

Standard Configuration Side Vented Ball (Uni-Directional). Not available with plated CS ball. UHMWPE Seats Graphite packing, spiral wound graphite body seal, RPTFE bearing (API 607, 6th edition, ISO 10497:2010) Chlorine Service. Vented. Special Cleaning. Assembled dry. (for CS, Hastelloy and Ni-Cu valves. Ball must be Hastelloy or Ni-CU) PTFE Seats and Seals No Lubrication. Assembled Dry. SS External Trim MPTFE Seats and Graphite Packing (Fire Safe) Cleaned For Industrial Gases Drilled and Tapped Purge Ports with Plugs 4” Extended Bonnet 316 SS Spiral Wound Gaskets w/PTFE Filler Live Loaded (Lever) Live Loaded (Gear, Actuator) Multi-Seal (Super TFE) Flat Face Flanges Double Packed 4” Extended Bonnet Double Packed 4” Extended Bonnet with Monitoring Port CE Marking. See Page D-3 “Product Approvals” for availability. Garlock EVSP Stem Packing w/Spiral Wound Graphite Gasket (Fire Safe by Design) PCTFE Stem Bearing Gear Operator with Standard Handwheel Gear Operator with Standard Handwheel & Locking Device Gear Operator with Oversize Handwheel Gear Operator with Oversize Handwheel & Locking Device With Test Certificate Tested to API Spec 6D UL Listed

Pressure/Temperature Ratings - Page M-23, Graph No. 31

DIMENSIONS PRODUCT NUMBER 88L-14A-01

SIZE

A

B

C

D

E

F

G

H

I

J

K

L

M

N

WT.

4”

3.00

9.00

4.18

8.80

3.88

0.50

4.75

5.95

2.840

1.420

1.250

0.725

3/8-16

4.00

73

88L-14C-01

6”

4.00

10.50

4.69

9.99

5.13

0.50

5.94

7.13

2.840

1.420

1.250

0.725

3/8-16

6.00

117

88L-14E-01

8”

6.00

18.00

9.00

13.73

7.00

1.00

7.75

9.48

4.596

2.298

2.000

1.375

3/4-10

8.00

310

“Apollo” Flow Controls

REV. 04MAY17 industrial.apollovalves.com

Customer Service (704) 841-6000

D-75

88L-140 SERIES LOW TEMP. CARBON STEEL ASME CLASS 150 FLANGED STD. PORT BALL VALVE - 10” FOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3 AND RATED TO -50°F (-46°C). STANDARD MATERIAL LIST

VARIATIONS AVAILABLE

PART 1 2 3 4 5 6 7 8 9 10 11 12 13

• 88L-130 Series (Ni-Cu Ball & Stem)

MATERIAL

Body Retainer Ball Stem Packing Gland Stem Seals Seats Gland Screws Gland Plate Stem Bearing Body Seal Body Joint Stud Body Joint Nut

ASTM A352-LCC ASTM A352-LCC ASTM A276-316 or A351-CF8M ASTM A276-316 ASTM A108 Type 1215 PTFE RPTFE ASTM A193 B7 316 SS RPTFE RPTFE ASTM A193 Grade B7 ASTM A194 Grade 2H

OPTIONS AVAILABLE: (MORE INFORMATION IN SECTION J)

• Minimum quantities apply • To specify an option, replace the “01” standard suffix with the suffix of the option. • To specify multiple options, replace the “01” suffix with the desired suffixes in the numerical order shown below. NOTE: Not all suffixes can be combined together. (SUFFIX)

-01 -14-21-24-26-35-49-65-67-69-70-77-80-82-90-9P-CE-EP-KF-MG-MH-MJ-MK-TC-TD-UL-

OPTION

Standard Configuration Side Vented Ball (Uni-Directional). Not available with plated CS ball. UHMWPE Seats Graphite packing, spiral wound graphite body seal, RPTFE bearing (API 607, 6th edition, ISO 10497:2010) Chlorine Service. Vented. Special Cleaning. Assembled dry. (for CS, Hastelloy and Ni-Cu valves. Ball must be Hastelloy or Ni-CU) PTFE Seats and Seals No Lubrication. Assembled Dry. MPTFE Seats and Graphite Packing (Fire Safe) Cleaned For Industrial Gases Drilled and Tapped Purge Port with Plugs 4” Extended Bonnet Live Loaded (Gear, Actuator) Multi-Seal (Super TFE) Flat Face Flanges Double Packed 4” Extended Bonnet Double Packed 4” Extended Bonnet with Monitoring Port CE Marking. See Page D-3 “Product Approvals” for availability. Garlock EVSP Stem Packing w/Spiral Wound Graphite Gasket (Fire Safe by Design) PCTFE Stem Bearing Gear Operator with Standard Handwheel Gear Operator with Standard Handwheel & Locking Device Gear Operator with Oversize Handwheel Gear Operator with Oversize Handwheel & Locking Device With Test Certificate Tested to API Spec 6D UL Listed

Pressure/Temperature Ratings - Page M-23, Graph No. 31

ACTUATOR MOUNTING

DIMENSIONS PRODUCT NUMBER 88L-14G-01

SIZE

A

B

C

D

E

F

G

H

I

J

K

L

M

10”

8.00

21.00

10.37

12.83

9.18

1.00

10.22

4.596

2.298

2.000

1.375

3/4-10

10.00

REV. 04MAY17 D-76

Customer Service (704) 841-6000

www.apolloflowcontrols.com

“Apollo” Flow Controls

88L-240 SERIES LOW TEMP. CARBON STEEL ASME CLASS 150 FLANGED FULL PORT BALL VALVE - 1/2” THRU 1” FOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3 AND RATED TO -50°F (-46°C). STANDARD MATERIAL LIST

VARIATIONS AVAILABLE

PART (1/2”& 3/4” VALVES) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

Body Retainer Ball Stem Packing Gland Stem Seals Seats Stem Nut Lever Stem Bearing Stop Body Seal Lock Washer Grounding Spring Grounding Spring

ASTM A352-LCC ASTM A352-LCC ASTM A276-316 ASTM A276-316 ASTM A108 Type 1215 PTFE RPTFE 300 Series Stainless Steel 300 Series Stainless Steel w/Vinyl Grip RPTFE 300 Series Stainless Steel RPTFE 300 Series Stainless Steel ASTM A313 Stainless Steel ASTM A313 Stainless Steel

PART (1” VALVES) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18

• 88L-230 Series (Ni-Cu Ball & Stem)

MATERIAL

OPTIONS AVAILABLE: (MORE INFORMATION IN SECTION J)

• Minimum quantities apply • To specify an option, replace the “01” standard suffix with the suffix of the option. • To specify multiple options, replace the “01” suffix with the desired suffixes in the numerical order shown below. NOTE: Not all suffixes can be combined together. (SUFFIX)

-01 -04-10-14-15-21-24-26-

MATERIAL

Body Retainer Ball Stem Packing Gland Stem Seals Seats Gland Screws Gland Plate Stem Nut Lever Stem Bearing Stop Stop Screw Lock Plate Body Seal Lockwasher Grounding Spring

ASTM A352-LCC ASTM A352-LCC ASTM A276-316 ASTM A276-316 ASTM A108 Type 1215 PTFE RPTFE ASTM A193 B7 302 or 304 SS 316 SS ASTM A366 Steel with Vinyl Grip RPTFE ASTM A108 Type 1215 SAE J429 Grade 2 ASTM A366 Steel RPTFE 302 or 304 SS SS

-35-38-49-65-67-69-70-73-76-77-80-82-90-9P-CE-EP-KF-TC-TD-UL-

Pressure/Temperature Ratings - Page M-23, Graph No. 31

OPTION

Standard Configuration 2.25” Stem Extension (Carbon Steel, Zinc Plated) SS Lever and Nut Side Vented Ball (Uni-Directional). Not available with plated CS ball. Wheel Handle, Steel UHMWPE Seats Graphite packing, spiral wound graphite body seal, RPTFE bearing (API 607, 6th edition, ISO 10497:2010) Chlorine Service. Vented. Special Cleaning. Assembled dry. (for CS, Hastelloy and Ni-Cu valves. Ball must be Hastelloy or Ni-CU) PTFE Seats and Seals PEEK Seats and Graphite Packing No Lubrication. Assembled Dry. MPTFE Seats and Graphite Packing (Fire Safe) Cleaned For Industrial Gases Drilled and Tapped Purge Port with Plug 4” Extended Bonnet 316 SS Spiral Wound Gaskets w/PTFE Filler Live Loaded (Lever) Live Loaded (Gear, Actuator) Multi-Seal (Super TFE) Flat Face Flanges Double Packed 4” Extended Bonnet Double Packed 4” Extended Bonnet with Monitoring Port CE Marking. See Page D-3 “Product Approvals” for availability. Garlock EVSP Stem Packing w/Spiral Wound Graphite Gasket (Fire Safe by Design) PCTFE Stem Bearing With Test Certificate Tested to API Spec 6D UL Listed

1/2” & 3/4” VALVES

1” VALVE

DIMENSIONS PRODUCT NUMBER 88L-243-01

SIZE

A

B

C

D

E

F

G

H

I

J

K

L

M

WT.

1/2”

0.50

4.25

2.06

3.31

5.11

0.30

1.09

1.41

1.002

0.501

0.375

0.245

10-24

5

88L-244-01

3/4”

0.75

4.62

2.18

3.89

5.53

0.36

1.65

1.99

1.392

0.696

0.500

0.287

1/4-20

6

88L-245-01

1”

1.00

5.00

2.32

4.62

6.53

0.47

1.62

2.15

1.392

0.696

0.500

0.287

1/4-20

7

“Apollo” Flow Controls

REV. 04MAY17 industrial.apollovalves.com

Customer Service (704) 841-6000

D-77

88L-240 SERIES LOW TEMP. CARBON STEEL ASME CLASS 150 FLANGED FULL PORT BALL VALVE - 1.5” THRU 2.5” FOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3 AND RATED TO -50°F (-46°C). STANDARD MATERIAL LIST

VARIATIONS AVAILABLE

PART 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20

• 88L-230 Series (Ni-Cu Ball & Stem)

MATERIAL

Body Retainer Ball Stem Packing Gland Stem Seals Seats Gland Screws Gland Plate Stem Nut Lever Stem Bearing Stop Stop Screw Lock Plate Body Seal Grounding Spring Body Joint Stud Body Joint Nut Lockwasher

ASTM A352-LCC ASTM A352-LCC ASTM A276-316 or A351-CF8M ASTM A276-316 ASTM A108 Type 1215 PTFE RPTFE ASTM A193 B7 302 & 304 SS ASTM A194 Grade 8l ASTM A366 Steel with Vinyl Grip RPTFE ASTM A108 Type 1215 SAE J429 Grade 2 ASTM A366 Steel RPTFE SS ASTM A193 Grade B7 ASTM A194 Grade 2H 302 or 304 SS

OPTIONS AVAILABLE: (MORE INFORMATION IN SECTION J)

• Minimum quantities apply • To specify an option, replace the “01” standard suffix with the suffix of the option. • To specify multiple options, replace the “01” suffix with the desired suffixes in the numerical order shown below. NOTE: Not all suffixes can be combined together. (SUFFIX)

-01 -04-10-14-15-21-24-26-35-38-49-59-65-67-69-70-73-76-77-80-82-90-9P-CE-EP-KF-MG-MH-MJ-MK-TC-TD-UL-

ACTUATOR MOUNTING

OPTION

Standard Configuration 2.25” Stem Extension (Carbon Steel, Zinc Plated) (up to 2”) SS Lever and Nut Side Vented Ball (Uni-Directional). Not available with plated CS ball. Wheel Handle, Steel UHMWPE Seats Graphite packing, spiral wound graphite body seal, RPTFE bearing (API 607, 6th edition, ISO 10497:2010) Chlorine Service. Vented. Special Cleaning. Assembled dry. (for CS, Hastelloy and Ni-Cu valves. Ball must be Hastelloy or Ni-CU) PTFE Seats and Seals PEEK Seats and Graphite Packing No Lubrication. Assembled Dry. SS External Trim MPTFE Seats and Graphite Packing (Fire Safe) Cleaned For Industrial Gases Drilled and Tapped Purge Ports with Plugs 4” Extended Bonnet 316 SS Spiral Wound Gaskets w/PTFE Filler Live Loaded (Lever) Live Loaded (Gear, Actuator) Multi-Seal (Super TFE) Flat Face Flanges Double Packed 4” Extended Bonnet Double Packed 4” Extended Bonnet with Monitoring Port CE Marking. See Page D-3 “Product Approvals” for availability. Garlock EVSP Stem Packing w/Spiral Wound Graphite Gasket (Fire Safe by Design) PCTFE Stem Bearing Gear Operator with Standard Handwheel Gear Operator with Standard Handwheel & Locking Device Gear Operator with Oversize Handwheel Gear Operator with Oversize Handwheel & Locking Device With Test Certificate Tested to API Spec 6D UL Listed

Pressure/Temperature Ratings - Page M-23, Graph No. 31

DIMENSIONS PRODUCT NUMBER 88L-247-01

SIZE

A

B

C

D

E

F

G

H

I

J

L

M

WT.

1.5”

1.50

6.50

3.00

4.62

6.65

0.72

2.41

3.09

1.949

0.974

0.625

0.412

5/16-18

14

88L-248-01

2”

2.00

7.00

3.04

5.61

8.41

0.80

3.31

4.08

1.949

0.974

0.750

0.477

5/16-18

25

88L-249-01

2.5”

2.50

7.50

3.34

6.24

8.41

0.80

3.94

4.71

1.949

0.974

0.750

0.477

5/16-18

30

REV. 04MAY17 D-78

K

Customer Service (704) 841-6000

www.apolloflowcontrols.com

“Apollo” Flow Controls

88L-240 SERIES LOW TEMP. CARBON STEEL ASME CLASS 150 FLANGED FULL PORT BALL VALVE - 3” THRU 6” FOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3 AND RATED TO -50°F (-46°C). STANDARD MATERIAL LIST

VARIATIONS AVAILABLE

PART 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20

• 88L-230 Series (Ni-Cu Ball & Stem)

MATERIAL

Body Retainer Ball Stem Packing Gland Stem Seals Seats Gland Screws Gland Plate Adapter Screw Handle Adapter Stem Bearing Stop Stop Screw Lock Plate Body Seal Grounding Spring Body Joint Stud Body Joint Nut Pipe Handle

ASTM A352-LCC ASTM A352-LCC ASTM A276-316 or A351-CF8M ASTM A276-316 ASTM A108 Type 1215 PTFE RPTFE ASTM A193 B7 316 SS 316 SS ASTM A366 Steel with Vinyl Grip RPTFE ASTM A108 Type 1215 SAE J429 Grade 2 ASTM A366 Steel RPTFE SS ASTM A193 Grade B7 ASTM A194 Grade 2H Galvanized Steel (not shown)

OPTIONS AVAILABLE: (MORE INFORMATION IN SECTION J)

• Minimum quantities apply • To specify an option, replace the “01” standard suffix with the suffix of the option. • To specify multiple options, replace the “01” suffix with the desired suffixes in the numerical order shown below. NOTE: Not all suffixes can be combined together. (SUFFIX)

-01 -14-21-24-26-35-38-49-59-65-67-69-70-73-76-77-80-82-90-9P-CE-EP-KF-MG-MH-MJ-MK-TC-TD-UL-

ACTUATOR MOUNTING

OPTION

Standard Configuration Side Vented Ball (Uni-Directional). Not available with plated CS ball. UHMWPE Seats Graphite packing, spiral wound graphite body seal, RPTFE bearing (API 607, 6th edition, ISO 10497:2010) Chlorine Service. Vented. Special Cleaning. Assembled dry. (for CS, Hastelloy and Ni-Cu valves. Ball must be Hastelloy or Ni-CU) PTFE Seats and Seals PEEK Seats and Graphite Packing No Lubrication. Assembled Dry. SS External Trim MPTFE Seats and Graphite Packing (Fire Safe) Cleaned For Industrial Gases Drilled and Tapped Purge Port with Plug 4” Extended Bonnet 316 SS Spiral Wound Gaskets w/PTFE Filler Live Loaded (Lever) Live Loaded (Gear, Actuator) Multi-Seal (Super TFE) Flat Face Flanges Double Packed 4” Extended Bonnet Double Packed 4” Extended Bonnet with Monitoring Port CE Marking. See Page D-3 “Product Approvals” for availability. Garlock EVSP Stem Packing w/Spiral Wound Graphite Gasket (Fire Safe by Design) PCTFE Stem Bearing Gear Operator with Standard Handwheel Gear Operator with Standard Handwheel & Locking Device Gear Operator with Oversize Handwheel Gear Operator with Oversize Handwheel & Locking Device With Test Certificate Tested to API Spec 6D UL Listed

Pressure/Temperature Ratings - Page M-23, Graph No. 31

DIMENSIONS PRODUCT NUMBER 88L-240-01

SIZE

A

B

C

D

E

F

G

H

I

J

K

L

M

WT. 60

3”

3.00

8.00

3.68

8.80

3.88

0.50

4.75

5.95

2.840

1.420

1.250

0.725

3/8-16

88L-24A-01

4”

4.00

9.00

3.94

9.99

5.13

0.50

5.94

7.13

2.840

1.420

1.250

0.725

3/8-16

91

88L-24C-01

6”

6.00

15.50

7.19

13.73

7.00

1.00

7.75

9.48

4.596

2.298

2.000

1.375

3/4-10

248

“Apollo” Flow Controls

REV. 04MAY17 industrial.apollovalves.com

Customer Service (704) 841-6000

D-79

88L-240 SERIES LOW TEMP. CARBON STEEL ASME CLASS 150 FLANGED FULL PORT BALL VALVE - 8” THRU 12” FOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3 AND RATED TO -50°F (-46°C). STANDARD MATERIAL LIST

VARIATIONS AVAILABLE

PART 1 2 3 4 5 6 7 8 9 10 11 12 13

• 88L-230 Series (Ni-Cu Ball & Stem)

MATERIAL

Body Retainer Ball Stem Packing Gland Stem Seals Seats Gland Screws Gland Plate Stem Bearing Body Seal Body Joint Stud Body Joint Nut

ASTM A352-LCC ASTM A352-LCC ASTM A276-316 or A351-CF8M ASTM A276-316 ASTM A108 Type 1215 PTFE RPTFE ASTM A193 B7 316 SS RPTFE RPTFE ASTM A193 Grade B7 ASTM A194 Grade 2H

OPTIONS AVAILABLE: (MORE INFORMATION IN SECTION J)

• Minimum quantities apply • To specify an option, replace the “01” standard suffix with the suffix of the option. • To specify multiple options, replace the “01” suffix with the desired suffixes in the numerical order shown below. NOTE: Not all suffixes can be combined together. (SUFFIX)

-01 -14-21-24-26-35-49-65-67-69-70-77-80-82-90-9P-CE-EP-KF-MG-MH-MJ-MK-TC-TD-UL-

ACTUATOR MOUNTING

OPTION

Standard Configuration Side Vented Ball (Uni-Directional). Not available with plated CS ball. UHMWPE Seats Graphite packing, spiral wound graphite body seal, RPTFE bearing (API 607, 6th edition, ISO 10497:2010) Chlorine Service. Vented. Special Cleaning. Assembled dry. (for CS, Hastelloy and Ni-Cu valves. Ball must be Hastelloy or Ni-CU) PTFE Seats and Seals No Lubrication. Assembled Dry. MPTFE Seats and Graphite Packing (Fire Safe) Cleaned for Industrial Gas Drilled and Tapped Purge Ports with Plugs 4” Extended Bonnet (8” Only) Live Loaded (Gear, Actuator) Multi-Seal (Super TFE) Flat Face Flanges Double Packed 4” Extended Bonnet Double Packed 4” Extended Bonnet with Monitoring Port CE Marking. See Page D-3 “Product Approvals” for availability. Garlock EVSP Stem Packing w/Spiral Wound Graphite Gasket (Fire Safe by Design) PCTFE Stem Bearing Gear Operator with Standard Handwheel Gear Operator with Standard Handwheel & Locking Device Gear Operator with Oversize Handwheel Gear Operator with Oversize Handwheel & Locking Device With Test Certificate Tested to API Spec 6D UL Listed

Pressure/Temperature Ratings - Page M-23, Graph No. 31

10” & 12”

8”

DIMENSIONS PRODUCT NUMBER 88L-24E-01

SIZE

A

B

C

D

E

F

G

8”

8.00

18.00

8.88

12.83

9.18

1.00

10.22

88L-24G-01

10”

10.00

21.00

10.26

18.57

11.33

2.31

12.80

88L-24H-01

12”

12.00

24.00

12.09

20.31

13.40

2.31

14.92

REV. 04MAY17 D-80

Customer Service (704) 841-6000

www.apolloflowcontrols.com

“Apollo” Flow Controls

88L-740 SERIES LOW TEMP. CARBON STEEL ASME CLASS 300 FLANGED STD. PORT BALL VALVE - 1.5” THRU 2” FOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3 AND RATED TO -50°F (-46°C). STANDARD MATERIAL LIST

VARIATIONS AVAILABLE

PART 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18

• 88L-730 Series (Ni-Cu Ball & Stem)

MATERIAL

Body Retainer Ball Stem Packing Gland Stem Seals Seats Gland Screws Gland Plate Stem Nut Lever Stem Bearing Stop Stop Screw Lock Plate Body Seal Lockwasher Grounding Spring

ASTM A352-LCC ASTM A352-LCC ASTM A276-316 ASTM A276-316 ASTM A108 Type 1215 PTFE RPTFE ASTM A193 B7 302 & 304 SS 316 SS ASTM A366 Steel with Vinyl Grip RPTFE ASTM A108 Type 1215 SAE J429 Grade 2 ASTM A366 Steel RPTFE 302 or 304 SS SS

OPTIONS AVAILABLE: (MORE INFORMATION IN SECTION J)

• Minimum quantities apply • To specify an option, replace the “01” standard suffix with the suffix of the option. • To specify multiple options, replace the “01” suffix with the desired suffixes in the numerical order shown below. NOTE: Not all suffixes can be combined together. (SUFFIX)

-01 -04-10-14-15-21-24-26-35-38-49-65-67-69-70-73-76-77-80-82-90-9P-CE-EP-KF-TC-TD-UL-

OPTION

Standard Configuration 2.25” Stem Extension (Carbon Steel, Zinc Plated) SS Lever and Nut Side Vented Ball (Uni-Directional). Not available with plated CS ball. Wheel Handle, Steel UHMWPE Seats Graphite packing, spiral wound graphite body seal, RPTFE bearing (API 607, 6th edition, ISO 10497:2010) Chlorine Service. Vented. Special Cleaning. Assembled dry. (for CS, Hastelloy and Ni-Cu valves. Ball must be Hastelloy or Ni-CU) PTFE Seats and Seals PEEK Seats and Graphite Packing No Lubrication. Assembled Dry. MPTFE Seats and Graphite Packing (Fire Safe) Cleaned For Industrial Gases Drilled and Tapped Purge Ports with Plugs 4” Extended Bonnet 316 SS Spiral Wound Gaskets w/PTFE Filler Live Loaded (Lever) Live Loaded (Gear, Actuator) Multi-Seal (Super TFE) Flat Face Flanges Double Packed 4” Extended Bonnet Double Packed 4” Extended Bonnet with Monitoring Port CE Marking. See Page D-3 “Product Approvals” for availability. Garlock EVSP Stem Packing w/Spiral Wound Graphite Gasket (Fire Safe by Design) PCTFE Stem Bearing With Test Certificate Tested to API Spec 6D UL Listed

Pressure/Temperature Ratings - Page M-23, Graph No. 32

ACTUATOR MOUNTING

DIMENSIONS PRODUCT NUMBER 88L-747-01 88L-748-01

SIZE

A

B

C

D

E

F

G

H

I

J

K

L

M

N

WT.

1.5”

1.25

7.50

4.50

4.85

6.53

0.47

1.85

2.38

1.392

0.696

0.500

0.287

1/4-20

1.50

16

2”

1.50

8.50

5.19

4.62

6.65

0.72

2.41

3.09

1.949

0.974

0.625

0.412

5/16-18

2.00

24

“Apollo” Flow Controls

REV. 04MAY17 industrial.apollovalves.com

Customer Service (704) 841-6000

D-81

88L-740 SERIES LOW TEMP. CARBON STEEL ASME CLASS 300 FLANGED STD. PORT BALL VALVE - 2.5” THRU 3” FOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3 AND RATED TO -50°F (-46°C). STANDARD MATERIAL LIST

VARIATIONS AVAILABLE

PART 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20

• 88L-730 Series (Ni-Cu Ball & Stem)

MATERIAL

Body Retainer Ball Stem Packing Gland Stem Seals Seats Gland Screws Gland Plate Stem Nut Lever Stem Bearing Stop Stop Screw Lock Plate Body Seal Grounding Spring Body Joint Stud Body Joint Nut Lockwasher

ASTM A352-LCC ASTM A352-LCC ASTM A276-316 or A351-CF8M ASTM A276-316 ASTM A108 Type 1215 PTFE RPTFE ASTM A193 B7 302 or 304 SS ASTM A194 Grade 8 ASTM A366 Steel with Vinyl Grip RPTFE ASTM A108 Type 1215 SAE J429 Grade 2 ASTM A366 Steel RPTFE SS ASTM A193 Grade B7 ASTM A194 Grade 2H 302 or 304 SS

OPTIONS AVAILABLE: (MORE INFORMATION IN SECTION J)

• Minimum quantities apply • To specify an option, replace the “01” standard suffix with the suffix of the option. • To specify multiple options, replace the “01” suffix with the desired suffixes in the numerical order shown below. NOTE: Not all suffixes can be combined together. (SUFFIX)

-01 -04-10-14-15-21-24-26-35-38-49-59-65-67-69-70-73-76-77-80-82-90-9P-CE-EP-KF-MG-MH-MJ-MK-TC-TD-UL-

ACTUATOR MOUNTING

OPTION

Standard Configuration 2.25” Stem Extension (Carbon Steel, Zinc Plated) SS Lever and Nut Side Vented Ball (Uni-Directional). Not available with plated CS ball. Wheel Handle, Steel UHMWPE Seats Graphite packing, spiral wound graphite body seal, RPTFE bearing (API 607, 6th edition, ISO 10497:2010) Chlorine Service. Vented. Special Cleaning. Assembled dry. (for CS, Hastelloy and Ni-Cu valves. Ball must be Hastelloy or Ni-CU) PTFE Seats and Seals PEEK Seats and Graphite Packing No Lubrication. Assembled Dry. SS External Trim MPTFE Seats and Graphite Packing (Fire Safe) Cleaned For Industrial Gases Drilled and Tapped Purge Port with Plug 4” Extended Bonnet 316 SS Spiral Wound Gaskets w/PTFE Filler Live Loaded (Lever) Live Loaded (Gear, Actuator) Multi-Seal (Super TFE) Flat Face Flanges Double Packed 4” Extended Bonnet Double Packed 4” Extended Bonnet with Monitoring Port CE Marking. See Page D-3 “Product Approvals” for availability. Garlock EVSP Stem Packing w/Spiral Wound Graphite Gasket (Fire Safe by Design) PCTFE Stem Bearing Gear Operator with Standard Handwheel Gear Operator with Standard Handwheel & Locking Device Gear Operator with Oversize Handwheel Gear Operator with Oversize Handwheel & Locking Device With Test Certificate Tested to API Spec 6D UL Listed

Pressure/Temperature Ratings - Page M-23, Graph No. 32

DIMENSIONS PRODUCT NUMBER 88L-749-01 88L-740-01

SIZE

A

B

2.5”

2.00

9.50

3”

2.50

11.12

C

D

E

F

G

H

I

J

K

L

M

4.75

5.61

8.41

5.56

6.24

8.41

0.80

3.31

4.08

1.949

0.974

0.750

0.477

0.80

3.94

4.71

1.949

0.974

0.750

0.477

REV. 04MAY17 D-82

Customer Service (704) 841-6000

www.apolloflowcontrols.com

N

WT.

5/16-18

2.50

39

5/16-18

3.00

55

“Apollo” Flow Controls

88L-740 SERIES LOW TEMP. CARBON STEEL ASME CLASS 300 FLANGED STD. PORT BALL VALVE - 4” THRU 8” FOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3 AND RATED TO -50°F (-46°C). STANDARD MATERIAL LIST

VARIATIONS AVAILABLE

PART 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21

• 88L-730 Series (Ni-Cu Ball & Stem)

MATERIAL

Body Retainer Ball Stem Packing Gland Stem Seals Seats Gland Screws Gland Plate Adapter Screw Handle Adapter Stem Bearing Stop Stop Screw Lock Plate Body Seal Grounding Spring Body Joint Stud Body Joint Nut Adapter Screw Pipe Handle

ASTM A352-LCC ASTM A352-LCC ASTM A276-316 or A351-CF8M ASTM A276-316 ASTM A108 Type 1215 PTFE RPTFE ASTM A193 B7 316 SS 316 SS ASTM A366 Steel with Vinyl Grip RPTFE ASTM A108 Type 1215 SAE J429 Grade 2 ASTM A366 Steel RPTFE SS ASTM A193 Grade B7 ASTM A194 Grade 2H 316 SS Galvanized Steel (not shown)

OPTIONS AVAILABLE: (MORE INFORMATION IN SECTION J)

• Minimum quantities apply • To specify an option, replace the “01” standard suffix with the suffix of the option. • To specify multiple options, replace the “01” suffix with the desired suffixes in the numerical order shown below. NOTE: Not all suffixes can be combined together. (SUFFIX)

-01 -14-21-24-26-35-49-59-65-67-69-70-73-76-77-80-82-90-9P-CE-EP-KF-MG-MH-MJ-MK-TC-TD-UL-

OPTION

Standard Configuration Side Vented Ball (Uni-Directional). Not available with plated CS ball. UHMWPE Seats Graphite packing, spiral wound graphite body seal, RPTFE bearing (API 607, 6th edition, ISO 10497:2010) Chlorine Service. Vented. Special Cleaning. Assembled dry. (for CS, Hastelloy and Ni-Cu valves. Ball must be Hastelloy or Ni-CU) PTFE Seats and Seals No Lubrication. Assembled Dry. SS External Trim MPTFE Seats and Graphite Packing (Fire Safe) Cleaned For Industrial Gases Drilled and Tapped Purge Ports with Plugs 4” Extended Bonnet 316 SS Spiral Wound Gaskets w/PTFE Filler Live Loaded (Lever) Live Loaded (Gear, Actuator) Multi-Seal (Super TFE) Flat Face Flanges Double Packed 4” Extended Bonnet Double Packed 4” Extended Bonnet with Monitoring Port CE Marking. See Page D-3 “Product Approvals” for availability. Garlock EVSP Stem Packing w/Spiral Wound Graphite Gasket (Fire Safe by Design) PCTFE Stem Bearing Gear Operator with Standard Handwheel Gear Operator with Standard Handwheel & Locking Device Gear Operator with Oversize Handwheel Gear Operator with Oversize Handwheel & Locking Device With Test Certificate Tested to API Spec 6D UL Listed

Pressure/Temperature Ratings - Page M-23, Graph No. 32

ACTUATOR MOUNTING

DIMENSIONS PRODUCT NUMBER 88L-74A-01

SIZE

A

B

C

D

E

F

G

H

I

J

K

L

M

N

WT.

4”

3.00

12.00

5.68

8.80

4.06

0.50

4.75

5.95

2.840

1.420

1.250

0.725

3/8-16

4.00

95

88L-74C-01

6”

4.00

15.88

7.38

9.99

5.25

0.50

5.94

7.13

2.840

1.420

1.250

0.725

3/8-16

6.00

187

88L-74E-01

8”

6.00

19.75

9.00

13.73

7.30

1.00

7.75

9.48

4.596

2.298

2.000

1.375

3/4-10

8.00

400

“Apollo” Flow Controls

REV. 04MAY17 industrial.apollovalves.com

Customer Service (704) 841-6000

D-83

88L-740 SERIES LOW TEMP. CARBON STEEL ASME CLASS 300 FLANGED STD. PORT BALL VALVE - 10” FOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3 AND RATED TO -50°F (-46°C). STANDARD MATERIAL LIST

VARIATIONS AVAILABLE

PART 1 2 3 4 5 6 7 8 9 10 11 12 13

• 88L-730 Series (Ni-Cu Ball & Stem)

MATERIAL

Body Retainer Ball Stem Packing Gland Stem Seals Seats Gland Screws Gland Plate Stem Bearing Body Seal Body Joint Stud Body Joint Nut

ASTM A352-LCC ASTM A352-LCC ASTM A276-316 or A351-CF8M ASTM A276-316 ASTM A108 Type 1215 PTFE RPTFE ASTM A193 B7 316 SS RPTFE RPTFE ASTM A193 Grade B7 ASTM A194 Grade 2H

OPTIONS AVAILABLE: (MORE INFORMATION IN SECTION J)

• Minimum quantities apply • To specify an option, replace the “01” standard suffix with the suffix of the option. • To specify multiple options, replace the “01” suffix with the desired suffixes in the numerical order shown below. NOTE: Not all suffixes can be combined together. (SUFFIX)

-01 -14-21-24-26-35-49-57-65-67-69-70-77-80-82-90-9P-CE-EP-KF-MG-MH-MJ-MK-TC-TD-UL-

ACTUATOR MOUNTING

OPTION

Standard Configuration Side Vented Ball (Uni-Directional). Not available with plated CS ball. UHMWPE Seats Graphite packing, spiral wound graphite body seal, RPTFE bearing (API 607, 6th edition, ISO 10497:2010) Chlorine Service. Vented. Special Cleaning. Assembled dry. (for CS, Hastelloy and Ni-Cu valves. Ball must be Hastelloy or Ni-CU) PTFE Seats and Seals No Lubrication. Assembled Dry. Oxygen Cleaned MPTFE Seats and Graphite Packing (Fire Safe) Cleaned For Industrial Gases Drilled and Tapped Purge Port with Plugs 4” Extended Bonnet Live Loaded (Gear, Actuator) Multi-Seal (Super TFE) Flat Face Flanges Double Packed 4” Extended Bonnet Double Packed 4” Extended Bonnet with Monitoring Port CE Marking. See Page D-3 “Product Approvals” for availability. Garlock EVSP Stem Packing w/Spiral Wound Graphite Gasket (Fire Safe by Design) PCTFE Stem Bearing Gear Operator with Standard Handwheel Gear Operator with Standard Handwheel & Locking Device Gear Operator with Oversize Handwheel Gear Operator with Oversize Handwheel & Locking Device With Test Certificate Tested to API Spec 6D UL Listed

Pressure/Temperature Ratings - Page M-23, Graph No. 32

DIMENSIONS PRODUCT NUMBER 88L-74G-01

SIZE

A

B

C

D

E

F

G

H

I

J

K

L

M

10”

8.00

22.38

10.69

12.83

9.56

1.00

10.22

4.596

2.298

2.000

1.375

3/4-10

10.00

REV. 04MAY17 D-84

Customer Service (704) 841-6000

www.apolloflowcontrols.com

“Apollo” Flow Controls

88L-940 SERIES LOW TEMP. CARBON STEEL ASME CLASS 300 FLANGED FULL PORT BALL VALVE - 1/2” THRU 1” FOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3 AND RATED TO -50°F (-46°C). STANDARD MATERIAL LIST

VARIATIONS AVAILABLE

PART (1/2”& 3/4” VALVES) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

Body Retainer Ball Stem Packing Gland Stem Seals Seats Stem Nut Lever Stem Bearing Stop Body Seal Lock Washer Grounding Spring Grounding Spring

ASTM A352-LCC ASTM A352-LCC ASTM A276-316 ASTM A276-316 ASTM A108 Type 1215 PTFE RPTFE 300 Series Stainless Steel 300 Series Stainless Steel w/Vinyl Grip RPTFE 300 Series Stainless Steel RPTFE 300 Series Stainless Steel ASTM A313 Stainless Steel ASTM A313 Stainless Steel

PART (1” VALVES) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18

• 88L-930 Series (Ni-Cu Ball & Stem)

MATERIAL

OPTIONS AVAILABLE: (MORE INFORMATION IN SECTION J)

• Minimum quantities apply • To specify an option, replace the “01” standard suffix with the suffix of the option. • To specify multiple options, replace the “01” suffix with the desired suffixes in the numerical order shown below. NOTE: Not all suffixes can be combined together. (SUFFIX)

-01 -04-10-14-15-21-24-26-

MATERIAL

Body Retainer Ball Stem Packing Gland Stem Seals Seats Gland Screws Gland Plate Stem Nut Lever Stem Bearing Stop Stop Screw Lock Plate Body Seal Lockwasher Grounding Spring

-35-38-49-65-67-69-70-73-76-77-80-82-90-9P-CE-

ASTM A352-LCC ASTM A352-LCC ASTM A276-316 ASTM A276-316 ASTM A108 Type 1215 PTFE RPTFE ASTM A193 B7 302 or 304 SS 316 SS ASTM A366 Steel with Vinyl Grip RPTFE ASTM A108 Type 1215 SAE J429 Grade 2 ASTM A366 Steel RPTFE 302 or 304 SS SS

-EP-KF-TC-TD-UL-

Pressure/Temperature Ratings - Page M-23, Graph No. 32

OPTION

Standard Configuration 2.25” Stem Extension (Carbon Steel, Zinc Plated) SS Lever and Nut Side Vented Ball (Uni-Directional). Not available with plated CS ball. Wheel Handle, Steel UHMWPE Seats Graphite packing, spiral wound graphite body seal, RPTFE bearing (API 607, 6th edition, ISO 10497:2010) Chlorine Service. Vented. Special Cleaning. Assembled dry. (for CS, Hastelloy and Ni-Cu valves. Ball must be Hastelloy or Ni-CU) PTFE Seats and Seals PEEK Seats and Graphite Packing No Lubrication. Assembled Dry. MPTFE Seats and Graphite Packing (Fire Safe) Cleaned For Industrial Gases Drilled and Tapped Purge Port with Plug 4” Extended Bonnet 316 SS Spiral Wound Gaskets w/PTFE Filler Live Loaded (Lever) Live Loaded(Gear, Actuated) Multi-Seal (Super TFE) Flat Face Flanges Double Packed 4” Extended Bonnet Double Packed 4” Extended Bonnet with Monitoring Port CE Marking. See Page D-3 “Product Approvals” for availability. Garlock EVSP Stem Packing w/Spiral Wound Graphite Gasket (Fire Safe by Design) PCTFE Stem Bearing With Test Certificate Tested to API Spec 6D UL Listed

1/2” & 3/4” VALVES

1” VALVE

DIMENSIONS PRODUCT NUMBER 88L-943-01

SIZE

A

B

C

D

E

F

G

H

I

J

K

L

M

WT.

1/2”

0.50

5.50

3.31

3.31

5.11

0.30

1.09

1.38

1.000

0.500

0.375

0.245

10-24

7.0

88L-944-01

3/4”

0.75

6.00

3.56

3.89

5.53

0.36

1.65

1.99

1.392

0.696

0.500

0.287

1/4-20

9.0

88L-945-01

1”

1.00

6.50

3.82

4.62

6.53

0.47

1.62

2.15

1.392

0.696

0.500

0.287

1/4-20

10.5

“Apollo” Flow Controls

REV. 04MAY17 industrial.apollovalves.com

Customer Service (704) 841-6000

D-85

88L-940 SERIES LOW TEMP. CARBON STEEL ASME CLASS 300 FLANGED FULL PORT BALL VALVE - 1.5” THRU 2.5” FOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3 AND RATED TO -50°F (-46°C). STANDARD MATERIAL LIST

VARIATIONS AVAILABLE

PART 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20

• 88L-930 Series (Ni-Cu Ball & Stem)

MATERIAL

Body Retainer Ball Stem Packing Gland Stem Seals Seats Gland Screws Gland Plate Stem Nut Lever Stem Bearing Stop Stop Screw Lock Plate Body Seal Grounding Spring Body Joint Stud Body Joint Nut Lockwasher

ASTM A352-LCC ASTM A352-LCC ASTM A276-316 or A351-CF8M ASTM A276-316 ASTM A108 Type 1215 PTFE RPTFE ASTM A193 B7 302 & 304 SS ASTM A194 Grade 8l ASTM A366 Steel with Vinyl Grip RPTFE ASTM A108 Type 1215 SAE J429 Grade 2 ASTM A366 Steel RPTFE SS ASTM A193 Grade B7 ASTM A194 Grade 2H 302 or ­304 SS

OPTIONS AVAILABLE: (MORE INFORMATION IN SECTION J)

• Minimum quantities apply • To specify an option, replace the “01” standard suffix with the suffix of the option. • To specify multiple options, replace the “01” suffix with the desired suffixes in the numerical order shown below. NOTE: Not all suffixes can be combined together. (SUFFIX)

-01 -04-14-15-21-24-26-35-38-49-59-65-67-69-70-73-76-77-80-82-90-9P-CE-EP-KF-MG-MH-MJ-MK-TC-TD-UL-

ACTUATOR MOUNTING

OPTION

Standard Configuration 2.25” Stem Extension (Carbon Steel, Zinc Plated) (up to 2”) Side Vented Ball (Uni-Directional). Not available with plated CS ball. Wheel Handle, Steel UHMWPE Seats Graphite packing, spiral wound graphite body seal, RPTFE bearing (API 607, 6th edition, ISO 10497:2010) Chlorine Service. Vented. Special Cleaning. Assembled dry. (for CS, Hastelloy and Ni-Cu valves. Ball must be Hastelloy or Ni-CU) PTFE Seats and Seals PEEK Seats and Graphite Packing No Lubrication. Assembled Dry. SS External Trim MPTFE Seats and Graphite Packing (Fire Safe) Cleaned For Industrial Gases Drilled and Tapped Purge Ports with Plugs 4” Extended Bonnet 316 SS Spiral Wound Gaskets w/PTFE Filler Live Loaded (Lever) Live Loaded (Gear, Actuator) Multi-Seal (Super TFE) Flat Face Flanges Double Packed 4” Extended Bonnet Double Packed 4” Extended Bonnet with Monitoring Port CE Marking. See Page D-3 “Product Approvals” for availability. Garlock EVSP Stem Packing w/Spiral Wound Graphite Gasket (Fire Safe by Design) PCTFE Stem Bearing Gear Operator with Standard Handwheel Gear Operator with Standard Handwheel & Locking Device Gear Operator with Oversize Handwheel Gear Operator with Oversize Handwheel & Locking Device With Test Certificate Tested to API Spec 6D UL Listed

Pressure/Temperature Ratings - Page M-23, Graph No. 32

DIMENSIONS PRODUCT NUMBER 88L-947-01

SIZE

A

B

C

D

E

F

G

H

I

J

K

L

M

1.5”

1.50

7.50

3.50

4.62

6.65

0.72

2.41

3.09

1.949

0.974

0.625

0.412

5/16-18

21

88L-948-01

2”

2.00

8.50

4.00

5.61

8.41

0.80

3.31

4.08

1.949

0.974

0.750

0.477

5/16-18

37

88L-949-01

2.5”

2.50

9.50

4.44

6.24

8.41

0.80

3.94

4.71

1.949

0.974

0.750

0.477

5/16-18

57

REV. 04MAY17 D-86

Customer Service (704) 841-6000

www.apolloflowcontrols.com

WT.

“Apollo” Flow Controls

88L-940 SERIES LOW TEMP. CARBON STEEL ASME CLASS 300 FLANGED FULL PORT BALL VALVE - 3” THRU 6” FOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3 AND RATED TO -50°F (-46°C). STANDARD MATERIAL LIST

VARIATIONS AVAILABLE

PART 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20

• 88L-930 Series (Ni-Cu Ball & Stem)

MATERIAL

Body Retainer Ball Stem Packing Gland Stem Seals Seats Gland Screws Gland Plate Adapter Screw Handle Adapter Stem Bearing Stop Stop Screw Lock Plate Body Seal Grounding Spring Body Joint Stud Body Joint Nut Pipe Handle

ASTM A352-LCC ASTM A352-LCC ASTM A276-316 or A351-CF8M ASTM A276-316 ASTM A108 Type 1215 PTFE RPTFE ASTM A193 B7 316 SS 316 SS ASTM A366 Steel with Vinyl Grip RPTFE ASTM A108 Type 1215 SAE J429 Grade 2 ASTM A366 Steel RPTFE SS ASTM A193 Grade B7 ASTM A194 Grade 2H Galvanized Steel (not shown)

OPTIONS AVAILABLE: (MORE INFORMATION IN SECTION J)

• Minimum quantities apply • To specify an option, replace the “01” standard suffix with the suffix of the option. • To specify multiple options, replace the “01” suffix with the desired suffixes in the numerical order shown below. NOTE: Not all suffixes can be combined together. (SUFFIX)

-01 -14-21-24-26-35-38-49-59-65-67-69-70-73-76-77-80-82-90-9P-CE-EP-KF-MG-MH-MJ-MK-TC-TD-UL-

OPTION

Standard Configuration Side Vented Ball (Uni-Directional). Not available with plated CS ball. UHMWPE Seats Graphite packing, spiral wound graphite body seal, RPTFE bearing (API 607, 6th edition, ISO 10497:2010) Chlorine Service. Vented. Special Cleaning. Assembled dry. (for CS, Hastelloy and Ni-Cu valves. Ball must be Hastelloy or Ni-CU) PTFE Seats and Seals PEEK Seats and Graphite Packing No Lubrication. Assembled Dry. SS External Trim MPTFE Seats and Graphite Packing (Fire Safe) Cleaned For Industrial Gases Drilled and Tapped Purge Ports with Plugs 4” Extended Bonnet 316 SS Spiral Wound Gaskets w/PTFE Filler Live Loaded (Lever) Live Loaded (Gear, Actuator) Multi-Seal (Super TFE) Flat Face Flanges Double Packed 4” Extended Bonnet Double Packed 4” Extended Bonnet with Monitoring Port CE Marking. See Page D-3 “Product Approvals” for availability. Garlock EVSP Stem Packing w/Spiral Wound Graphite Gasket (Fire Safe by Design) PCTFE Stem Bearing Gear Operator with Standard Handwheel Gear Operator with Standard Handwheel & Locking Device Gear Operator with Oversize Handwheel Gear Operator with Oversize Handwheel & Locking Device With Test Certificate Tested to API Spec 6D UL Listed

Pressure/Temperature Ratings - Page M-23, Graph No. 32

ACTUATOR MOUNTING

DIMENSIONS PRODUCT NUMBER 88L-940-01

SIZE

A

B

C

D

E

F

G

H

I

J

K

L

M

3”

3.00

11.12

5.24

8.80

4.06

0.50

4.75

5.95

2.840

1.420

1.250

0.725

3/8-16

78

88L-94A-01

4”

4.00

12.00

5.44

9.99

5.25

0.50

5.94

7.13

2.840

1.420

1.250

0.725

3/8-16

133

88L-94C-01

6”

6.00

15.88

6.82

13.73

7.30

1.00

7.75

9.48

4.596

2.296

2.000

1.375

3/4-10

329

“Apollo” Flow Controls

WT.

REV. 04MAY17 industrial.apollovalves.com

Customer Service (704) 841-6000

D-87

88L-940 SERIES LOW TEMP. CARBON STEEL ASME CLASS 300 FLANGED FULL PORT BALL VALVE - 8” THRU 12” FOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3 AND RATED TO -50°F (-46°C). STANDARD MATERIAL LIST

VARIATIONS AVAILABLE

PART 1 2 3 4 5 6 7 8 9 10 11 12 13

• 88L-930 Series (Ni-Cu Ball & Stem)

MATERIAL

Body Retainer Ball Stem Packing Gland Stem Seals Seats Gland Screws Gland Plate Stem Bearing Body Seal Body Joint Stud Body Joint Nut

ASTM A352-LCC ASTM A352-LCC ASTM A351-CF8M ASTM A276-316 ASTM A108 Type 1215 PTFE RPTFE ASTM A193 B7 316 SS RPTFE RPTFE ASTM A193 Grade B7 ASTM A194 Grade 2H

OPTIONS AVAILABLE: (MORE INFORMATION IN SECTION J)

• Minimum quantities apply • To specify an option, replace the “01” standard suffix with the suffix of the option. • To specify multiple options, replace the “01” suffix with the desired suffixes in the numerical order shown below. NOTE: Not all suffixes can be combined together. (SUFFIX)

-01 -14-21-24-26-35-49-65-67-69-70-76-77-80-82-90-9P-CE-EP-KF-MG-MH-MJ-MK-TC-TD-UL-

ACTUATOR MOUNTING

OPTION

Standard Configuration Side Vented Ball (Uni-Directional). Not available with plated CS ball. UHMWPE Seats Graphite packing, spiral wound graphite body seal, RPTFE bearing (API 607, 6th edition, ISO 10497:2010) Chlorine Service. Vented. Special Cleaning. Assembled dry. (for CS, Hastelloy and Ni-Cu valves. Ball must be Hastelloy or Ni-CU) PTFE Seats and Seals No Lubrication. Assembled Dry. MPTFE Seats and Graphite Packing (Fire Safe) Cleaned for Industrial Gas Drilled and Tapped Purge Ports with Plugs 4” Extended Bonnet (8” Only) Live Loaded (Lever) Live Loaded (Gear, Actuator) Multi-Seal (Super TFE) Flat Face Flanges Double Packed 4” Extended Bonnet Double Packed 4” Extended Bonnet with Monitoring Port CE Marking. See Page D-3 “Product Approvals” for availability. Garlock EVSP Stem Packing w/Spiral Wound Graphite Gasket (Fire Safe by Design) PCTFE Stem Bearing Gear Operator with Standard Handwheel Gear Operator with Standard Handwheel & Locking Device Gear Operator with Oversize Handwheel Gear Operator with Oversize Handwheel & Locking Device With Test Certificate Tested to API Spec 6D UL Listed

Pressure/Temperature Ratings - Page M-23, Graph No. 32

10” & 12”

8”

DIMENSIONS PRODUCT NUMBER 88L-94E-01

SIZE

A

B

C

D

E

F

G

8”

8.00

19.75

9.38

12.83

9.56

1.00

10.22

88L-94G-01

10”

10.00

22.38

10.95

18.57

11.33

2.31

12.80

88L-94H-01

12”

12.00

25.50

12.84

20.31

13.40

2.31

14.92

REV. 04MAY17 D-88

Customer Service (704) 841-6000

www.apolloflowcontrols.com

“Apollo” Flow Controls

87A-400 SERIES ALLOY 20 ASME CLASS 150 FLANGED STD. PORT BALL VALVE - 1.5” THRU 2” FOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3 AND RATED TO -50°F (-46°C). STANDARD MATERIAL LIST

OPTIONS AVAILABLE: (MORE INFORMATION IN SECTION J)

PART 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19

• Minimum quantities apply • To specify an option, replace the “01” standard suffix with the suffix of the option. • To specify multiple options, replace the “01” suffix with the desired suffixes in the numerical order shown below. NOTE: Not all suffixes can be combined together.

MATERIAL

Body Retainer Ball Stem Packing Gland Stem Seals Seats Gland Screws Gland Plate Stem Nut Lever Stem Bearing Stop Stop Screw Lock Plate Body Seal Lockwasher Grounding Spring Grounding Spring

ASTM A351 CN7M ASTM B473 (UNS N08020) ASTM B473 (UNS N08020) ASTM B473 (UNS N08020) ASTM A276 Type 316 PTFE RPTFE ASTM A193 B8 Class 1 302 or 304 SS 316 SS 302 or 304 SS with Vinyl Grip RPTFE ASTM A276 Type 316 18-8 SS 302 or 304 SS RPTFE 302 or 304 SS SS Inconel (not shown)

(SUFFIX)

OPTION

-01 -04-14-15-21-24-35-38-49-57-65-69-70-76-77-80-82-90-9P-CE-

Standard Configuration 2.25” Stem Extension (Carbon Steel, Zinc Plated) Side Vented Ball (Uni-Directional) Wheel Handle, Steel UHMWPE Seats Fire Safe (Graphite Packing and Seal) PTFE Seats and Seals PEEK Seats and Graphite Packing No Lubrication. Assembled Dry. Oxygen Cleaned MPTFE Seats and Graphite Packing (Fire Safe) Drilled and Tapped Purge Port with Plug 4” Extended Bonnet Live Loaded (Lever) Live Loaded (Gear, Actuator) Multi-Seal (Super TFE) Flat Face Flanges Double Packed 4” Extended Bonnet Double Packed 4” Extended Bonnet with Monitoring Port CE Marking. See Page D-3 “Product Approvals” for availability. Garlock EVSP Stem Packing w/Spiral Wound Graphite Gasket (Fire Safe by Design) PCTFE Stem Bearing Positive Material Identification With Test Certificate Gear Operator with Standard Handwheel Gear Operator with Standard Handwheel & Locking Device Gear Operator with Oversize Handwheel Gear Operator with Oversize Handwheel & Locking Device Tested to API Spec 6D

-EP-KF-PM-TC-MG-MH-MJ-MK-TD-

Pressure/Temperature Ratings - Page M-16, Graph No. 18

ACTUATOR MOUNTING

DIMENSIONS PRODUCT NUMBER 87A-407-01A 87A-408-01

SIZE

A

B

C

D

E

F

G

H

I

J

K

L

M

N

1.5”

1.00

6.50

3.50

4.85

6.53

0.47

1.85

2.38

1.392

0.696

0.500

0.287

1/4-20

1.50

9

2”

1.50

7.00

3.69

4.62

6.65

0.72

2.41

3.09

1.949

0.974

0.625

0.412

5/16-18

2.00

18

“Apollo” Flow Controls

WT.

REV. 04MAY17 industrial.apollovalves.com

Customer Service (704) 841-6000

D-89

87A-400 SERIES ALLOY 20 ASME CLASS 150 FLANGED STD. PORT BALL VALVE - 3” FOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3. STANDARD MATERIAL LIST

OPTIONS AVAILABLE: (MORE INFORMATION IN SECTION J)

PART 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21

MATERIAL

Body Retainer Ball Stem Packing Gland Stem Seals Seats Gland Screws Gland Plate Stem Nut Lever Stem Bearing Stop Stop Screw Lock Plate Body Seal Grounding Spring Body Joint Stud Body Joint Nut Lockwasher Grounding Spring

ASTM A351 CN7M ASTM A351 CN7M ASTM B473 (UNS N08020) or CN7M ASTM B473 (UNS N08020) ASTM A276 Type 316 PTFE RPTFE ASTM A193 B8 Class 1 316 SS 18-8 SS 316 SS with Vinyl Grip RPTFE ASTM A276 Type 316 316 SS 302 or 304 SS RPTFE SS ASTM A193 Grade B8M ASTM A194 Grade 8 302 or 304 SS Inconel (not shown)

• Minimum quantities apply • To specify an option, replace the “01” standard suffix with the suffix of the option. • To specify multiple options, replace the “01” suffix with the desired suffixes in the numerical order shown below. NOTE: Not all suffixes can be combined together.

(SUFFIX) -01 -04-14-21-24-35-38-49-57-65-69-70-76-77-80-82-90-9P-CE-EP-KF-MG-MH-MJ-MK-MP-TC-TD-

OPTION Standard Configuration 2.25” Stem Extension (Carbon Steel, Zinc Plated) Side Vented Ball (Uni-Directional) UHMWPE Seats Fire Safe (Graphite Packing and Seal) PTFE Seats and Seals PEEK Seats and Graphite Packing No Lubrication. Assembled Dry. Oxygen Cleaned MPTFE Seats and Graphite Packing (Fire Safe) Drilled and Tapped Purge Ports with Plugs 4” Extended Bonnet Live Loaded (Lever) Live Loaded (Gear, Actuator) Multi-Seal (Super TFE) Flat Face Flanges Double Packed 4” Extended Bonnet Double Packed 4” Extended Bonnet with Monitoring Port CE Marking. See Page D-3 “Product Approvals” for availability. Garlock EVSP Stem Packing w/Spiral Wound Graphite Gasket (Fire Safe by Design) PCTFE Stem Bearing Gear Operator with Standard Handwheel Gear Operator with Standard Handwheel & Locking Device Gear Operator with Oversize Handwheel Gear Operator with Oversize Handwheel & Locking Device Positive Material Identification With Test Certificate Tested to API Spec 6D

Pressure/Temperature Ratings - Page M-16, Graph No. 18

ACTUATOR MOUNTING

DIMENSIONS PRODUCT NUMBER 87A-400-01

SIZE

A

B

C

D

E

F

G

H

I

J

K

L

M

N

WT.

3”

2.50

8.00

3.51

6.24

8.41

0.80

3.94

4.71

1.949

0.974

0.750

0.477

5/16-18

3.00

34.3

REV. 04MAY17 D-90

Customer Service (704) 841-6000

www.apolloflowcontrols.com

“Apollo” Flow Controls

87A-400 SERIES ALLOY 20 ASME CLASS 150 FLANGED STD. PORT BALL VALVE - 4” THRU 8” FOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3. STANDARD MATERIAL LIST

OPTIONS AVAILABLE: (MORE INFORMATION IN SECTION J)

PART 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22

MATERIAL

Body Retainer Ball Stem Packing Gland Stem Seals Seats Gland Screws Gland Plate Adapter Screw Handle Adapter Stem Bearing Stop Stop Screw Lock Plate Body Seal Grounding Spring Body Joint Stud Body Joint Nut Adapter Screw Pipe Handle Grounding Spring

ASTM A351 CN7M ASTM A351 CN7M ASTM B473 (UNS N08020) or CN7M ASTM B473 (UNS N08020) ASTM A276 Type 316 PTFE RPTFE ASTM A193 B8 Class 1 316 SS 18-8 SS 316 SS with Vinyl Grip RPTFE ASTM A276 Type 316 316 SS 302 or 304 SS RPTFE SS ASTM A193 Grade B8M ASTM A194 Grade 8 18-8 SS Galvanized Steel (not shown) Inconel (not shown)

• Minimum quantities apply • To specify an option, replace the “01” standard suffix with the suffix of the option. • To specify multiple options, replace the “01” suffix with the desired suffixes in the numerical order shown below. NOTE: Not all suffixes can be combined together. (SUFFIX)

OPTION

-01 -14-21-24-35-49-57-65-69-70-76-77-80-82-90-9P-CE-

Standard Configuration Side Vented Ball (Uni-Directional) UHMWPE Seats Fire Safe (Graphite Packing and Seal) PTFE Seats and Seals No Lubrication. Assembled Dry. Oxygen Cleaned MPTFE Seats and Graphite Packing (Fire Safe) Drilled and Tapped Purge Ports with Plugs 4” Extended Bonnet Live Loaded (Lever) Live Loaded (Gear, Actuator) Multi-Seal (Super TFE) Flat Face Flanges Double Packed 4” Extended Bonnet Double Packed 4” Extended Bonnet with Monitoring Port CE Marking. See Page D-3 “Product Approvals” for availability. Garlock EVSP Stem Packing w/Spiral Wound Graphite Gasket (Fire Safe by Design) PCTFE Stem Bearing Gear Operator with Standard Handwheel Gear Operator with Standard Handwheel & Locking Device Gear Operator with Oversize Handwheel Gear Operator with Oversize Handwheel & Locking Device Positive Material Identification With Test Certificate Tested to API Spec 6D

-EP-KF-MG-MH-MJ-MK-MP-TC-TD-

Pressure/Temperature Ratings - Page M-16, Graph No. 18

ACTUATOR MOUNTING

DIMENSIONS PRODUCT NUMBER 87A-40A-01

SIZE

A

B

C

D

E

F

G

H

I

J

K

L

M

N

WT.

4”

3.00

9.00

4.18

8.80

3.88

0.50

4.75

5.95

2.840

1.420

1.250

0.725

3/8-16

4.00

73

87A-40C-01

6”

4.00

10.50

4.69

9.99

5.13

.50

5.94

7.13

2.840

1.420

1.250

0.725

3/8-16

6.00

117

87A-40E-01

8”

6.00

18.00

9.00

13.73

7.00

1.00

7.75

9.48

4.596

2.298

2.000

1.375

3/4-10

8.00

310

“Apollo” Flow Controls

REV. 04MAY17 industrial.apollovalves.com

Customer Service (704) 841-6000

D-91

87A-500 SERIES ALLOY 20 ASME CLASS 150 FLANGED STD. PORT BALL VALVE - 1/2” THRU 1” FOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3. STANDARD MATERIAL LIST

OPTIONS AVAILABLE: (MORE INFORMATION IN SECTION J)

PART (1/2” & 3/4” VALVES) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19

Body Retainer Ball Stem Packing Gland Stem Seals Seats Stem Nut Lever Stem Bearing Stop Body Seal Lockwasher Grounding Spring Grounding Spring Part (1” Valves) Body Retainer Ball Stem Packing Gland Stem Seals Seats Gland Screws Gland Plate Stem Nut Lever Stem Bearing Stop Stop Screw Lock Plate Body Seal Lockwasher Grounding Spring Grounding Spring

• Minimum quantities apply • To specify an option, replace the “01” standard suffix with the suffix of the option. • To specify multiple options, replace the “01” suffix with the desired suffixes in the numerical order shown below. NOTE: Not all suffixes can be combined together.

MATERIAL

ASTM A351 CN7M ASTM B473 (UNS N08020) ASTM B473 (UNS N08020) ASTM B473 (UNS N08020) ASTM A276 Type 316 PTFE RPTFE 300 Series Stainless Steel 300 Series Stainless Steel w/ Vinyl Grip RPTFE 300 Series Stainless Steel RPTFE 300 Series Stainless Steel ASTM A313 Stainless Steel ASTM A313 Stainless Steel MATERIAL ASTM A351 CN7M ASTM B473 (UNS N08020) ASTM B473 (UNS N08020) ASTM B473 (UNS N08020) ASTM A276 Type 316 PTFE RPTFE ASTM A193 B8 Class 1 302 or 304 SS 316 SS 302 or 304 with Vinyl Grip RPTFE ASTM A276 Type 316 18-8 SS 302 or 304 SS RPTFE 302 or 304 SS SS Inconel (not shown)

(SUFFIX)

OPTION

-01 -04-14-15-21-24-35-38-49-57-65-69-70-73-74-76-77-80-82-90-9P-CE-

Standard Configuration 2.25” Stem Extension (Carbon Steel, Zinc Plated) Side Vented Ball (Uni-Directional) Wheel Handle, Steel UHMWPE Seats Fire Safe (Graphite Packing and Seal) PTFE Seats and Seals PEEK Seats and Graphite Packing No Lubrication. Assembled Dry. Oxygen Cleaned MPTFE Seats and Graphite Packing (Fire Safe) Drilled and Tapped Purge Port with Plugs 4” Extended Bonnet Alloy 20 Spiral Wound Gaskets w/PTFE Filler Alloy 20 Spiral Wound Gaskets w/Graphite Filler Live Loaded (Lever) Live Loaded (Gear, Actuator) Multi-Seal (Super TFE) Flat Face Flanges Double Packed 4” Extended Bonnet Double Packed 4” Extended Bonnet with Monitoring Port CE Marking. See Page D-3 “Product Approvals” for availability. Garlock EVSP Stem Packing w/Spiral Wound Graphite Gasket (Fire Safe by Design) PCTFE Stem Bearing Positive Material Identification With Test Certificate Tested to API Spec 6D

-EP-KF-MP-TC-TD-

Pressure/Temperature Ratings - Page M-16, Graph No. 18

1/2” & 3/4” VALVES

1” VALVE

DIMENSIONS PRODUCT NUMBER 87A-503-01

SIZE

A

B

C

D

E

F

G

H

I

J

K

L

M

1/2”

0.50

4.25

2.06

3.31

5.11

0.30

1.09

1.41

1.000

0.500

0.375

0.245

10-24

5

87A-504-01

3/4”

0.75

4.62

2.18

3.89

5.53

0.36

1.65

1.99

1.392

0.696

0.500

0.287

1/4-20

6

87A-505-01

1”

1.00

5.00

2.32

4.62

6.53

0.47

1.62

2.15

1.392

0.696

0.500

0.287

1/4-20

7

REV. 04MAY17 D-92

Customer Service (704) 841-6000

www.apolloflowcontrols.com

WT.

“Apollo” Flow Controls

87A-500 SERIES ALLOY 20 ASME CLASS 150 FLANGED FULL PORT BALL VALVE - 1.5” THRU 2.5” FOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3. STANDARD MATERIAL LIST

OPTIONS AVAILABLE: (MORE INFORMATION IN SECTION J)

PART 2

Body Retainer

3

Ball

4

Stem Packing Gland Stem Seals Seats Gland Screws Gland Plate Adapter Screw Lever Stem Bearing Stop Stop Screw Lock Plate Body Seal Grounding Spring Body Joint Stud Body Joint Nut Lockwasher Grounding Spring

1

5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21

• Minimum quantities apply • To specify an option, replace the “01” standard suffix with the suffix of the option. • To specify multiple options, replace the “01” suffix with the desired suffixes in the numerical order shown below. NOTE: Not all suffixes can be combined together.

MATERIAL

ASTM A351 CN7M ASTM A351 CN7M ASTM B473 (UNS N08020) or A351 CN7M ASTM B473 (UNS N08020) ASTM A276 Type 316 PTFE RPTFE ASTM A193 B8 Class 1 316 SS 18-8 SS 316 SS RPTFE ASTM A276 Type 316 316 SS 302 or 304 SS RPTFE SS ASTM A193 Grade B8M ASTM A194 Grade 8 302 or 304 SS Inconel (not shown)

(SUFFIX)

OPTION

-01 -04-14-21-24-35-38-49-57-65-69-70-73-74-76-77-80-82-90-9P-CE-

Standard Configuration 2.25” Stem Extension (Carbon Steel, Zinc Plated) Side Vented Ball (Uni-Directional) UHMWPE Seats Fire Safe (Graphite Packing and Seal) PTFE Seats and Seals PEEK Seats and Graphite Packing (3” Only) No Lubrication. Assembled Dry. Oxygen Cleaned MPTFE Seats and Graphite Packing (Fire Safe) Drilled and Tapped Purge Ports with Plugs 4” Extended Bonnet Alloy 20 Spiral Wound Gaskets w/PTFE Filler Alloy 20 Spiral Wound Gaskets w/Graphite Filler Live Loaded (Lever) Live Loaded (Gear, Actuator) Multi-Seal (Super TFE) Flat Face Flanges Double Packed 4” Extended Bonnet Double Packed 4” Extended Bonnet with Monitoring Port CE Marking. See Page D-3 “Product Approvals” for availability. Garlock EVSP Stem Packing w/Spiral Wound Graphite Gasket (Fire Safe by Design) PCTFE Stem Bearing Gear Operator with Standard Handwheel Gear Operator with Standard Handwheel & Locking Device Gear Operator with Oversize Handwheel Gear Operator with Oversize Handwheel & Locking Device Positive Material Identification With Test Certificate Tested to API Spec 6D

-EP-KF-MG-MH-MJ-MK-MP-TC-TD-

Pressure/Temperature Ratings - Page M-16, Graph No. 18

ACTUATOR MOUNTING

DIMENSIONS PRODUCT NUMBER 87A-507-01

SIZE

A

B

C

D

E

F

G

H

I

J

K

L

M

1.5”

1.50

6.50

3.00

4.62

6.65

0.72

2.41

3.09

1.949

0.974

0.625

0.412

5/16-18

14

87A-508-01

2”

2.00

7.00

3.04

5.61

8.41

0.80

3.31

4.08

1.949

0.974

0.750

0.477

5/16-18

25

87A-509-01

2.5”

2.50

7.50

3.34

6.24

8.41

0.80

3.94

4.71

1.949

0.974

0.750

0.477

5/16-18

30

“Apollo” Flow Controls

WT.

REV. 04MAY17 industrial.apollovalves.com

Customer Service (704) 841-6000

D-93

87A-500 SERIES ALLOY 20 ASME CLASS 150 FLANGED FULL PORT BALL VALVE - 3” THRU 6” FOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3. STANDARD MATERIAL LIST

OPTIONS AVAILABLE: (MORE INFORMATION IN SECTION J)

PART 2

Body Retainer

3

Ball

4

Stem Packing Gland Stem Seals Seats Gland Screws Gland Plate Adapter Screw Handle Adapter Stem Bearing Stop Stop Screw Lock Plate Body Seal Grounding Spring Body Joint Stud Body Joint Nut Pipe Handle Grounding Spring

1

5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21

• Minimum quantities apply • To specify an option, replace the “01” standard suffix with the suffix of the option. • To specify multiple options, replace the “01” suffix with the desired suffixes in the numerical order shown below. NOTE: Not all suffixes can be combined together.

MATERIAL

ASTM A351 CN7M ASTM A351 CN7M ASTM B473 (UNS N08020 or A351 CN7M) ASTM B473 (UNS N08020) ASTM A276 Type 316 PTFE RPTFE ASTM A193 B8 Class 1 316 SS 18-8 SS 316 with Vinyl Grip RPTFE ASTM A276 Type 316 316 SS 302 or 304 SS RPTFE SS ASTM A193 Grade B8M ASTM A194 Grade 8 Galvanized Steel (not shown) Inconel (not shown)

(SUFFIX) -01 -14-21-24-35-38-49-57-65-69-70-73-74-76-77-80-82-90-9P-CE-EP-KF-MG-MH-MJ-MK-MP-TC-TD-

OPTION Standard Configuration Side Vented Ball (Uni-Directional) UHMWPE Seats Fire Safe (Graphite Packing and Seal) PTFE Seats and Seals PEEK Seats and Graphite Packing No Lubrication. Assembled Dry. Oxygen Cleaned MPTFE Seats and Graphite Packing (Fire Safe) Drilled and Tapped Purge Ports with Plugs Extended Bonnet Alloy 20 Spiral Wound Gaskets w/PTFE Filler Alloy 20 Spiral Wound Gaskets w/Graphite Filler Live Loaded (Lever) Live Loaded (Gear, Actuator) Multi-Seal (Super TFE) Flat Face Flanges Double Packed 4” Extended Bonnet Double Packed 4” Extended Bonnet with Monitoring Port CE Marking. See Page D-3 “Product Approvals” for availability. Garlock EVSP Stem Packing w/Spiral Wound Graphite Gasket (Fire Safe by Design) PCTFE Stem Bearing Gear Operator with Standard Handwheel Gear Operator with Standard Handwheel & Locking Device Gear Operator with Oversize Handwheel Gear Operator with Oversize Handwheel & Locking Device Positive Material Identification With Test Certificate Tested to API Spec 6D

Pressure/Temperature Ratings - Page M-16, Graph No. 18

ACTUATOR MOUNTING

DIMENSIONS PRODUCT NUMBER 87A-500-01

SIZE

A

B

C

D

E

F

G

H

I

J

L

M

WT. 60

3”

3.00

8.00

3.68

8.80

3.88

0.50

4.75

5.95

2.840

1.420

1.250

0.725

3/8-16

87A-50A-01

4”

4.00

9.00

3.94

9.99

5.13

0.50

5.94

7.13

2.840

1.420

1.250

0.725

3/8-16

91

87A-50C-01

6”

6.00

15.50

7.19

13.73

7.00

1.00

7.75

9.48

4.596

2.298

2.000

1.375

3/4-10

248

REV. 04MAY17 D-94

K

Customer Service (704) 841-6000

www.apolloflowcontrols.com

“Apollo” Flow Controls

87A-F00 SERIES STAINLESS STEEL ASME CLASS 600 FLANGED FULL PORT BALL VALVE - 1” FOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3. STANDARD MATERIAL LIST

OPTIONS AVAILABLE: (MORE INFORMATION IN SECTION J)

PART

3

Ball

4

Stem

5

Seats

6

Body Seal Stem Seals Stem Bearing Grounding Spring Grounding Spring Packing Gland Stem Screw Lever & Grip Gland Plate Stops Lock Plate Spacer Stop Screws Gland Plate Screws

7 8 9 10 11 12 13 14 15 16 17 18

F

STEM FLATS

19

ASTM A351-CF8M ASTM A276 Type 316 ASTM A351-CF8M or ASTM A276 Type 316 ASTM A276 Type 316 Defined by Seat Suffix Selected See “95” or “80” also “38” & “21” Defined by Seat Suffix Selected Defined by Seat Suffix Selected Defined by Seat Suffix Selected 316 Stainless Steel 316 Stainless Steel ASTM A276 Type 316 Steel Zinc Plated 316 Stainless Steel w/Vinyl Grip 316 Stainless Steel ASTM A276 Type 316 302 or 304 Stainless Steel ASTM A276 type 316 316 Stainless Steel ASTM A193-B8

16

18

12

-38-45-49-57-69-70-76-77-80-82-90-95-9P-CE-

-KB-MG-MH-MJ-MK-MP-PH-TC-TD-TR-TW-

13 1

10

A

G

H

-24-

2

M

STEM FLATS

6 5

4

3

UNTING

STEM FLATS

C

F

ØL STEM

12

9 11 7

17 14 8

J

13 1

2 10

A

K

G

H

N SQUARE

16

15

19

M

STEM FLATS

6 5

4

3

ACTUATOR MOUNTING

DIMENSIONS PRODUCT NUMBER 87A-F05-XX

E

18 Pressure/Temperature Ratings - Page M-25, Graph No. 34 B

ACTUATOR MOUNTING

2.25” Stem Extension (Carbon Steel, Zinc Plated) (1” - 2”) Side vented ball (uni-directional) UHMWPE seats, graphite packing, spiral wound graphite body seal, PEEK bearing Graphite packing, spiral wound graphite body seal, RPTFE bearing (API 607, 6th edition, ISO 10497:2010) PEEK seats, graphite packing, spiral wound graphite body seal, PEEK bearing Less lever and nut (bare stem) No Lubrication. Assembled Dry. Oxygen cleaned Drilled & tapped purge port with plugs 4" extended bonnet Live loaded (lever operated) Live loaded (gear operator or actuator) Multiseal seats, PTFE chevron packing, spiral wound PTFE body seal, PEEK bearing Flat Face Flanges Double Packed 4” Extended Bonnet Devlon® seats, graphite packing, spiral wound graphite body seal, PEEK bearing Double Packed 4” Extended Bonnet with Monitoring Port CE Marking. See Page D-3 “Product Approvals” for availability. Garlock EVSP Stem Packing w/Spiral Wound Graphite Gasket (Fire Safe by Design) Kolsterised ball Gear operator with standard handwheel Gear operator with standard handwheel & locking device Gear operator with oversize handwheel Gear operator with oversize handwheel & locking device Positive material indentification 17-4 PH stem Hydrostatic test with certified report API 6D Test (hydrostatic testing) Hydrostatic test with certified report & MTR Hydrostatic test with certified report & witnessed

-EP-

9 11 7

17 14 8

OPTION

-04-14-21-

E

15 ØL STEM

(SUFFIX)

D

Body Retainer

1

D

2

• Complete the product number by adding a suffix (or multiple suffixes) to the base product number. A suffix for seat & seal materials must be selected. • To specify multiple options, add the desired suffixes in the numerical order shown below. NOTE: Not all suffixes can be combined together. • Minimum quantities may apply.

MATERIAL

C SIZE

A

B

C

D

E

F

G

H

J

1”

1.00

8.50

5.13

3.99

6.65

0.45

1.730

2.460

0.98

“Apollo” Flow Controls

B

K

L

M

N

WT.

1.95

0.625

0.412

5/16-18

13.0

REV. 04MAY17 industrial.apollovalves.com

Customer Service (704) 841-6000

D-95

87A-F00 SERIES STAINLESS STEEL ASME CLASS 600 FLANGED FULL PORT BALL VALVE - 1.5” THRU 2.5” FOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3. STANDARD MATERIAL LIST

OPTIONS AVAILABLE: (MORE INFORMATION IN SECTION J)

Body Retainer

3

Ball

1

4

Stem

5

Seats

6

Body Seal Stem Seals Stem Bearing Grounding Spring Grounding Spring Packing Gland Stem Nut Lever & Grip Gland Plate Stops Lock Plate Stop Screws Gland Plate Screws Body Joint Stud Body Joint Nut Lock Washer

7 8 9 10 11 12 13 14 15 16 17 18 19 20

(SUFFIX)

-04-14-21-24-38-45-49-57-69-70-76-77-80-82-90-95-9P-CE-EP-

F

STEM FLATS

21

ASTM A351-CF8M ASTM A351-CF8M ASTM A351-CF8M or ASTM A276 Type 316 ASTM A276 Type 316 Defined by Seat Suffix Selected See “95” or “80” also “38” & “21” Defined by Seat Suffix Selected Defined by Seat Suffix Selected Defined by Seat Suffix Selected 316 Stainless Steel 316 Stainless Steel ASTM A276 Type 316 ASTM A194 Grade 8 316 Stainless Steel w/Vinyl Grip 316 Stainless Steel ASTM A276 Type 316 302 or 304 Stainless Steel 18-8 Stainless Steel ASTM A193-B8 ASTM A193-B8 Grade B8M ASTM A194-Grade 8 302 or 304 Stainless Steel

9 11

14

13

7

2

10

8

M

A

STEM FLATS

G

H

4

15

-KB-MG-MH-MJ-MK-MP-PH-TC-TD-TR-TW-

D

ØL STEM

12

21

16

17

5

1

3

R MOUNTING

6

C

20

OPTION

2.25” Stem Extension (Carbon Steel, Zinc Plated) (1” - 2”) Side vented ball (uni-directional) UHMWPE seats, graphite packing, spiral wound graphite body seal, PEEK bearing Graphite packing, spiral wound graphite body seal, RPTFE bearing (API 607, 6th edition, ISO 10497:2010) PEEK seats, graphite packing, spiral wound graphite body seal, PEEK bearing Less lever and nut (bare stem) No Lubrication. Assembled Dry. Oxygen cleaned Drilled & tapped purge port with plugs 4" extended bonnet Live loaded (lever operated) Live loaded (gear operator or actuator) Multiseal seats, PTFE chevron packing, spiral wound PTFE body seal, PEEK bearing Flat Face Flanges Double Packed 4” Extended Bonnet Devlon® seats, graphite packing, spiral wound graphite body seal, PEEK bearing Double Packed 4” Extended Bonnet with Monitoring Port CE Marking. See Page D-3 “Product Approvals” for availability. Garlock EVSP Stem Packing w/Spiral Wound Graphite Gasket (Fire Safe by Design) Kolsterised ball Gear operator with standard handwheel Gear operator with standard handwheel & locking device Gear operator with oversize handwheel Gear operator with oversize handwheel & locking device Positive material indentification 17-4 PH stem Hydrostatic test with certified report API 6D Test (hydrostatic testing) Hydrostatic test with certified report & MTR Hydrostatic test with certified report & witnessed F

2

• Complete the product number by adding a suffix (or multiple suffixes) to the base product number. A suffix for seat & seal materials must be selected. • To specify multiple options, add the desired suffixes in the numerical order shown below. NOTE: Not all suffixes can be combined together. • Minimum quantities may apply.

MATERIAL

STEM FLATS

PART

Pressure/Temperature Ratings Page M-25, Graph Nos. 34 & 35

19

ACTUATOR MOUNTING

18

ØL STEM

N

14 4

M J

DIMENSIONS PRODUCT NUMBER 87A-F07-XX

A

B

C

D

E

F

G

H

J

MOUNTING KACTUATOR L M N

1.5”

1.50

9.50

3.62

5.03

8.40

0.74

2.730

3.500

0.98

1.95

0.750

0.477

5/16-18

31.5

2”

2.00

11.50

5.49

6.06

12.06

0.84

3.490

4.370

1.42

2.84

1.000

0.620

3/8-16

53.0

87A-F09-XX

2.5”

2.50

13.00

6.02

6.63

12.06

0.84

4.190

5.070

1.42

2.84

1.000

0.620

3/8-16

65.0

REV. 04MAY17 Customer Service (704) 841-6000

www.apolloflowcontrols.com

3

WT.

87A-F08-XX

D-96

5

1 SIZE

8

A

STEM FLATS

K

SQUARE

G

H

B

21

16

“Apollo” Flow Controls

C

87A-F00 SERIES STAINLESS STEEL ASME CLASS 600 FLANGED FULL PORT BALL VALVE - 3” THRU 4” FOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3. STANDARD MATERIAL LIST

OPTIONS AVAILABLE: (MORE INFORMATION IN SECTION J)

PART

Body Retainer

3

Ball

1

4

Stem

5

Seats

6

Body Seal Stem Seals Stem Bearing Grounding Spring Grounding Spring Packing Gland Stem Screw Handle Adapter Pipe Handle Gland Plate Stops Lock Plate Stop Screws Gland Plate Screws Body Joint Stud Body Joint Nut Adapter Screw

7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22

ASTM A351-CF8M ASTM A351-CF8M ASTM A351-CF8M or ASTM A276 Type 316 ASTM A276 Type 316 Defined by Seat Suffix Selected See “95” or “80” also “38” & “21” Defined by Seat Suffix Selected Defined by Seat Suffix Selected Defined by Seat Suffix Selected 316 Stainless Steel 316 Stainless Steel ASTM A276 Type 316 304 Stainless Steel 316 Stainless Steel Galvanized Steel ASTM A351-CF8M ASTM A276 Type 316 302 or 304 Stainless Steel 18-8 Stainless Steel ASTM A193-B8 ASTM A193-B8M ASTM A194 Grade 8 18-8 Stainless Steel E 18

12

17

STEM FLATS

-24-38-45-49-57-69-70-76-77-80-82-90-95-9P-CE-EP-KB-MG-MH-MJ-MK-MP-PH-TC-TD-TR-TW-

9 11 7

4 8

13

14

16 10

2

A

F

G

H

NTING

OPTION

Side vented ball (uni-directional) UHMWPE seats, graphite packing, spiral wound graphite body seal, PEEK bearing Graphite packing, spiral wound graphite body seal, RPTFE bearing (API 607, 6th edition, ISO 10497:2010) PEEK seats, graphite packing, spiral wound graphite body seal, PEEK bearing Less lever and nut (bare stem) No Lubrication. Assembled Dry. Oxygen cleaned Drilled & tapped purge port with plugs 4" extended bonnet Live loaded (lever operated) Live loaded (gear operator or actuator) Multiseal seats, PTFE chevron packing, spiral wound PTFE body seal, PEEK bearing Flat Face Flanges Double Packed 4” Extended Bonnet Devlon® seats, graphite packing, spiral wound graphite body seal, PEEK bearing Double Packed 4” Extended Bonnet with Monitoring Port CE Marking. See Page D-3 “Product Approvals” for availability. Garlock EVSP Stem Packing w/Spiral Wound Graphite Gasket (Fire Safe by Design) Kolsterised ball Gear operator with standard handwheel Gear operator with standard handwheel & locking device Gear operator with oversize handwheel Gear operator with oversize handwheel & locking device Positive material indentification 17-4 PH stem Hydrostatic test with certified report API 6D Test (hydrostatic testing) Hydrostatic test with certified report & MTR Hydrostatic test with certified report & witnessed

Pressure/Temperature Ratings - Page M-25, Graph No. 35

21

ØL STEM

N

STEM FLATS

M

K

SQUARE

B

A

F

C

20

STEM FLATS

6

19

G

3

17

ACTUATOR MOUNTING

H

5

1

J

M

STEM FLATS

-14-21-

22

ØL STEM 15

(SUFFIX)

D

2

• Complete the product number by adding a suffix (or multiple suffixes) to the base product number. A suffix for seat & seal materials must be selected. • To specify multiple options, add the desired suffixes in the numerical order shown below. NOTE: Not all suffixes can be combined together. • Minimum quantities may apply.

MATERIAL

ACTUATOR MOUNTING

DIMENSIONS PRODUCT NUMBER 87A-F00-XX 87A-F0A-XX

1 SIZE

A

B

C

3”

3.00

14.00

7.00

4”

4.00

17.00

7.19

“Apollo” Flow Controls

D

E

F

G

H

J

K

8.55

18.00

11.20

34.00

0.50

4.750

5.946

1.42

2.84

0.75

6.630

8.081

1.74

3.48

L

M

N

WT.

1.250

0.725

3/8-16

101.0

1.500

0.780

1/2-13

194.0

REV. 04MAY17 industrial.apollovalves.com

Customer Service (704) 841-6000

D-97

87A-F00 SERIES STAINLESS STEEL ASME CLASS 600 FLANGED FULL PORT BALL VALVE - 6” FOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3. STANDARD MATERIAL LIST

OPTIONS AVAILABLE: (MORE INFORMATION IN SECTION J)

PART

Body Retainer

3

Ball

1

4

Stem

5

Seats

6

Body Seal Stem Seals Stem Bearing Grounding Spring Grounding Spring Packing Gland Stem Screw Handle Adapter Pipe Handle Gland Plate Stops Lock Plate Stop Screws Gland Plate Screws Body Joint Stud Body Joint Nut Adapter Screw

7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22

ØL STEM

22

STEM FLATS

-14-21-24-38-45-49-57-69-70-76-77-80-82-90-95-9P-CE-EP-KB-MG-MH-MJ-MK-MP-PH-TC-TD-TR-TW-

18 16 9 11 7

8

14

2

F

4

A

G

10

(SUFFIX)

12

15

H

OPTION

Side vented ball (uni-directional) UHMWPE seats, graphite packing, spiral wound graphite body seal, PEEK bearing Graphite packing, spiral wound graphite body seal, RPTFE bearing (API 607, 6th edition, ISO 10497:2010) PEEK seats, graphite packing, spiral wound graphite body seal, PEEK bearing Less lever and nut (bare stem) No Lubrication. Assembled Dry. Oxygen cleaned Drilled & tapped purge port with plugs 4" extended bonnet Live loaded (lever operated) Live loaded (gear operator or actuator) Multiseal seats, PTFE chevron packing, spiral wound PTFE body seal, PEEK bearing Flat Face Flanges Double Packed 4” Extended Bonnet Devlon® seats, graphite packing, spiral wound graphite body seal, PEEK bearing Double Packed 4” Extended Bonnet with Monitoring Port CE Marking. See Page D-3 “Product Approvals” for availability. Garlock EVSP Stem Packing w/Spiral Wound Graphite Gasket (Fire Safe by Design) Kolsterised ball Gear operator with standard handwheel Gear operator with standard handwheel & locking device Gear operator with oversize handwheel Gear operator with oversize handwheel & locking device Positive material indentification 17-4 PH stem Hydrostatic test with certified report API 6D Test (hydrostatic testing) Hydrostatic test with certified report & MTR Hydrostatic test with certified report & witnessed

Pressure/Temperature Ratings - Page M-26, Graph No. 36

M

K

B

10

F

20 SQUARE

21

ØL STEM STEM FLATS

6

C

17

STEM FLATS

3

19 N

H

ACTUATOR MOUNTING

5

1

G

NTING

J

M

E

13

17

STEM FLATS

ASTM A351-CF8M ASTM A351-CF8M ASTM A351-CF8M or ASTM A276 Type 316 ASTM A276 Type 316 Defined by Seat Suffix Selected See “95” or “80” also “38” & “21” Defined by Seat Suffix Selected Defined by Seat Suffix Selected Defined by Seat Suffix Selected 316 Stainless Steel 316 Stainless Steel ASTM A276 Type 316 304 Stainless Steel 316 Stainless Steel Galvanized Steel 316 Stainless Steel ASTM A276 Type 316 302 or 304 Stainless Steel 316 Stainless Steel ASTM A193-B8 ASTM A193-B8M ASTM A194 Grade 8 18-8 Stainless Steel

D

2

• Complete the product number by adding a suffix (or multiple suffixes) to the base product number. A suffix for seat & seal materials must be selected. • To specify multiple options, add the desired suffixes in the numerical order shown below. NOTE: Not all suffixes can be combined together. • Minimum quantities may apply.

MATERIAL

ACTUATOR MOUNTING 1

DIMENSIONS PRODUCT NUMBER 87A-F0C-XX

C SIZE

A

B

C

D

E

F

G

H

J

K

L

M

N

WT.

6”

6.00

22.00

9.94

14.17

45.00

1.00

8.190

9.915

2.298

4.59

2.00

1.375

3/4-10

500.0

REV. 04MAY17 D-98

5

Customer Service (704) 841-6000

www.apolloflowcontrols.com

“Apollo” Flow Controls

87A-F00 SERIES STAINLESS STEEL ASME CLASS 600 FLANGED FULL PORT BALL VALVE - 8” FOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3. STANDARD MATERIAL LIST

OPTIONS AVAILABLE: (MORE INFORMATION IN SECTION J)

Ball

4

Stem

5

Seats

6

Body Seal Stem Seals Stem Bearing Grounding Spring Grounding Spring Packing Gland Gland Plate Gland Plate Screws Body Joint Stud Body Joint Nut

7 8 9 10 11 12 13 14

H

15

11

M

4 9

-24-38-45-49-57-69-70-76-77-80-82-90-95-9P-CE-

10

E

-KB-MG-MH-MJ-MK-MP-PH-TC-TD-TR-TW-

A

G ±.001

1

5

TING

2

14

3 6

C

15

4

H

B

ACTUATOR MOUNTING

13

Pressure/Temperature Ratings - Page M-26, Graph No. 36 9 11

M ØL

7 8

10

E

45°

12

22.5°

A

ØK STEM

OPTION

Side vented ball (uni-directional) UHMWPE seats, graphite packing, spiral wound graphite body seal, PEEK bearing Graphite packing, spiral wound graphite body seal, RPTFE bearing (API 607, 6th edition, ISO 10497:2010) PEEK seats, graphite packing, spiral wound graphite body seal, PEEK bearing Less lever and nut (bare stem) No Lubrication. Assembled Dry. Oxygen cleaned Drilled & tapped purge port with plugs 4" extended bonnet Live loaded (lever operated) Live loaded (gear operator or actuator) Multiseal seats, PTFE chevron packing, spiral wound PTFE body seal, PEEK bearing Flat Face Flanges Double Packed 4” Extended Bonnet Devlon® seats, graphite packing, spiral wound graphite body seal, PEEK bearing Double Packed 4” Extended Bonnet with Monitoring Port CE Marking. See Page D-3 “Product Approvals” for availability. Garlock EVSP Stem Packing w/Spiral Wound Graphite Gasket (Fire Safe by Design) Kolsterised ball Gear operator with standard handwheel Gear operator with standard handwheel & locking device Gear operator with oversize handwheel Gear operator with oversize handwheel & locking device Positive material indentification 17-4 PH stem Hydrostatic test with certified report API 6D Test (hydrostatic testing) Hydrostatic test with certified report & MTR Hydrostatic test with certified report & witnessed

-EP-

7 8

D

-14-21-

D

+.000 -.015

ØL

12

(SUFFIX)

F

3

ASTM A351-CF8M ASTM A351-CF8M ASTM A351-CF8M or ASTM A276 Type 316 ASTM A276 Type 316 Defined by Seat Suffix Selected See “95” or “80” also “38” & “21” Defined by Seat Suffix Selected Defined by Seat Suffix Selected Defined by Seat Suffix Selected 316 Stainless Steel 316 Stainless Steel ASTM A276 Type 316 316 Stainless Steel ASTM A193-B8 ASTM A193 Grade B8M ASTM A194 Grade 8

F

Body Retainer

1

KEYSEAT DEPTH

2

• Complete the product number by adding a suffix (or multiple suffixes) to the base product number. A suffix for seat & seal materials must be selected. • To specify multiple options, add the desired suffixes in the numerical order shown below. NOTE: Not all suffixes can be combined together. • Minimum quantities may apply.

MATERIAL

KEYSEAT DEPTH

PART

G ±.001 ØK STEM

+.000

J -.015

5

ACTUATOR MOUNTING

DIMENSIONS PRODUCT NUMBER 87A-F0E-XX

1

3 6

C

SIZE

A

B

C

D

E

F

G

H

8”

8.00

26.00

11.20

17.77

12.00

2.25*

0.627

5.77

2

14

J B 2.133

15

K

L

M

WT.

2.49

10.00

5/8-11

920.0

* Keyway Length

“Apollo” Flow Controls

REV. 04MAY17 industrial.apollovalves.com

Customer Service (704) 841-6000

D-99

88A-F00 SERIES CARBON STEEL ASME CLASS 600 FLANGED FULL PORT BALL VALVE - 1” FOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3. STANDARD MATERIAL LIST

VARIATIONS AVAILABLE

PART

Seats

6

Body Seal Stem Seals Stem Bearing Grounding Spring Grounding Spring Packing Gland Stem Screw Lever & Grip Gland Plate Stops Lock Plate Spacer Stop Screws Gland Plate Screws

3

7 8 9 10 11 12 13 14 15 16 17 18

18

F

STEM FLATS

19

12

16

-04-14-21-

1

M

STEM FLATS

6 4

C

ACTUATOR MOUNTING

F

B

19

9 - Page M-25, Graph No. 34 Pressure/Temperature Ratings 17

ØL STEM

14

11 7

8

2

J

M

STEM FLATS

6 5

DIMENSIONS

C

B

SIZE

A

B

C

D

E

F

G

H

J

1”

1.00

8.50

5.13

3.99

6.65

0.45

1.730

2.460

0.98

REV. 04MAY17 D-100

Customer Service (704) 841-6000

4

3

ACTUATOR MOUNTING PRODUCT NUMBER 88A-F05-XX

1

10

A

K

G

H

N SQUARE

STEM FLATS

3

OUNTING

Chlorine Service. Vented. Special Cleaning. Assembled dry. (for CS, Hastelloy and Ni-Cu valves. Ball must be Hastelloy or Ni-CU) -38PEEK seats, graphite packing, spiral wound graphite body seal, PEEK bearing -45Less lever and nut (bare stem) -49No Lubrication. Assembled Dry. -67Cleaned for industrial gas (CS only) -69Drilled & tapped purge port with plugs -704" extended bonnet -76Live loaded (lever operated) -77Live loaded (gear operator or actuator) -80Multiseal seats, PTFE chevron packing, spiral wound PTFE body seal, PEEK bearing -82Flat Face Flanges -90Double Packed 4” Extended Bonnet -95Devlon® seats, graphite packing, spiral wound graphite body seal, PEEK bearing -9PDouble Packed 4” Extended Bonnet with Monitoring Port -CECE Marking. See Page D-3 “Product Approvals” for availability. Garlock EVSP Stem Packing w/Spiral Wound -EPGraphite Gasket (Fire Safe by Design) -KBKolsterised ball -MGGear operator with standard handwheel -MHGear operator with standard handwheel & locking device -MJGear operator with oversize handwheel -MKGear operator with oversize handwheel & locking device -PH17-4 PH stem -TCHydrostatic test with certified report E -TDAPI 6D Test (hydrostatic testing) 18 -TR- 16 Hydrostatic test with certified report & MTR 12 -TWHydrostatic test with certified report & witnessed 13 15 -26-

10

5

OPTION

2.25” Stem Extension (Carbon Steel, Zinc Plated) (1” - 2”) Side Vented Ball (Uni-Directional). Not available with plated CS ball. UHMWPE seats, graphite packing, spiral wound graphite body seal, PEEK bearing Graphite packing, spiral wound graphite body seal, RPTFE bearing (API 607, 6th edition, ISO 10497:2010)

-24-

2

A

G

H

(SUFFIX)

13

9 11 7

17 14 8

• Complete the product number by adding a suffix (or multiple suffixes) to the base product number. A suffix for seat & seal materials must be selected. • To specify multiple options, add the desired suffixes in the numerical order shown below. NOTE: Not all suffixes can be combined together. • Minimum quantities may apply.

E

15 ØL STEM

OPTIONS AVAILABLE: (MORE INFORMATION IN SECTION J)

D

5

2

ASTM A216-WCB ASTM A108 Type 1018 ASTM A108 Type 1215 Chrome Plated ASTM A108 Type 1215 Defined by Seat Suffix Selected See “95” or “80” also “38” & “21” Defined by Seat Suffix Selected Defined by Seat Suffix Selected Defined by Seat Suffix Selected 316 Stainless Steel 316 Stainless Steel ASTM A108 Type 1215 Steel Zinc Plated ASTM A366 Steel w/Vinyl Grip 302 or 304 Stainless Steel ASTM A108 Type 1215 ASTM A366 Steel ASTM A276 Type 316 SAE J429 Grade 2 Steel Zinc Plated ASTM A193-B7

D

4

Body Retainer Ball Stem

1

• 88A-F40 Series (316 SS Ball & Stem)

MATERIAL

www.apolloflowcontrols.com

K

L

M

N

WT.

1.95

0.625

0.412

5/16-18

13.0

“Apollo” Flow Controls

88A-F00 SERIES CARBON STEEL ASME CLASS 600 FLANGED FULL PORT BALL VALVE - 1.5” THRU 2.5” FOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3. STANDARD MATERIAL LIST

VARIATIONS AVAILABLE

PART 2

Body Retainer

3

Ball

4

Stem

5

Seats

6

Body Seal Stem Seals Stem Bearing Grounding Spring Grounding Spring Packing Gland Stem Nut Lever & Grip Gland Plate Stops Lock Plate Stop Screws Gland Plate Screws Body Joint Stud Body Joint Nut Lock Washer

7 8 9 10 11 12 13 14 15 16 17 18 19 20

(SUFFIX)

-24-

F

-38-45-49-67-69-70-76-77-80-82-90-95-9P-CE-

A

M

19

20

F

B 18

ØL STEM

4

J

M

A

STEM FLATS

K

SQUARE

PRODUCT NUMBER 88A-F07-XX

5

1

DIMENSIONS SIZE

ACTUATOR MOUNTING A B C

15 13 9 Pressure/Temperature Ratings 11 Page M-25, Graph Nos. 34 & 35 7 2 10

8

G

N

D

3

E

F

C

G 2.730

H

1.5”

1.50

9.50

3.62

5.03

8.40

0.74

88A-F08-XX

2”

2.00

11.50

5.49

6.06

12.06

0.84

3.490

B

88A-F09-XX

2.5”

2.50

13.00

6.02

6.63

12.06

0.84

4.190

“Apollo” Flow Controls

12

14

H

ACTUATOR MOUNTING

21

16

-KB-MG-MH-MJ-MK-PH-TC-TD-TR-TW-

D

6

C

STEM FLATS

3

Chlorine Service. Vented. Special Cleaning. Assembled dry. (for CS, Hastelloy and Ni-Cu valves. Ball must be Hastelloy or Ni-CU) PEEK seats, graphite packing, spiral wound graphite body seal, PEEK bearing Less lever and nut (bare stem) No Lubrication. Assembled Dry. Cleaned for industrial gas (CS only) Drilled & tapped purge port with plugs 4" extended bonnet Live loaded (lever operated) Live loaded (gear operator or actuator) Multiseal seats, PTFE chevron packing, spiral wound PTFE body seal, PEEK bearing Flat Face Flanges Double Packed 4” Extended Bonnet Devlon® seats, graphite packing, spiral wound graphite body seal, PEEK bearing Double Packed 4” Extended Bonnet with Monitoring Port CE Marking. See Page D-3 “Product Approvals” for availability. Garlock EVSP Stem Packing w/Spiral Wound Graphite Gasket (Fire Safe by Design) Kolsterised ball Gear operator with standard handwheel Gear operator with standard handwheel & locking device Gear operator with oversize handwheel Gear operator with oversize handwheel & locking device 17-4 PH stem Hydrostatic test with certified report APIE 6D Test (hydrostatic testing) Hydrostatic test with certified report & MTR 17 Hydrostatic test with certified report & witnessed

-26-

5

1

OR MOUNTING

2.25” Stem Extension (Carbon Steel, Zinc Plated) (1” - 2”) Side Vented Ball (Uni-Directional). Not available with plated CS ball. UHMWPE seats, graphite packing, spiral wound graphite body seal, PEEK bearing Graphite packing, spiral wound graphite body seal, RPTFE bearing (API 607, 6th edition, ISO 10497:2010)

-EP2

10

OPTION

-04-14-21-

13

7

8

G

H

4

15

9 11

14

STEM FLATS

• Complete the product number by adding a suffix (or multiple suffixes) to the base product number. A suffix for seat & seal materials must be selected. • To specify multiple options, add the desired suffixes in the numerical order shown below. NOTE: Not all suffixes can be combined together. • Minimum quantities may apply.

17

12

21

16

ØL STEM

OPTIONS AVAILABLE: (MORE INFORMATION IN SECTION J)

E

STEM FLATS

21

ASTM A216-WCB ASTM A216-WCB ASTM A108 Type 1215 or A216-WCB Chrome Plated ASTM A108 Type 1215 Defined by Seat Suffix Selected See “95” or “80” also “38” & “21” Defined by Seat Suffix Selected Defined by Seat Suffix Selected Defined by Seat Suffix Selected 316 Stainless Steel 316 Stainless Steel ASTM A108 Type 1215 ASTM A194 Grade 8 ASTM A366 Steel w/Vinyl Grip 302 & 304 Stainless Steel ASTM A108 Type 1215 ASTM A366 Steel SAE J429 Grade 2 ASTM A193-B7 ASTM A193-Grade B7 ASTM A194-Grade 2H 302 or 304 Stainless Steel

D

1

• 88A-F40 Series (316 SS Ball & Stem)

MATERIAL

6

20

19

J

K

L

M

N

WT.

3.500

0.98

1.95

0.750

0.477

5/16-18

31.5

4.370

1.42

2.84

1.000

0.620

3/8-16

53.0

5.070

1.42

2.84

1.000

0.620

3/8-16

65.0

REV. 04MAY17 industrial.apollovalves.com

Customer Service (704) 841-6000

D-101

88A-F00 SERIES CARBON STEEL ASME CLASS 600 FLANGED FULL PORT BALL VALVE - 3” THRU 4” FOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3. STANDARD MATERIAL LIST

VARIATIONS AVAILABLE

PART

Ball

4

Stem

5

Seats

6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22

Body Seal Stem Seals Stem Bearing Grounding Spring Grounding Spring Packing Gland Stem Screw Handle Adapter Pipe Handle Gland Plate Stops Lock Plate Stop Screws Gland Plate Screws Body Joint Stud Body Joint Nut Adapter Screw 12

17

E 18

STEM FLATS

(SUFFIX)

9 11 7

4 8

13

10

-38-45-49-67-69-70-76-77-80-82-90-95-9P-CE-EP-KB-MG-MH-MJ-MK-PH-TC-TD-TR-TW-

2

5 3

6

C

21

Chlorine Service. Vented. Special Cleaning. Assembled dry. (for CS, Hastelloy and Ni-Cu valves. Ball must be Hastelloy or Ni-CU) PEEK seats, graphite packing, spiral wound graphite body seal, PEEK bearing Less lever and nut (bare stem) No Lubrication. Assembled Dry. Cleaned for industrial gas (CS only) Drilled & tapped purge port with plugs 4" extended bonnet Live loaded (lever operated) Live loaded (gear operator or actuator) Multiseal seats, PTFE chevron packing, spiral wound PTFE body seal, PEEK bearing Flat Face Flanges Double Packed 4” Extended Bonnet Devlon® seats, graphite packing, spiral wound graphite body seal, PEEK bearing Double Packed 4” Extended Bonnet with Monitoring Port CE Marking. See Page D-3 “Product Approvals” for availability. Garlock EVSP Stem Packing w/Spiral Wound Graphite Gasket (Fire Safe by Design) Kolsterised ball Gear operator with standard handwheel Gear operator with standard handwheel & locking device Gear operator with oversize handwheel Gear operator with oversize handwheel & locking device 17-4 PH stem Hydrostatic test with certified report API 6D Test (hydrostatic testing) Hydrostatic test with certified report & MTR Hydrostatic test with certified report & witnessed

-26-

MOUNTING 1

Side Vented Ball (Uni-Directional). Not available with plated CS ball. UHMWPE seats, graphite packing, spiral wound graphite body seal, PEEK bearing Graphite packing, spiral wound graphite body seal, RPTFE bearing (API 607, 6th edition, ISO 10497:2010)

-24-

14

16

20

B

E Pressure/Temperature Ratings - Page M-25, Graph No. 35 12

17

STEM FLATS

15

9 11 7

4 8

13

14

16 10

2

A

F

M

STEM FLATS

J

K

G

19 N

SQUARE

22

18

ØL STEM

H

ACTUATOR MOUNTING

OPTION

-14-21-

A

F

G

M

H

STEM FLATS

• Complete the product number by adding a suffix (or multiple suffixes) to the base product number. A suffix for seat & seal materials must be selected. • To specify multiple options, add the desired suffixes in the numerical order shown below. NOTE: Not all suffixes can be combined together. • Minimum quantities may apply.

22

ØL STEM

15

OPTIONS AVAILABLE: (MORE INFORMATION IN SECTION J)

D

3

• 88A-F40 Series (316 SS Ball & Stem)

ASTM A216-WCB ASTM A216-WCB ASTM A108 Type 1215 or A216-WCB Chrome Plated ASTM A108 Type 1215 Defined by Seat Suffix Selected See “95” or “80” also “38” & “21” Defined by Seat Suffix Selected Defined by Seat Suffix Selected Defined by Seat Suffix Selected 316 Stainless Steel 316 Stainless Steel ASTM A108 Type 1215 304 Stainless Steel ASTM A366 Steel with Vinyl Grip Galvanized Steel (not shown) 316 Stainless Steel ASTM A108 Type 1215 ASTM A366 Steel SAE J429 Grade 2 ASTM A193-B7 ASTM A193- Grade B7 ASTM A194- Grade 2H 18-8 Stainless Steel

D

2

Body Retainer

1

MATERIAL

ACTUATOR MOUNTING

DIMENSIONS PRODUCT NUMBER 88A-F00-XX 88A-F0A-XX

SIZE

A

B

C

3”

3.00

14.00

7.00

4”

4.00

17.00

7.19

E

1 F

8.55

18.00

11.20

34.00

D

REV. 04MAY17 D-102

Customer Service (704) 841-6000

5

G

H

0.50

4.750

0.75

6.630

5.946 C 8.081

3

J

K

1.42

62.84

1.74 B

3.48

www.apolloflowcontrols.com

L

M

N

20 1.250

0.725

3/8-16

101.0

1.500

0.780

1/2-13

194.0

21

WT.

“Apollo” Flow Controls

88A-F00 SERIES CARBON STEEL ASME CLASS 600 FLANGED FULL PORT BALL VALVE - 6” FOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3. STANDARD MATERIAL LIST

VARIATIONS AVAILABLE

3

Ball

4

Stem

5

Seats

6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22

Body Seal Stem Seals Stem Bearing Grounding Spring Grounding Spring Packing Gland Stem Screw Handle Adapter Pipe Handle Gland Plate Stops Lock Plate Stop Screws Gland Plate Screws Body Joint Stud Body Joint Nut Adapter Screw

E

13

17

22

STEM FLATS

(SUFFIX)

8

-38-45-49-67-69-70-76-77-80-82-90-95-9P-CE-

14

-KB-MG-MH-MJ-MK-PH-TC-TD-TR-TW-

A MOUNTING 5 3 6

21

20 E Pressure/Temperature Ratings - Page M-26, Graph No. 36

B

22

ØL STEM

19 N

STEM FLATS

8

14

2

F

H

STEM FLATS

4

A

J

10

12

18 16 9 11 7

15

K

SQUARE

13

17

G

ACTUATOR MOUNTING

Chlorine Service. Vented. Special Cleaning. Assembled dry. (for CS, Hastelloy and Ni-Cu valves. Ball must be Hastelloy or Ni-CU) PEEK seats, graphite packing, spiral wound graphite body seal, PEEK bearing Less lever and nut (bare stem) No Lubrication. Assembled Dry. Cleaned for industrial gas (CS only) Drilled & tapped purge port with plugs 4" extended bonnet Live loaded (lever operated) Live loaded (gear operator or actuator) Multiseal seats, PTFE chevron packing, spiral wound PTFE body seal, PEEK bearing Flat Face Flanges Double Packed 4” Extended Bonnet Devlon® seats, graphite packing, spiral wound graphite body seal, PEEK bearing Double Packed 4” Extended Bonnet with Monitoring Port CE Marking. See Page D-3 “Product Approvals” for availability. Garlock EVSP Stem Packing w/Spiral Wound Graphite Gasket (Fire Safe by Design) Kolsterised ball Gear operator with standard handwheel Gear operator with standard handwheel & locking device Gear operator with oversize handwheel Gear operator with oversize handwheel & locking device 17-4 PH stem Hydrostatic test with certified report API 6D Test (hydrostatic testing) Hydrostatic test with certified report & MTR Hydrostatic test with certified report & witnessed

-26-

2

C

Side Vented Ball (Uni-Directional). Not available with plated CS ball. UHMWPE seats, graphite packing, spiral wound graphite body seal, PEEK bearing Graphite packing, spiral wound graphite body seal, RPTFE bearing (API 607, 6th edition, ISO 10497:2010)

-24-

4

1

OPTION

-14-21-

F

G

H

• Complete the product number by adding a suffix (or multiple suffixes) to the base product number. A suffix for seat & seal materials must be selected. • To specify multiple options, add the desired suffixes in the numerical order shown below. NOTE: Not all suffixes can be combined together. • Minimum quantities may apply.

-EP-

18 16 9 11 7

15 10

OPTIONS AVAILABLE: (MORE INFORMATION IN SECTION J)

12

ØL STEM

STEM FLATS

• 88A-F40 Series (316 SS Ball & Stem)

ASTM A216-WCB ASTM A216-WCB ASTM A108 Type 1215 or A216-WCB Chrome Plated ASTM A108 Type 1215 Defined by Seat Suffix Selected See “95” or “80” also “38” & “21” Defined by Seat Suffix Selected Defined by Seat Suffix Selected Defined by Seat Suffix Selected 316 Stainless Steel 316 Stainless Steel ASTM A108 Type 1215 304 Stainless Steel 316 Stainless Steel Galvanized Steel (not shown) 316 Stainless Steel ASTM A108 Type 1215 ASTM A366 Steel SAE J429 Grade 2 ASTM A193-B7 ASTM A193-Grade B7 ASTM A194-Grade 2H 18-8 Stainless Steel

D

2

Body Retainer

1

MATERIAL

D

PART

ACTUATOR MOUNTING

DIMENSIONS PRODUCT NUMBER 88A-F0C-XX

SIZE 6”

A 6.00

“Apollo” Flow Controls

B 22.00

C 9.94

D 14.17

E 45.00

F

1

1.00

G 8.190

5

3H

9.915

C

J

K

2.298 6 3.48 B

industrial.apollovalves.com

21

L

M

N

WT.

20 2.000

1.375

3/4-10

500.0

REV. 04MAY17

Customer Service (704) 841-6000

D-103

88A-F00 SERIES CARBON STEEL ASME CLASS 600 FLANGED FULL PORT BALL VALVE - 8” FOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3. STANDARD MATERIAL LIST

VARIATIONS AVAILABLE

Body Retainer

3

Ball

4

Stem

5

Seats

12

11

M

• Complete the product number by adding a suffix (or multiple suffixes) to the base product number. A suffix for seat & seal materials must be selected. • To specify multiple options, add the desired suffixes in the numerical order shown below. NOTE: Not all suffixes can be combined together. • Minimum quantities may apply. (SUFFIX)

-38-45-49-67-69-70-76-77-80-82-90-95-9P-CE-

E

-EP-

A 1

5

NTING

2

14

3 6

C

15

H

B

ACTUATOR MOUNTING

13

12

11

M ØL

-KB-MG-MH-MJ-MK-PH-TC-TD4-TR9 -TW-

Pressure/Temperature Ratings - Page M-26, Graph No. 36 7 10

8

E

45°

Chlorine Service. Vented. Special Cleaning. Assembled dry. (for CS, Hastelloy and Ni-Cu valves. Ball must be Hastelloy or Ni-CU) PEEK seats, graphite packing, spiral wound graphite body seal, PEEK bearing Less lever and nut (bare stem) No Lubrication. Assembled Dry. Cleaned for industrial gas (CS only) Drilled & tapped purge port with plugs 4" extended bonnet Live loaded (lever operated) Live loaded (gear operator or actuator) Multiseal seats, PTFE chevron packing, spiral wound PTFE body seal, PEEK bearing Flat Face Flanges Double Packed 4” Extended Bonnet Devlon® seats, graphite packing, spiral wound graphite body seal, PEEK bearing Double Packed 4” Extended Bonnet with Monitoring Port CE Marking. See Page D-3 “Product Approvals” for availability. Garlock EVSP Stem Packing w/Spiral Wound Graphite Gasket (Fire Safe by Design) Kolsterised ball Gear operator with standard handwheel Gear operator with standard handwheel & locking device Gear operator with oversize handwheel Gear operator with oversize handwheel & locking device 17-4 PH stem Hydrostatic test with certified report API 6D Test (hydrostatic testing) Hydrostatic test with certified report & MTR Hydrostatic test with certified report & witnessed

-26-

D

22.5°

A

+.000

J -.015

ØK STEM

Side Vented Ball (Uni-Directional). Not available with plated CS ball. UHMWPE seats, graphite packing, spiral wound graphite body seal, PEEK bearing Graphite packing, spiral wound graphite body seal, RPTFE bearing (API 607, 6th edition, ISO 10497:2010)

-24-

10

G ±.001

OPTION

-14-21-

F

4 9

7 8

D

ØL

OPTIONS AVAILABLE: (MORE INFORMATION IN SECTION J)

KEYSEAT DEPTH

Body Seal Stem Seals Stem Bearing Grounding Spring Grounding Spring Packing Gland Gland Plate Gland Plate Screws Body Joint Stud Body Joint Nut

H

6 7 8 9 10 11 12 13 14 15

• 88A-F40 Series (316 SS Ball & Stem)

ASTM A216-WCB ASTM A216-WCB ASTM A108 Type 1215 or ASTM A216-WCB Chrome Plated ASTM A108 Type 1215 Defined by Seat Suffix Selected See “95” or “80” also “38” & “21” Defined by Seat Suffix Selected Defined by Seat Suffix Selected Defined by Seat Suffix Selected 316 Stainless Steel 316 Stainless Steel ASTM A108 Type 1215 316 Stainless Steel ASTM A193-B7 ASTM A193 Grade B7 ASTM A194 Grade 2H

F

1 2

MATERIAL

KEYSEAT DEPTH

PART

G ±.001

J

+.000 -.015

ØK STEM

1

5

ACTUATOR MOUNTING

PRODUCT NUMBER 88A-F0E-XX

6

C

DIMENSIONS

15

B

SIZE

A

B

C

D

E

F

G

H

J

K

L

M

WT.

8”

8.00

26.00

11.20

17.77

12.00

2.25*

0.627

5.77

2.133

2.49

10.00

5/8-11

920.0

* Keyway Length

REV. 04MAY17 D-104

2

14

3

Customer Service (704) 841-6000

www.apolloflowcontrols.com

“Apollo” Flow Controls

88L-F40 SERIES LOW TEMP. CARBON STEEL ASME CLASS 600 FLANGED FULL PORT BALL VALVE - 1” FOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3 AND RATED TO -50°F (-46°C). OPTIONS AVAILABLE: (MORE INFORMATION IN SECTION J)

STANDARD MATERIAL LIST PART

5

Seats

6

Body Seal Stem Seals Stem Bearing Grounding Spring Grounding Spring Packing Gland Stem Screw Lever Gland Plate Stop Lock Plate Spacer Stop Screw Gland Plate Screws

7 8 9 10 11 12 13 14 15 16 17 18

18

F

STEM FLATS

19

ASTM A352-LCC ASTM A352-LCC ASTM A276-316 ASTM A276-316 Defined by Seat Suffix Selected See “95” or “80” also “38” & “21” Defined by Seat Suffix Selected Defined by Seat Suffix Selected Defined by Seat Suffix Selected 316 Stainless Steel 316 Stainless Steel See Options Available Steel, Zinc Plated ASTM A366 Steel with Vinyl Grip 302 or 304 Stainless Steel ASTM A108 Type 1215 ASTM A366 Steel ASTM A276 Type 216 SAE J429 Grade 2 Steel Zinc Plated ASTM A193 B7

12

16

9 11 7

-26-38-45-49-67-69-70-76-77-80-82-90-95-9P-CE-

13 1

-EP-KB-MG-MH-MJ-MK-PH-TC-TD-TR-TW-

10

M

STEM FLATS

6 5

4

C

ACTUATOR MOUNTING

STEM FLATS

3

OUNTING

2.25” Stem Extension (Carbon Steel, Zinc Plated) (1” - 2”) Side Vented Ball (Uni-Directional). Not available with plated CS ball. UHMWPE seats, graphite packing, spiral wound graphite body seal, PEEK bearing Graphite packing, spiral wound graphite body seal, RPTFE bearing (API 607, 6th edition, ISO 10497:2010)

-24-

2

A

G

H

17 14 8

OPTION

-04-14-21-

E

15 ØL STEM

(SUFFIX)

F

B

13 Graph No. 36 15 M-26, Pressure/Temperature Ratings - Page

19

ØL STEM

G

2

J

A

K

1

10

M

STEM FLATS

6 5

4

3

ACTUATOR MOUNTING C

DIMENSIONS PRODUCT NUMBER 88L-F45-XX

9 11 7

17 14 8

H

N SQUARE

Chlorine Service. Vented. Special Cleaning. Assembled dry. (for CS, Hastelloy and Ni-Cu valves. Ball must be Hastelloy or Ni-CU) PEEK seats, graphite packing, spiral wound graphite body seal, PEEK bearing Less lever and nut (bare stem) No Lubrication. Assembled Dry. Cleaned for industrial gas (CS only) Drilled & tapped purge port with plugs 4" extended bonnet Live loaded (lever operated) Live loaded (gear operator or actuator) Multiseal seats, PTFE chevron packing, spiral wound PTFE body seal, PEEK bearing Flat Face Flanges Double Packed 4” Extended Bonnet Devlon® seats, graphite packing, spiral wound graphite body seal, PEEK bearing Double Packed 4” Extended Bonnet with Monitoring Port CE Marking. See Page D-3 “Product Approvals” for availability. Garlock EVSP Stem Packing w/Spiral Wound Graphite Gasket (Fire Safe by Design) Kolsterised ball Gear operator with standard handwheel Gear operator with standard handwheel & locking device Gear operator with oversize handwheel Gear operator with oversize handwheel & locking device 17-4 PH stem Hydrostatic test with certified report API 6D Test (hydrostatic testing) E report & MTR Hydrostatic test with certified 18 report & witnessed Hydrostatic test with certified 12 16

D

3 4

Body Retainer Ball Stem

D

1 2

• Complete the product number by adding a suffix (or multiple suffixes) to the base product number. A suffix for seat & seal materials must be selected. • To specify multiple options, add the desired suffixes in the numerical order shown below. NOTE: Not all suffixes can be combined together. • Minimum quantities may apply.

MATERIAL

B

SIZE

A

B

C

D

E

F

G

H

J

K

L

M

N

WT.

1”

1.00

8.50

5.13

3.99

6.65

0.45

1.730

2.460

0.98

1.95

0.625

0.412

5/16-18

13.0

“Apollo” Flow Controls

REV. 04MAY17 industrial.apollovalves.com

Customer Service (704) 841-6000

D-105

88L-F40 SERIES LOW TEMP. CARBON STEEL ASME CLASS 600 FLANGED FULL PORT BALL VALVE - 1.5” THRU 2.5” FOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3 AND RATED TO -50°F (-46°C). OPTIONS AVAILABLE: (MORE INFORMATION IN SECTION J)

STANDARD MATERIAL LIST

6

Body Seal Stem Seals Stem Bearing Grounding Spring Grounding Spring Packing Gland Stem Nut Lever Gland Plate Stop Lock Plate Stop Screw Gland Plate Screws Body Joint Stud Body Joint Nut Lock Washer

7 8 9 10 11 12 13 14 15 16 17 18 19 20

F

STEM FLATS

21

4

G

-KB-MG-MH-MJ-MK-PH-TC-TD-TR-TW-

13

2

M

A

STEM FLATS

-EP-

7

5

1

3

R MOUNTING

6

C

20

Chlorine Service. Vented. Special Cleaning. Assembled dry. (for CS, Hastelloy and Ni-Cu valves. Ball must be Hastelloy or Ni-CU) PEEK seats, graphite packing, spiral wound graphite body seal, PEEK bearing Less lever and nut (bare stem) No Lubrication. Assembled Dry. Cleaned for industrial gas (CS only) Drilled & tapped purge port with plugs 4" extended bonnet Live loaded (lever operated) Live loaded (gear operator or actuator) Multiseal seats, PTFE chevron packing, spiral wound PTFE body seal, PEEK bearing Flat Face Flanges Double Packed 4” Extended Bonnet Devlon® seats, graphite packing, spiral wound graphite body seal, PEEK bearing Double Packed 4” Extended Bonnet with Monitoring Port CE Marking. See Page D-3 “Product Approvals” for availability. Garlock EVSP Stem Packing w/Spiral Wound Graphite Gasket (Fire Safe by Design) Kolsterised ball Gear operator with standard handwheel Gear operator with standard handwheel & locking device Gear operator with oversize handwheel Gear operator with oversize handwheel & locking device 17-4 PH stem Hydrostatic test with certified report API 6D Test (hydrostatic testing) Hydrostatic test with certified report & MTR Hydrostatic test with certified report & witnessed

-26-

17

10

8

Side Vented Ball (Uni-Directional). Not available with plated CS ball. UHMWPE seats, graphite packing, spiral wound graphite body seal, PEEK bearing Graphite packing, spiral wound graphite body seal, RPTFE bearing (API 607, 6th edition, ISO 10497:2010)

-24-

E

15

OPTION

-14-21-

-38-45-49-67-69-70-76-77-80-82-90-95-9P-CE-

9 11

14

H

ØL STEM

12

21

16

(SUFFIX)

F

Seats

3

ASTM A352-LCC ASTM A352-LCC ASTM A276-316 or A351-CF8M ASTM A276-316 Defined by Seat Suffix Selected See “95” or “80” also “38” & “21” Defined by Seat Suffix Selected Defined by Seat Suffix Selected Defined by Seat Suffix Selected 316 Stainless Steel 316 Stainless Steel ASTM A108 Type 1215 ASTM A194 Grade 8 ASTM A366 Steel with Vinyl Grip 302 or 304 Stainless Steel ASTM A108 Type 1215 ASTM A366 Steel SAE J429 Grade 2 ASTM A193 B7 ASTM A193 Grade B7 ASTM A194 Grade 2H 302 or ­304 SS

STEM FLATS

5

2

D

4

Body Retainer Ball Stem

1

• Complete the product number by adding a suffix (or multiple suffixes) to the base product number. A suffix for seat & seal materials must be selected. • To specify multiple options, add the desired suffixes in the numerical order shown below. NOTE: Not all suffixes can be combined together. • Minimum quantities may apply.

MATERIAL

Pressure/Temperature Ratings Page M-27 & M-28, Graph Nos. 37 & 38

19

B

ACTUATOR MOUNTING

18

ØL STEM

14 4

8

M J

ACTUATOR MOUNTING

SIZE

A

B

C

D

E

F

G

H

J

K

L

M

N

WT.

1.5”

1.50

9.50

3.62

5.03

8.40

0.74

2.730

3.500

0.98

1.95

0.750

0.477

5/16-18

31.5

88L-F48-XX

2”

2.00

11.50

5.49

6.06

12.06

0.84

3.490

4.370

1.42

2.84

1.000

0.620

3/8-16

53.0

88L-F49-XX

2.5”

2.50

13.00

6.02

6.63

12.06

0.84

4.190

5.070

1.42

2.84

1.000

0.620

3/8-16

65.0

REV. 04MAY17 D-106

5

1

DIMENSIONS PRODUCT NUMBER 88L-F47-XX

A

STEM FLATS

K

SQUARE

G

N

21

16

H

PART

Customer Service (704) 841-6000

www.apolloflowcontrols.com

“Apollo” Flow Controls

3 C

88L-F40 SERIES LOW TEMP. CARBON STEEL ASME CLASS 600 FLANGED FULL PORT BALL VALVE - 3” THRU 4” FOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3 AND RATED TO -50°F (-46°C). OPTIONS AVAILABLE: (MORE INFORMATION IN SECTION J)

STANDARD MATERIAL LIST

5

Seats

6

Body Seal Stem Seals Stem Bearing Grounding Spring Grounding Spring Packing Gland Stem Screw Handle Adapter Pipe Handle Gland Plate Stops Lock Plate Stop Screws Gland Plate Screws Body Joint Stud Body Joint Nut Adapter Screw

2 3

7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22

ASTM A352-LCC ASTM A352-LCC ASTM A276-316 or A351-CF8M ASTM A276 Type 316 Defined by Seat Suffix Selected See “95” or “80” also “38” & “21” Defined by Seat Suffix Selected Defined by Seat Suffix Selected Defined by Seat Suffix Selected 316 Stainless Steel 316 Stainless Steel ASTM A108 Type 1215 304 Stainless Steel ASTM A366 Steel with Vinyl Grip Galvanized Steel (not shown) 316 Stainless Steel ASTM A108 Type 1215 ASTM A366 Steel SAE J429 Grade 2 ASTM A193-B7 ASTM A193 Grade B7 ASTM A194 Grade 2H 18-8 Stainless Steel 12

17

E 18

STEM FLATS

4 8

-38-45-49-67-69-70-76-77-80-82-90-95-9P-CE-EP-

13

-KB-MG-MH-MJ-MK-PH-TC-TD-TR-TW-

14

16 10

2

5 3

6

C

21

20

Pressure/Temperature Ratings - Page M-27, Graph No. 38

B

E 18

22

ØL STEM

15

STEM FLATS

F

9 11 7

4 8

13

14

16 10

2

A

J

K

M

STEM FLATS

N

G

19

SQUARE

12

17

H

ACTUATOR MOUNTING

Chlorine Service. Vented. Special Cleaning. Assembled dry. (for CS, Hastelloy and Ni-Cu valves. Ball must be Hastelloy or Ni-CU) PEEK seats, graphite packing, spiral wound graphite body seal, PEEK bearing Less lever and nut (bare stem) No Lubrication. Assembled Dry. Cleaned for industrial gas (CS only) Drilled & tapped purge port with plugs 4" extended bonnet Live loaded (lever operated) Live loaded (gear operator or actuator) Multiseal seats, PTFE chevron packing, spiral wound PTFE body seal, PEEK bearing Flat Face Flanges Double Packed 4” Extended Bonnet Devlon® seats, graphite packing, spiral wound graphite body seal, PEEK bearing Double Packed 4” Extended Bonnet with Monitoring Port CE Marking. See Page D-3 “Product Approvals” for availability. Garlock EVSP Stem Packing w/Spiral Wound Graphite Gasket (Fire Safe by Design) Kolsterised ball Gear operator with standard handwheel Gear operator with standard handwheel & locking device Gear operator with oversize handwheel Gear operator with oversize handwheel & locking device 17-4 PH stem Hydrostatic test with certified report API 6D Test (hydrostatic testing) Hydrostatic test with certified report & MTR Hydrostatic test with certified report & witnessed

-26-

MOUNTING 1

Side Vented Ball (Uni-Directional). Not available with plated CS ball. UHMWPE seats, graphite packing, spiral wound graphite body seal, PEEK bearing Graphite packing, spiral wound graphite body seal, RPTFE bearing (API 607, 6th edition, ISO 10497:2010)

-24-

A

F

G

H

M

STEM FLATS

9 11 7

OPTION

-14-21-

22

ØL STEM

15

(SUFFIX)

D

4

Body Retainer Ball Stem

1

• Complete the product number by adding a suffix (or multiple suffixes) to the base product number. A suffix for seat & seal materials must be selected. • To specify multiple options, add the desired suffixes in the numerical order shown below. NOTE: Not all suffixes can be combined together. • Minimum quantities may apply.

MATERIAL

D

PART

ACTUATOR MOUNTING

DIMENSIONS PRODUCT NUMBER 88L-F40-XX 88L-F4A-XX

SIZE

A

B

C

D

E

1 F

G

3”

3.00

14.00

7.00

8.55

18.00

0.50

4.750

4”

4.00

17.00

7.19

11.20

34.00

0.75

6.630

“Apollo” Flow Controls

5 H 3

5.946 C 8.081

J

K

1.42 1.74 B

6

2.84 3.48

L 20 211.250 1.500

M

N

WT.

0.725

3/8-16

101.0

0.780

1/2-13

194.0

REV. 04MAY17 industrial.apollovalves.com

Customer Service (704) 841-6000

D-107

88L-F40 SERIES LOW TEMP. CARBON STEEL ASME CLASS 600 FLANGED FULL PORT BALL VALVE - 6” FOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3 AND RATED TO -50°F (-46°C). OPTIONS AVAILABLE: (MORE INFORMATION IN SECTION J)

STANDARD MATERIAL LIST PART

5

Seats

6

Body Seal Stem Seals Stem Bearing Grounding Spring Grounding Spring Packing Gland Stem Screw Handle Adapter Pipe Handle Gland Plate Stops Lock Plate Stop Screws Gland Plate Screws Body Joint Stud Body Joint Nut Adapter Screw

3

7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22

ASTM A352-LCC ASTM A352-LCC ASTM A276-316 or A351-CF8M ASTM A276-316 Defined by Seat Suffix Selected See “95” or “80” also “38” & “21” Defined by Seat Suffix Selected Defined by Seat Suffix Selected Defined by Seat Suffix Selected 316 Stainless Steel 316 Stainless Steel ASTM A108 Type 1215 304 Stainless Steel ASTM A366 Steel with Vinyl Grip Galvanized Steel (not shown) 316 Stainless Steel ASTM A108 Type 1215 ASTM A366 Steel SAE J429 Grade 2 ASTM A193-B7 ASTM A193-Grade B7 ASTM A194-Grade 2H 18-8 Stainless Steel E

13

17

22

STEM FLATS

-24-

Chlorine Service. Vented. Special Cleaning. Assembled dry. (for CS, Hastelloy and Ni-Cu valves. Ball must be Hastelloy or Ni-CU) PEEK seats, graphite packing, spiral wound graphite body seal, PEEK bearing Less lever and nut (bare stem) No Lubrication. Assembled Dry. Cleaned for industrial gas (CS only) Drilled & tapped purge port with plugs 4" extended bonnet Live loaded (lever operated) Live loaded (gear operator or actuator) Multiseal seats, PTFE chevron packing, spiral wound PTFE body seal, PEEK bearing Flat Face Flanges Double Packed 4” Extended Bonnet Devlon®seats, graphite packing, spiral wound graphite body seal, PEEK bearing Double Packed 4” Extended Bonnet with Monitoring Port CE Marking. See Page D-3 “Product Approvals” for availability. Garlock EVSP Stem Packing w/Spiral Wound Graphite Gasket (Fire Safe by Design) Kolsterised ball Gear operator with standard handwheel Gear operator with standard handwheel & locking device Gear operator with oversize handwheel Gear operator with oversize handwheel & locking device 17-4 PH stem Hydrostatic test with certified report API 6D Test (hydrostatic testing) Hydrostatic test with certified report & MTR Hydrostatic test with certified report & witnessed

-26-38-45-49-67-69-70-76-77-80-82-90-95-9P-CE-

-KB-MG-MH-MJ-MK-PH-TC-TD-TR-TW-

14

2

F

G

H

STEM FLATS

8

Side Vented Ball (Uni-Directional). Not available with plated CS ball. UHMWPE seats, graphite packing, spiral wound graphite body seal, PEEK bearing Graphite packing, spiral wound graphite body seal, RPTFE bearing (API 607, 6th edition, ISO 10497:2010)

-EP-

18 16 9 11 7

15

OPTION

-14-21-

12

ØL STEM

10

(SUFFIX)

A

4

R MOUNTING 5

1

3 6

C

21

Pressure/Temperature Ratings - Page M-27, Graph No. 39

20

B

12 18 16 9 11 7

STEM FLATS

8

2

F

10

14

4

A

J

H

STEM FLATS

15

K

SQUARE

22

ØL STEM

19 N

G

ACTUATOR MOUNTING

E

13

17

D

2

D

4

Body Retainer Ball Stem

1

• Complete the product number by adding a suffix (or multiple suffixes) to the base product number. A suffix for seat & seal materials must be selected. • To specify multiple options, add the desired suffixes in the numerical order shown below. NOTE: Not all suffixes can be combined together. • Minimum quantities may apply.

MATERIAL

ACTUATOR MOUNTING

DIMENSIONS PRODUCT NUMBER 88L-F4C-XX

SIZE

A

B

C

D

E

F1

G

6”

6.00

22.00

9.94

13.64

45.00

1.00

8.190

REV. 04MAY17 D-108

Customer Service (704) 841-6000

5 H 3

9.915

J 2.298

C

K 6

B

www.apolloflowcontrols.com

3.48

L

M

N

WT.

2.000 20

1.375

3/4-10

500.0

21

“Apollo” Flow Controls

88L-F40 SERIES LOW TEMP. CARBON STEEL ASME CLASS 600 FLANGED FULL PORT BALL VALVE - 8” FOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3 AND RATED TO -50°F (-46°C). OPTIONS AVAILABLE: (MORE INFORMATION IN SECTION J)

STANDARD MATERIAL LIST

6

Body Seal Stem Seals Stem Bearing Grounding Spring Grounding Spring Packing Gland Gland Plate Gland Plate Screws Body Joint Stud Body Joint Nut

7 8 9 10 11 12 13 14

H

15

11

M

4 9

7 8

-14-21-

-26-38-45-49-67-69-70-76-77-80-82-90-95-9P-CE-

10

ØK STEM

1

5

OUNTING

2

14

3 6

C

15

H

B

ACTUATOR MOUNTING

13

11

M

12

9

Chlorine Service. Vented. Special Cleaning. Assembled dry. (for CS, Hastelloy and Ni-Cu valves. Ball must be Hastelloy or Ni-CU) PEEK seats, graphite packing, spiral wound graphite body seal, PEEK bearing Less lever and nut (bare stem) No Lubrication. Assembled Dry. Cleaned for industrial gas (CS only) Drilled & tapped purge port with plugs 4" extended bonnet Live loaded (lever operated) Live loaded (gear operator or actuator) Multiseal seats, PTFE chevron packing, spiral wound PTFE body seal, PEEK bearing Flat Face Flanges Double Packed 4” Extended Bonnet Devlon® seats, graphite packing, spiral wound graphite body seal, PEEK bearing Double Packed 4” Extended Bonnet with Monitoring Port CE Marking. See Page D-3 “Product Approvals” for availability. Garlock EVSP Stem Packing w/Spiral Wound Graphite Gasket (Fire Safe by Design) Kolsterised ball Gear operator with standard handwheel Gear operator with standard handwheel & locking device Gear operator with oversize handwheel Gear operator with oversize handwheel & locking device 17-4 PH stem Hydrostatic test with certified report API 6D Test (hydrostatic testing) Hydrostatic test with certified report & MTR Hydrostatic test with certified report & witnessed

Pressure/Temperature Ratings - Page M-27, Graph No. 39 ØL

7 8

10

E

45°

D

22.5°

A

J

+.000 -.015

-EP-KB-MG-MH-MJ-MK-PH-TC-TD-TR-TW- 4

A

G ±.001

OPTION

Side Vented Ball (Uni-Directional). Not available with plated CS ball. UHMWPE seats, graphite packing, spiral wound graphite body seal, PEEK bearing Graphite packing, spiral wound graphite body seal, RPTFE bearing (API 607, 6th edition, ISO 10497:2010)

-24-

E

D

ØL

12

(SUFFIX)

F

Seats

3

ASTM A352-LCC ASTM A352-LCC ASTM A276-316 or A351-CF8M ASTM A276-316 Defined by Seat Suffix Selected See “95” or “80” also “38” & “21” Defined by Seat Suffix Selected Defined by Seat Suffix Selected Defined by Seat Suffix Selected 316 Stainless Steel 316 Stainless Steel ASTM A108 Type 1215 316 Stainless Steel ASTM A193-B7 ASTM A193 Grade B7 ASTM A194 Grade 2H

F

5

2

KEYSEAT DEPTH

4

Body Retainer Ball Stem

1

• Complete the product number by adding a suffix (or multiple suffixes) to the base product number. A suffix for seat & seal materials must be selected. • To specify multiple options, add the desired suffixes in the numerical order shown below. NOTE: Not all suffixes can be combined together. • Minimum quantities may apply.

MATERIAL

KEYSEAT DEPTH

PART

G ±.001

J

ØK STEM

+.000 -.015

1

5

ACTUATOR MOUNTING

3 6

C

DIMENSIONS PRODUCT NUMBER 88L-F4E-XX

2

14 15

B

SIZE

A

B

C

D

E

F

G

H

J

K

L

M

WT.

8”

8.00

26.00

11.20

17.77

12.00

2.25*

0.627

5.77

2.133

2.49

10.00

5/8-11

920.0

* Keyway Length

“Apollo” Flow Controls

REV. 04MAY17 industrial.apollovalves.com

Customer Service (704) 841-6000

D-109

87T-100 SERIES TITANIUM ASME CLASS 150 FLANGED STD. PORT BALL VALVE - 1.5” THRU 2” FOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3. STANDARD MATERIAL LIST

VARIATIONS AVAILABLE

PART 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18

• • • • •

MATERIAL

Body Retainer Ball Stem Packing Gland Stem Seals Seats Gland Screws Gland Plate Stem Nut Lever Stem Bearing Stop Stop Screw Lock Plate Body Seal Lockwasher Grounding Spring Internal Grounding Spring

ASTM B367-C3 ASTM B348 GR 4 or 5 ASTM B348 GR 4 or 5 ASTM B348 GR 4 or 5 ASTM A276 Type 316 PTFE RPTFE ASTM A193 B8 Class 1 302 or 304 SS 316 SS 302 or 304 SS with Vinyl Grip RPTFE ASTM A276 Type 316 18-8 SS 302 or 304 SS RPTFE 302 or 304 SS SS Inconel x750

87A - 316 SS 87H - Hastelloy 87M - Monel (1.5” to 2” only) 87N - Nickel 87S - 304L SS

OPTIONS AVAILABLE: (MORE INFORMATION IN SECTION J)

• Minimum quantities apply • To specify an option, replace the “01” standard suffix with the suffix of the option. • To specify multiple options, replace the “01” suffix with the desired suffixes in the numerical order shown below. NOTE: Not all suffixes can be combined together. (SUFFIX)

OPTION

-01 -04-14-15-21-

Standard Configuration 2.25” Stem Extension (Carbon Steel, Zinc Plated) Side Vented Ball (Uni-Directional) Wheel Handle, Steel UHMWPE Seats Graphite packing, spiral wound graphite body seal, RPTFE bearing (API 607, 6th edition, ISO 10497:2010) PTFE Seats and Seals PEEK Seats and Graphite Packing No Lubrication. Assembled Dry. Oxygen Cleaned MPTFE Seats and Graphite Packing (Fire Safe) Drilled and Tapped Purge Port with Plug 4” Extended Bonnet Spiral Wound Gaskets w/PTFE Filler Live Loaded (Lever) Live Loaded (Gear, Actuator) Multi-Seal (Super TFE) 87A/88A Series Flat Face Flanges Double Packed 4” Extended Bonnet Double Packed 4” Extended Bonnet with Monitoring Port Garlock EVSP Stem Packing w/Spiral Wound Graphite Gasket (Fire Safe by Design) PCTFE Stem Bearing Positive Material Identification With Test Certificate Tested to API Spec 6D

-24-35-38-49-57-65-69-70-73-76-77-80-82-90-9P-EP-KF-MP-TC-TD-

Pressure/Temperature Ratings - Page M-32, Graph No. 47

ACTUATOR MOUNTING

DIMENSIONS PRODUCT NUMBER 87T-107-01 87T-108-01

D-110

SIZE

A

B

C

D

E

F

G

1.5”

1.25

6.50

3.50

2”

1.50

7.00

3.69

4.85

6.53

0.47

1.85

4.62

6.65

0.72

2.41

Customer Service (704) 841-6000

H

I

J

K

L

2.38

1.392

0.696

0.500

0.287

1/4-20

1.50

9

3.09

1.949

0.974

0.625

0.412

5/16-18

2.00

18

www.apolloflowcontrols.com

M

N

WT.

“Apollo” Flow Controls

87T-100 SERIES TITANIUM ASME CLASS 150 FLANGED STD. PORT BALL VALVE - 2.5” THRU 3” FOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3. STANDARD MATERIAL LIST

VARIATIONS AVAILABLE

PART 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20

MATERIAL

Body Retainer Ball Stem Packing Gland Stem Seals Seats Gland Screws Gland Plate Stem Nut Lever Stem Bearing Stop Stop Screw Lock Plate Body Seal Grounding Spring Body Joint Stud Body Joint Nut Lockwasher

ASTM B367-C3 ASTM B367-C3 ASTM B367-C3 or ASTM B348 GR 4 or 5 ASTM B348 GR 4 or 5 ASTM A276 Type 316 PTFE RPTFE ASTM A193 B8 Class 1 316 SS 18-8 SS 316 SS RPTFE ASTM A276 Type 316 316 SS 302 or 304 SS RPTFE SS ASTM A193 Grade B8M ASTM A194 Grade 8 302 or 304 SS

• • • •

87A - 316 SS 87H - Hastelloy 87N - Nickel 87S - 304L SS

OPTIONS AVAILABLE: (MORE INFORMATION IN SECTION J)

• Minimum quantities apply • To specify an option, replace the “01” standard suffix with the suffix of the option. • To specify multiple options, replace the “01” suffix with the desired suffixes in the numerical order shown below. NOTE: Not all suffixes can be combined together. (SUFFIX)

OPTION

-01 -04-14-21-

Standard Configuration 2.25” Stem Extension (Carbon Steel, Zinc Plated) Side Vented Ball (Uni-Directional) UHMWPE Seats Graphite packing, spiral wound graphite body seal, RPTFE bearing (API 607, 6th edition, ISO 10497:2010) PTFE Seats and Seals PEEK Seats and Graphite Packing No Lubrication. Assembled Dry. Oxygen Cleaned MPTFE Seats and Graphite Packing (Fire Safe) Cleaned For Industrial Gases Drilled and Tapped Purge Port with Plugs 4” Extended Bonnet Spiral Wound Gaskets w/PTFE Filler Live Loaded 87A/88A Series (Lever) Live Loaded (Gear, Actuator) Multi-Seal (Super TFE) 87A/88A Series Flat Face Flanges Double Packed 4” Extended Bonnet Double Packed 4” Extended Bonnet with Monitoring Port Garlock EVSP Stem Packing w/Spiral Wound Graphite Gasket (Fire Safe by Design) PCTFE Stem Bearing Gear Operator with Standard Handwheel Gear Operator with Standard Handwheel & Locking Device Gear Operator with Oversize Handwheel Gear Operator with Oversize Handwheel & Locking Device Positive Material Identification With Test Certificate Tested to API Spec 6D

-24-35-38-49-57-65-67-69-70-73-76-77-80-82-90-9P-EP-KF-MG-MH-MJ-MK-MP-TC-TD-

Pressure/Temperature Ratings - Page M-32, Graph No. 47

ACTUATOR MOUNTING

DIMENSIONS PRODUCT NUMBER 87T-109-01 87T-100-01

SIZE

A

B

C

2.5” 3”

2.00

7.50

2.50

8.00

“Apollo” Flow Controls

D

E

F

G

H

I

J

K

L

M

3.50

5.61

8.41

3.51

6.24

8.41

0.80

3.31

4.08

1.949

0.974

0.750

0.477

5/16-18

2.50

27

0.80

3.94

4.71

1.949

0.974

0.750

0.477

5/16-18

3.00

34

industrial.apollovalves.com

N

Customer Service (704) 841-6000

WT.

D-111

87T-100 SERIES TITANIUM ASME CLASS 150 FLANGED STD. PORT BALL VALVE - 4” THRU 8” FOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3. STANDARD MATERIAL LIST

VARIATIONS AVAILABLE

PART 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22

MATERIAL

Body Retainer Ball Stem Packing Gland Stem Seals Seats Gland Screws Gland Plate Adapter Screw Handle Adapter Stem Bearing Stop Stop Screw Lock Plate Body Seal Grounding Spring Body Joint Stud Body Joint Nut Lockwasher Pipe Handle Internal Grounding Spring

ASTM B367-C3 ASTM B367-C3 ASTM B367-C3 or ASTM B348 GR 4 or 5 ASTM B348 GR 4 or 5 ASTM A276 Type 316 PTFE RPTFE ASTM A193 B8 Class 1 316 SS 18-8 SS 316 SS RPTFE ASTM A276 Type 316 316 SS 302 or 304 SS RPTFE SS ASTM A193 Grade B8M ASTM A194 Grade 8 302 or 304 SS Galvanized Steel (not Shown) Inconel x750

• • • •

87A - 316 SS 87H - Hastelloy 87N - Nickel 87S - 304L SS

OPTIONS AVAILABLE: (MORE INFORMATION IN SECTION J)

• Minimum quantities apply • To specify an option, replace the “01” standard suffix with the suffix of the option. • To specify multiple options, replace the “01” suffix with the desired suffixes in the numerical order shown below. NOTE: Not all suffixes can be combined together. (SUFFIX)

OPTION

-01 -14-21-

Standard Configuration Side Vented Ball (Uni-Directional) UHMWPE Seats Graphite packing, spiral wound graphite body seal, RPTFE bearing (API 607, 6th edition, ISO 10497:2010) PTFE Seats and Seals No Lubrication. Assembled Dry. Oxygen Cleaned MPTFE Seats and Graphite Packing (Fire Safe) Cleaned For Industrial Gases Drilled and Tapped Purge Ports with Plugs Extended Bonnet Spiral Wound Gaskets w/PTFE Filler Live Loaded (Lever) Live Loaded (Gear, Actuator) Multi-Seal (Super TFE) 87A/88A Series Flat Face Flanges Double Packed 4” Extended Bonnet Double Packed 4” Extended Bonnet with Monitoring Port Garlock EVSP Stem Packing w/Spiral Wound Graphite Gasket (Fire Safe by Design) PCTFE Stem Bearing Gear Operator with Standard Handwheel Gear Operator with Standard Handwheel & Locking Device Gear Operator with Oversize Handwheel Gear Operator with Oversize Handwheel & Locking Device Positive Material Identification With Test Certificate Tested to API Spec 6D

-24-35-49-57-65-67-69-70-73-76-77-80-82-90-9P-EP-KF-MG-MH-MJ-MK-MP-TC-TD-

Pressure/Temperature Ratings - Page M-32, Graph No. 47

ACTUATOR MOUNTING

DIMENSIONS PRODUCT NUMBER 87T-10A-01

D-112

SIZE

A

B

C

D

E

F

G

H

I

J

K

L

M

N

WT.

4”

3.00

9.00

4.18

8.80

3.88

0.50

4.75

5.95

2.840

1.420

1.250

0.725

3/8-16

4.00

73

87T-10C-01

6”

4.00

10.50

4.69

9.99

5.13

0.50

5.94

7.13

2.840

1.420

1.250

0.725

3/8-16

6.00

117

87T-10E-01

8”

6.00

18.00

9.00

13.73

7.00

1.00

7.75

9.48

4.596

2.298

2.000

1.375

3/4-10

8.00

310

Customer Service (704) 841-6000

www.apolloflowcontrols.com

“Apollo” Flow Controls

87T-100 SERIES TITANIUM ASME CLASS 150 FLANGED STD. PORT BALL VALVE - 10” FOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3. STANDARD MATERIAL LIST

VARIATIONS AVAILABLE

PART 1 2 3 4 5 6 7 8 9 10 11 12 13

• • • •

MATERIAL

Body Retainer Ball Stem Packing Gland Stem Seals Seats Gland Screws Gland Plate Stem Bearing Body Seal Body Joint Stud Body Joint Nut

ASTM B367-C3 ASTM B367-C3 ASTM A276 Type 316 or A351 CF8M ASTM B348 GR 4 or 5 ASTM A276 Type 316 PTFE RPTFE ASTM A193 B8 Class 1 316 SS RPTFE RPTFE ASTM A193 Grade B8M ASTM A194 Grade 8

87A - 316 SS 87H - Hastelloy 87N - Nickel 87S - 304L SS

OPTIONS AVAILABLE: (MORE INFORMATION IN SECTION J)

• Minimum quantities apply • To specify an option, replace the “01” standard suffix with the suffix of the option. • To specify multiple options, replace the “01” suffix with the desired suffixes in the numerical order shown below. NOTE: Not all suffixes can be combined together. (SUFFIX)

OPTION

-01 -14-21-

Standard Configuration Side Vented Ball (Uni-Directional) UHMWPE Seats Graphite packing, spiral wound graphite body seal, RPTFE bearing (API 607, 6th edition, ISO 10497:2010) PTFE Seats and Seals No Lubrication. Assembled Dry. Oxygen Cleaned MPTFE Seats and Graphite Packing (Fire Safe) Drilled and Tapped Purge Port with Plugs 4” Extended Bonnet Live Loaded 87A/88A Series (Gear, Actuator) Multi-Seal (Super TFE) Flat Face Flanges Double Packed 4” Extended Bonnet Double Packed 4” Extended Bonnet with Monitoring Port Garlock EVSP Stem Packing w/Spiral Wound Graphite Gasket (Fire Safe by Design) PCTFE Stem Bearing Gear Operator with Standard Handwheel Gear Operator with Standard Handwheel & Locking Device Gear Operator with Oversize Handwheel Gear Operator with Oversize Handwheel & Locking Device Positive Material Identification With Test Certificate Tested to API Spec 6D

-24-35-49-57-65-69-70-77-80-82-90-9P-EP-KF-MG-MH-MJ-MK-MP-TC-TD-

Pressure/Temperature Ratings - Page M-32, Graph No. 47

ACTUATOR MOUNTING

DIMENSIONS PRODUCT NUMBER 87T-10G-01

SIZE

A

B

C

D

E

F

G

H

I

J

K

L

M

WT.

10”

8.00

21.00

10.37

12.83

9.18

1.00

10.22

4.596

2.298

2.000

1.375

3/4-10

10.00

526

“Apollo” Flow Controls

industrial.apollovalves.com

Customer Service (704) 841-6000

D-113

87T-200 SERIES TITANIUM ASME CLASS 150 FLANGED FULL PORT BALL VALVE - 1/2” THRU 1” FOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3. STANDARD MATERIAL LIST 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

VARIATIONS AVAILABLE

PART (1/2” & 3/4” VALVES)

MATERIAL

Body Retainer Ball Stem Packing Gland Stem Seals Seats Stem Nut Lever Stem Bearing Stop Body Seal Lockwasher Grounding Spring Internal Grounding Spring

ASTM B367-C3 ASTM B348 GR 4 or 5 ASTM B348 GR 4 or 5 ASTM B348 GR 4 or 5 ASTM A276 Type 316 PTFE RPTFE 300 Series Stainless Steel 300 Series Stainless Steel w/ Vinyl Grip RPTFE 300 Series Stainless Steel RPTFE 300 Series Stainless Steel ASTM A313 Stainless Steel Inconel x750

PART (1” VALVES) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18

• • • • •

OPTIONS AVAILABLE: (MORE INFORMATION IN SECTION J)

• Minimum quantities apply • To specify an option, replace the “01” standard suffix with the suffix of the option. • To specify multiple options, replace the “01” suffix with the desired suffixes in the numerical order shown below. NOTE: Not all suffixes can be combined together.

MATERIAL

Body Retainer Ball Stem Packing Gland Stem Seals Seats Gland Screws Gland Plate Stem Nut Lever Stem Bearing Stop Stop Screw Lock Plate Body Seal Lockwasher Grounding Spring Internal Grounding Spring

87A - 316 SS 87H - Hastelloy 87M - Monel 87N - Nickel 87S - 304L SS

(SUFFIX)

OPTION

-01 -04-14-15-21-

Standard Configuration 2.25” Stem Extension (Carbon Steel, Zinc Plated) Side Vented Ball (Uni-Directional) Wheel Handle, Steel UHMWPE Seats Graphite packing, spiral wound graphite body seal, RPTFE bearing (API 607, 6th edition, ISO 10497:2010) PTFE Seats and Seals PEEK Seats and Graphite Packing No Lubrication. Assembled Dry. Oxygen Cleaned MPTFE Seats and Graphite Packing (Fire Safe) Drilled and Tapped Purge Port with Plugs 4” Extended Bonnet Spiral Wound Gaskets w/PTFE Filler Live Loaded (Lever) Live Loaded (Gear, Actuator) Multi-Seal (Super TFE) Flat Face Flanges Double Packed 4” Extended Bonnet Double Packed 4” Extended Bonnet with Monitoring Port Garlock EVSP Stem Packing w/Spiral Wound Graphite Gasket (Fire Safe by Design) PCTFE Stem Bearing Positive Material Identification With Test Certificate Tested to API Spec 6D

-24-

ASTM B367-C3 ASTM B348 GR 4 or 5 ASTM A276 Type 316 ASTM A276 Type 316 ASTM A276 Type 316 PTFE RPTFE ASTM A193 B8 Class 1 302 or 304 SS 316 SS 302 or 304 with Vinyl Grip RPTFE ASTM A276 Type 316 18-8 SS 302 or 304 SS RPTFE 302 or 304 SS SS Inconel x750

-35-38-49-57-65-69-70-73-76-77-80-82-90-9P-EP-KF-MP-TC-TD-

Pressure/Temperature Ratings - Page M-32, Graph No. 47

1” VALVE

1/2” & 3/4” VALVES

DIMENSIONS PRODUCT NUMBER 87T-203-01

D-114

SIZE

A

B

C

D

E

F

G

H

I

J

K

L

M

WT.

1/2”

0.50

4.25

2.06

3.31

5.11

0.30

1.09

1.41

1.00

0.500

0.375

0.245

10-24

5

87T-204-01

3/4”

0.75

4.62

2.18

3.89

5.53

0.36

1.65

1.99

1.392

0.696

0.500

0.287

1/4-20

6

87T-205-01

1”

1.00

5.00

2.32

4.62

6.53

0.47

1.62

2.15

1.392

0.696

0.500

0.287

1/4-20

7

Customer Service (704) 841-6000

www.apolloflowcontrols.com

“Apollo” Flow Controls

87T-200 SERIES TITANIUM ASME CLASS 150 FLANGED FULL PORT BALL VALVE - 1.5” THRU 2.5” FOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3. STANDARD MATERIAL LIST 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20

VARIATIONS AVAILABLE

PART

MATERIAL

Body Retainer Ball Stem Packing Gland Stem Seals Seats Gland Screws Gland Plate Adapter Screw Lever Stem Bearing Stop Stop Screw Lock Plate Body Seal Grounding Spring Body Joint Stud Body Joint Nut Lockwasher Internal Grounding Spring

ASTM B367-C3 ASTM B367-C3 ASTM B367-C3 or ASTM B348 GR 4 or 5 ASTM B348 GR 4 or 5 ASTM A276 Type 316 PTFE RPTFE ASTM A193 B8 Class 1 316 SS 18-8 SS 316 SS RPTFE ASTM A276 Type 316 316 SS 302 or 304 SS RPTFE SS ASTM A193 Grade B8M ASTM A194 Grade 8 302 or 304 SS Inconel x750

• • • • •

87A - 316 SS 87H - Hastelloy 87M - Monel 87N - Nickel 87S - 304L SS

OPTIONS AVAILABLE: (MORE INFORMATION IN SECTION J)

• Minimum quantities apply • To specify an option, replace the “01” standard suffix with the suffix of the option. • To specify multiple options, replace the “01” suffix with the desired suffixes in the numerical order shown below. NOTE: Not all suffixes can be combined together. (SUFFIX)

-01 -04-14-21-24-35-38-49-57-65-69-70-73-76-77-80-82-MG-90-9P-EP-KF-MH-MJ-MK-MP-TC-TD-

OPTION

Standard Configuration 2.25” Stem Extension (Carbon Steel, Zinc Plated) (up to 2.5”) Side Vented Ball (Uni-Directional) UHMWPE Seats Graphite packing, spiral wound graphite body seal, RPTFE bearing (API 607, 6th edition, ISO 10497:2010) PTFE Seats and Seals PEEK Seats and Graphite Packing No Lubrication. Assembled Dry. Oxygen Cleaned MPTFE Seats and Graphite Packing (Fire Safe) Drilled and Tapped Purge Ports with Plugs 4” Extended Bonnet Spiral Wound Gaskets w/PTFE Filler Live Loaded (Lever) Live Loaded (Gear, Actuator) Multi-Seal (Super TFE) Flat Face Flanges Gear Operator with Standard Handwheel Double Packed 4” Extended Bonnet Double Packed 4” Extended Bonnet with Monitoring Port Garlock EVSP Stem Packing w/Spiral Wound Graphite Gasket (Fire Safe by Design) PCTFE Stem Bearing Gear Operator with Standard Handwheel & Locking Device Gear Operator with Oversize Handwheel Gear Operator with Oversize Handwheel & Locking Device Positive Material Identification With Test Certificate Tested to API Spec 6D

Pressure/Temperature Ratings - Page M-32, Graph No. 47

ACTUATOR MOUNTING

DIMENSIONS PRODUCT NUMBER 87T-207-01

SIZE

A

B

C

D

E

F

G

H

I

J

K

L

M

WT.

1.5”

1.50

6.50

3.00

4.62

6.65

0.72

2.41

3.09

1.949

0.974

0.625

0.412

5/16-18

14

87T-208-01

2”

2.00

7.00

3.04

5.61

8.41

0.80

3.31

4.08

1.949

0.974

0.750

0.477

5/16-18

25

87T-209-01

2.5”

2.50

7.50

3.34

6.24

8.41

0.80

3.94

4.71

1.949

0.974

0.750

0.477

5/16-18

30

“Apollo” Flow Controls

industrial.apollovalves.com

Customer Service (704) 841-6000

D-115

87T-200 SERIES TITANIUM ASME CLASS 150 FLANGED FULL PORT BALL VALVE - 3” THRU 6” FOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3. STANDARD MATERIAL LIST 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20

VARIATIONS AVAILABLE

PART

MATERIAL

Body Retainer Ball Stem Packing Gland Stem Seals Seats Gland Screws Gland Plate Adapter Screw Handle Adapter Stem Bearing Stop Stop Screw Lock Plate Body Seal Grounding Spring Body Joint Stud Body Joint Nut Pipe Handle Internal Grounding Spring

ASTM B367-C3 ASTM B367-C3 ASTM B367-C3 or ASTM B348 GR 4 or 5 ASTM B348 GR 4 or 5 ASTM A276 Type 316 PTFE RPTFE ASTM A193 B8 Class 1 316 SS 18-8 SS 316 with Vinyl Grip RPTFE ASTM A276 Type 316 316 SS 302 or 304 SS RPTFE SS ASTM A193 Grade B8M ASTM A194 Grade 8 Galvanized Steel (not shown) Inconel x750

• • • •

87A - 316 SS 87H - Hastelloy 87N - Nickel 87S - 304L SS

OPTIONS AVAILABLE: (MORE INFORMATION IN SECTION J)

• Minimum quantities apply • To specify an option, replace the “01” standard suffix with the suffix of the option • To specify multiple options, replace the “01” suffix with the desired suffixes in the numerical order shown below. NOTE: Not all suffixes can be combined together. (SUFFIX)

OPTION

-01 -14-21-

Standard Configuration Side Vented Ball (Uni-Directional) UHMWPE Seats Graphite packing,spiral wound graphite body seal, RPTFE bearing (API 607, 6th edition, ISO 10497:2010) PTFE Seats and Seals PEEK Seats and Graphite Packing No Lubrication. Assembled Dry Oxygen Cleaned MPTFE Seats and Graphite Packing (Fire Safe) Drilled and Tapped Purge Ports with Plugs 4” Extended Bonnet Spiral Wound Gaskets w/ PTFE Filler Live Loaded (Lever) Live Loaded (Gear, Actuator) Multi-Seal (Super TFE) Flat Face Flanges Double Packed 4” Extended Bonnet Double Packed 4” Extended Bonnet with Monitoring Port Garlock EVSP Stem Packing w/ Spiral Wound Graphite Gasket (Fire Safe by Design) PCTFE Stem Bearing Gear Operator with Standard Handwheel Gear Operator with Standard Handwheel & Locking Device Gear Operator with Oversize Handwheel Gear Operator with Oversize Handwheel & Locking Device Positive Material Identification With Test Certificate Tested to API Spec 6D

-24-35-38-49-57-65-69-70-73-76-77-80-82-90-9P-EP-KF-MG-MH-MJ-MK-MP-TC-TD-

Pressure/Temperature Ratings - Page M-32, Graph No. 47

ACTUATOR MOUNTING

DIMENSIONS PRODUCT NUMBER 87T-200-01

D-116

SIZE

A

B

C

D

E

F

G

H

I

J

K

L

M

WT. 60

3”

3.00

8.00

3.68

8.80

3.88

0.50

4.75

5.95

2.840

1.420

1.250

0.725

3/8-16

87T-20A-01

4”

4.00

9.00

3.94

9.99

5.13

0.50

5.94

7.13

2.840

1.420

1.250

0.725

3/8-16

91

87T-20C-01

6”

6.00

15.50

7.19

13.73

7.00

1.00

7.75

9.48

4.596

2.298

2.000

1.375

3/4-10

248

Customer Service (704) 841-6000

www.apolloflowcontrols.com

“Apollo” Flow Controls

87T-200 SERIES TITANIUM ASME CLASS 150 FLANGED FULL PORT BALL VALVE - 8” THRU 12” FOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3. STANDARD MATERIAL LIST 1 2 3 4 5 6 7 8 9 10 11 12 13

VARIATIONS AVAILABLE

PART

MATERIAL

Body Retainer Ball Stem Packing Gland Stem Seals Seats Gland Screws Gland Plate Stem Bearing Body Seal Body Joint Stud Body Joint Nut Internal Grounding Spring

ASTM B367-C3 ASTM B367-C3 ASTM B367-C3 or ASTM B348 GR 4 or 5 ASTM B348 GR 4 or 5 ASTM A276 Type 316 PTFE RPTFE ASTM A193 B8 Class 1 316 SS RPTFE RPTFE ASTM A193 Grade B8M ASTM A194 Grade 8 Inconel x750

• • • •

87A - 316 SS 87H - Hastelloy 87N - Nickel 87S - 304L SS

OPTIONS AVAILABLE: (MORE INFORMATION IN SECTION J)

• Minimum quantities apply • To specify an option, replace the “01” standard suffix with the suffix of the option. • To specify multiple options, replace the “01” suffix with the desired suffixes in the numerical order shown below. NOTE: Not all suffixes can be combined together. (SUFFIX)

OPTION

-01 -14-21-

Standard Configuration Side Vented Ball (Uni-Directional) UHMWPE Seats Graphite packing, spiral wound graphite body seal, RPTFE bearing (API 607, 6th edition, ISO 10497:2010) PTFE Seats and Seals No Lubrication. Assembled Dry. Oxygen Cleaned MPTFE Seats and Graphite Packing (Fire Safe) Drilled and Tapped Purge Ports with Plugs 4” Extended Bonnet (8” Only) Live Loaded (Gear, Actuator) Multi-Seal (Super TFE) Flat Face Flanges Double Packed 4” Extended Bonnet Double Packed 4” Extended Bonnet with Monitoring Port Garlock EVSP Stem Packing w/Spiral Wound Graphite Gasket (Fire Safe by Design) PCTFE Stem Bearing Gear Operator with Standard Handwheel Gear Operator with Standard Handwheel & Locking Device Gear Operator with Oversize Handwheel Gear Operator with Oversize Handwheel & Locking Device Positive Material Identification With Test Certificate Tested to API Spec 6D

-24-35-49-57-65-69-70-77-80-82-90-9P-EP-KF-MG-MH-MJ-MK-MP-TC-TD-

ACTUATOR MOUNTING

Pressure/Temperature Ratings - Page M-32, Graph No. 47

10” & 12”

8”

DIMENSIONS PRODUCT NUMBER 87T-20E-01

SIZE

A

B

C

D

E

F

G

8”

8.00

18.00

8.88

12.83

9.18

1.00

10.22

87T-20G-01

10”

10.00

21.00

10.26

18.57

11.33

2.31

12.80

87T-20H-01

12”

12.00

24.00

12.09

20.31

13.40

2.31

14.92

“Apollo” Flow Controls

industrial.apollovalves.com

Customer Service (704) 841-6000

D-117

87T-700 SERIES TITANIUM ASME CLASS 300 FLANGED STD. PORT BALL VALVE - 1.5” THRU 2” FOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3. STANDARD MATERIAL LIST

VARIATIONS AVAILABLE

PART 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18

• • • • •

MATERIAL

Body Retainer Ball Stem Packing Gland Stem Seals Seats Gland Screws Gland Plate Stem Nut Lever Stem Bearing Stop Stop Screw Lock Plate Body Seal Lockwasher Grounding Spring Internal Grounding Spring

ASTM B367-C3 ASTM B348 GR 4 or 5 ASTM B348 GR 4 or 5 ASTM B348 GR 4 or 5 ASTM A276 Type 316 PTFE RPTFE ASTM A193 B8 Class 1 302 & 304 SS 316 SS 302 & 304 SS with Vinyl Grip RPTFE ASTM A276 Type 316 18-8 SS 302 or 304 SS RPTFE 302 or 304 SS SS Inconel x750

87A - 316 SS 87H - Hastelloy 87M - Monel 87N - Nickel 87S - 304L SS

OPTIONS AVAILABLE: (MORE INFORMATION IN SECTION J)

• Minimum quantities apply • To specify an option, replace the “01” standard suffix with the suffix of the option. • To specify multiple options, replace the “01” suffix with the desired suffixes in the numerical order shown below. NOTE: Not all suffixes can be combined together. (SUFFIX)

OPTION

-01 -04-14-15-21-

Standard Configuration 2.25” Stem Extension (Carbon Steel, Zinc Plated) Side Vented Ball (See Page J-2) Wheel Handle, Steel UHMWPE Seats Graphite packing, spiral wound graphite body seal, RPTFE bearing (API 607, 6th edition, ISO 10497:2010) PTFE Seats and Seals PEEK Seats and Graphite Packing No Lubrication. Assembled Dry. Oxygen Cleaned MPTFE Seats and Graphite Packing (Fire Safe) Drilled and Tapped Purge Ports with Plugs 4” Extended Bonnet Spiral Wound Gaskets w/PTFE Filler Live Loaded (Lever) Live Loaded (Gear, Actuator) Multi-Seal (Super TFE) Flat Face Flanges Double Packed 4” Extended Bonnet Double Packed 4” Extended Bonnet with Monitoring Port Garlock EVSP Stem Packing w/Spiral Wound Graphite Gasket (Fire Safe by Design) PCTFE Stem Bearing Positive Material Identification With Test Certificate Tested to API Spec 6D

-24-35-38-49-57-65-69-70-73-76-77-80-82-90-9P-EP-KF-MP-TC-TD-

Pressure/Temperature Ratings - Page M-32, Graph No. 48

ACTUATOR MOUNTING

DIMENSIONS PRODUCT NUMBER 87T-707-01A 87T-708-01

D-118

SIZE

A

B

C

D

E

F

G

H

I

J

K

L

M

N

WT.

1.5”

1.25

7.50

4.50

4.85

6.53

0.47

1.85

2.38

1.392

0.696

0.500

0.287

1/4-20

1.50

15.7

2”

1.50

8.50

5.19

4.62

6.65

0.72

2.41

3.09

1.949

0.974

0.625

0.412

5/16-18

2.00

24.0

Customer Service (704) 841-6000

www.apolloflowcontrols.com

“Apollo” Flow Controls

87T-700 SERIES TITANIUM ASME CLASS 300 FLANGED STD. PORT BALL VALVE - 2.5” THRU 3” FOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3. STANDARD MATERIAL LIST VARIATIONS AVAILABLE 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20

PART

MATERIAL

Body Retainer Ball Stem Packing Gland Stem Seals Seats Gland Screws Gland Plate Stem Nut Lever Stem Bearing Stop Stop Screw Lock Plate Body Seal Grounding Spring Body Joint Stud Body Joint Nut Lockwasher Internal Grounding Spring

ASTM B367-C3 ASTM B367-C3 ASTM B367-C3 or ASTM B348 GR 4 or 5 ASTM B348 GR 4 or 5 ASTM A276 Type 316 PTFE RPTFE ASTM A193 B8 Class 1 316 SS 18-8 SS 316 with Vinyl Grip RPTFE ASTM A276 Type 316 316 SS 302 or 304 SS RPTFE SS ASTM A193 Grade B8M ASTM A194 Grade 8 302 or 304 SS Inconel x750

• • • •

87A - 316 SS 87H - Hastelloy 87N - Nickel 87S - 304L SS

OPTIONS AVAILABLE: (MORE INFORMATION IN SECTION J)

• Minimum quantities apply • To specify an option, replace the “01” standard suffix with the suffix of the option. • To specify multiple options, replace the “01” suffix with the desired suffixes in the numerical order shown below. NOTE: Not all suffixes can be combined together. (SUFFIX)

-01 -04-14-21-24-35-38-49-57-65-69-70-73-76-77-80-82-90-9P-EP-KF-MG-MH-MJ-MK-MP-TC-TD-

OPTION

Standard Configuration 2.25” Stem Extension (Carbon Steel, Zinc Plated) (2.5” only) Side Vented Ball (Uni-Directional) UHMWPE Seats Graphite packing, spiral wound graphite body seal, RPTFE bearing (API 607, 6th edition, ISO 10497:2010) PTFE Seats and Seals PEEK Seats and Graphite Packing No Lubrication. Assembled Dry. Oxygen Cleaned MPTFE Seats and Graphite Packing (Fire Safe) Drilled and Tapped Purge Ports with Plugs 4” Extended Bonnet Spiral Wound Gaskets w/PTFE Filler Live Loaded (Lever) Live Loaded (Gear, Actuator) Multi-Seal (Super TFE) Flat Face Flanges Double Packed 4” Extended Bonnet Double Packed 4” Extended Bonnet with Monitoring Port Garlock EVSP Stem Packing w/Spiral Wound Graphite Gasket (Fire Safe by Design) PCTFE Stem Bearing Gear Operator with Standard Handwheel Gear Operator with Standard Handwheel & Locking Device Gear Operator with Oversize Handwheel Gear Operator with Oversize Handwheel & Locking Device Positive Material Identification With Test Certificate Tested to API Spec 6D

Pressure/Temperature Ratings - Page M-32, Graph No. 48

ACTUATOR MOUNTING

DIMENSIONS PRODUCT NUMBER 87T-709-01 87T-700-01

SIZE

A

B

2.5”

2.00

9.50

3”

2.50

11.12

“Apollo” Flow Controls

C

D

E

F

G

H

I

J

K

L

M

4.75

5.61

8.41

5.56

6.24

8.41

0.80

3.31

4.08

1.949

0.974

0.750

0.477

0.80

3.94

4.71

1.949

0.974

0.750

0.477

industrial.apollovalves.com

N

WT.

5/16-18

2.50

39

5/16-18

3.00

55

Customer Service (704) 841-6000

D-119

87T-700 SERIES TITANIUM ASME CLASS 300 FLANGED STD. PORT BALL VALVE - 4” THRU 8” FOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3. STANDARD MATERIAL LIST VARIATIONS AVAILABLE 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21

PART

MATERIAL

Body Retainer Ball Stem Packing Gland Stem Seals Seats Gland Screws Gland Plate Adapter Screw Handle Adapter Stem Bearing Stop Stop Screw Lock Plate Body Seal Grounding Spring Body Joint Stud Body Joint Nut Adapter Screw Pipe Handle Internal Grounding Spring

ASTM B367-C3 ASTM B348 GR 4 or 5 ASTM B367-C3 or ASTM B348 GR 4 or 5 ASTM B348 GR 4 or 5 ASTM A276 Type 316 PTFE RPTFE ASTM A193 B8 Class 1 316 SS 18-8 SS 316 SS RPTFE ASTM A276 Type 316 316 SS 302 or 304 SS RPTFE SS ASTM A193 Grade B8M ASTM A194 Grade 8 18-8 SS Galvanized Steel (not shown) Inconel x750

• • • •

87A - 316 SS 87H - Hastelloy 87N - Nickel 87S - 304L SS

OPTIONS AVAILABLE: (MORE INFORMATION IN SECTION J)

• Minimum quantities apply • To specify an option, replace the “01” standard suffix with the suffix of the option. • To specify multiple options, replace the “01” suffix with the desired suffixes in the numerical order shown below. NOTE: Not all suffixes can be combined together. (SUFFIX)

OPTION

-01 -14-21-

Standard Configuration Side Vented Ball (Uni-Directional) UHMWPE Seats Graphite packing, spiral wound graphite body seal, RPTFE bearing (API 607, 6th edition, ISO 10497:2010) PTFE Seats and Seals No Lubrication. Assembled Dry. Oxygen Cleaned MPTFE Seats and Graphite Packing (Fire Safe) Drilled and Tapped Purge Ports with Plugs 4” Extended Bonnet Spiral Wound Gaskets w/PTFE Filler Live Loaded (Lever) Live Loaded (Gear, Actuator) Multi-Seal (Super TFE) Flat Face Flanges Double Packed 4” Extended Bonnet Double Packed 4” Extended Bonnet with Monitoring Port Garlock EVSP Stem Packing w/Spiral Wound Graphite Gasket (Fire Safe by Design) PCTFE Stem Bearing Gear Operator with Standard Handwheel Gear Operator with Standard Handwheel & Locking Device Gear Operator with Oversize Handwheel Gear Operator with Oversize Handwheel & Locking Device Positive Material Identification With Test Certificate Tested to API Spec 6D

-24-35-49-57-65-69-70-73-76-77-80-82-90-9P-EP-KF-MG-MH-MJ-MK-MP-TC-TD-

Pressure/Temperature Ratings - Page M-32, Graph No. 48

ACTUATOR MOUNTING

DIMENSIONS PRODUCT NUMBER 87T-70A-01

D-120

SIZE

A

B

C

D

E

F

G

H

I

J

K

L

M

N

WT.

4”

3.00

12.00

5.68

8.80

4.06

0.50

4.75

5.95

2.840

1.420

1.250

0.725

3/8-16

4.00

95

87T-70C-01

6”

4.00

15.88

7.38

9.99

5.25

0.50

5.94

7.13

2.840

1.420

1.250

0.725

3/8-16

6.00

187

87T-70E-01

8”

6.00

19.75

9.00

13.73

7.30

1.00

7.75

9.48

4.596

2.298

2.000

1.375

3/4-10

8.00

400

Customer Service (704) 841-6000

www.apolloflowcontrols.com

“Apollo” Flow Controls

87T-700 SERIES TITANIUM ASME CLASS 300 FLANGED STD. PORT BALL VALVE - 10” FOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3. STANDARD MATERIAL LIST 1 2 3 4 5 6 7 8 9 10 11 12 13

VARIATIONS AVAILABLE

PART

MATERIAL

Body Retainer Ball Stem Packing Gland Stem Seals Seats Gland Screws Gland Plate Stem Bearing Body Seal Body Joint Stud Body Joint Nut Internal Grounding Spring

ASTM B367-C3 ASTM B367-C3 ASTM B367-C3 or ASTM B348 GR 4 or 5 ASTM B348 GR 4 or 5 ASTM A276 Type 316 PTFE RPTFE ASTM A193 B8 Class 1 316 SS RPTFE RPTFE ASTM A193 Grade B8M ASTM A194 Grade 8 Inconel x750

• • • •

87A - 316 SS 87H - Hastelloy 87N - Nickel 87S - 304L SS

OPTIONS AVAILABLE: (MORE INFORMATION IN SECTION J)

• Minimum quantities apply • To specify an option, replace the “01” standard suffix with the suffix of the option. • To specify multiple options, replace the “01” suffix with the desired suffixes in the numerical order shown below. NOTE: Not all suffixes can be combined together. (SUFFIX)

OPTION

-01 -14-21-

Standard Configuration (Less Gear Operator) Side Vented Ball (See Page J2) UHMWPE Seats Graphite packing, spiral wound graphite body seal, RPTFE bearing (API 607, 6th edition, ISO 10497:2010) PTFE Seats and Seals No Lubrication. Assembled Dry. Oxygen Cleaned MPTFE Seats and Graphite Packing (Fire Safe) Drilled and Tapped Purge Ports with Plugs 4” Extended Bonnet Live Loaded 87A/88A Series (Gear, Actuator) Multi-Seal (Super TFE) 87A/88A Series Flat Face Flanges Double Packed 4” Extended Bonnet Double Packed 4” Extended Bonnet with Monitoring Port Garlock EVSP Stem Packing w/Spiral Wound Graphite Gasket (Fire Safe by Design) PCTFE Stem Bearing Gear Operator with Standard Handwheel Gear Operator with Standard Handwheel & Locking Device Gear Operator with Oversize Handwheel Gear Operator with Oversize Handwheel & Locking Device Positive Material Identification With Test Certificate Tested to API Spec 6D

-24-35-49-57-65-69-70-77-80-82-90-9P-EP-KF-MG-MH-MJ-MK-MP-TC-TD-

Pressure/Temperature Ratings - Page M-32, Graph No. 48

ACTUATOR MOUNTING

DIMENSIONS PRODUCT NUMBER 87T-70G-01

SIZE

A

B

C

D

E

F

G

H

I

J

K

L

M

10”

8.00

22.38

10.69

12.83

9.56

1.00

10.22

4.596

2.298

2.000

1.375

3/4-10

10.00

“Apollo” Flow Controls

industrial.apollovalves.com

Customer Service (704) 841-6000

D-121

87T-900 SERIES TITANIUM ASME CLASS 300 FLANGED FULL PORT BALL VALVE - 1/2” THRU 1” FOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3. STANDARD MATERIAL LIST 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

VARIATIONS AVAILABLE

PART (1/2” & 3/4” VALVES)

MATERIAL

Body Retainer Ball Stem Packing Gland Stem Seals Seats Stem Nut Lever Stem Bearing Stop Body Seal Lockwasher Grounding Spring Internal Grounding Spring

ASTM B367-C3 ASTM B348 GR 4 or 5 ASTM B348 GR 4 or 5 ASTM B348 GR 4 or 5 ASTM A276 Type 316 PTFE RPTFE 300 Series Stainless Steel 300 Series Stainless Steel w/ Vinyl Grip RPTFE 300 Series Stainless Steel RPTFE 300 Series Stainless Steel ASTM A313 Stainless Steel Inconel x750

PART (1” VALVES) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18

• • • • •

OPTIONS AVAILABLE: (MORE INFORMATION IN SECTION J)

• Minimum quantities apply • To specify an option, replace the “01” standard suffix with the suffix of the option. • To specify multiple options, replace the “01” suffix with the desired suffixes in the numerical order shown below. NOTE: Not all suffixes can be combined together.

MATERIAL

Body Retainer Ball Stem Packing Gland Stem Seals Seats Gland Screws Gland Plate Stem Nut Lever Stem Bearing Stop Stop Screw Lock Plate Body Seal Lockwasher Grounding Spring Internal Grounding Spring

87A - 316 SS 87H - Hastelloy 87M - Monel 87N - Nickel 87S - 304L SS

ASTM B367-C3 ASTM B348 GR 4 or 5 ASTM B348 GR 4 or 5 ASTM B348 GR 4 or 5 ASTM A276 Type 316 PTFE RPTFE ASTM A193 B8 Class 1 302 or 304 SS 316 SS 302 or 304 with Vinyl Grip RPTFE ASTM A276 Type 316 18-8 SS 302 or 304 SS RPTFE 302 or 304 SS SS Inconel x750

(SUFFIX)

OPTION

-01 -04-14-15-21-

Standard Configuration 2.25” Stem Extension (Carbon Steel, Zinc Plated) Side Vented Ball (Uni-Directional) Wheel Handle, Steel UHMWPE Seats Graphite packing, spiral wound graphite body seal, RPTFE bearing (API 607, 6th edition, ISO 10497:2010) PTFE Seats and Seals PEEK Seats and Graphite Packing No Lubrication. Assembled Dry. Oxygen Cleaned MPTFE Seats and Graphite Packing (Fire Safe) Drilled and Tapped Purge Port with Plugs 4” Extended Bonnet Spiral Wound Gaskets w/PTFE Filler Live Loaded (Lever) Live Loaded (Gear, Actuator) Multi-Seal (Super TFE) Flat Face Flanges Double Packed 4” Extended Bonnet Double Packed 4” Extended Bonnet with Monitoring Port Garlock EVSP Stem Packing w/Spiral Wound Graphite Gasket (Fire Safe by Design) PCTFE Stem Bearing Positive Material Identification With Test Certificate Tested to API Spec 6D

-24-35-38-49-57-65-69-70-73-76-77-80-82-90-9P-EP-KF-MP-TC-TD-

Pressure/Temperature Ratings - Page M-32, Graph No. 48

1/2” & 3/4” VALVES

1” VALVE

DIMENSIONS PRODUCT NUMBER 87T-903-01

D-122

SIZE

A

B

C

D

E

F

G

H

I

J

K

L

M

WT. 6

1/2”

0.50

5.50

3.31

3.31

5.11

0.30

1.09

1.38

1.000

0.500

0.375

0.245

10-24

87T-904-01

3/4”

0.75

6.00

3.56

3.89

5.53

0.36

1.65

1.99

1.392

0.696

0.500

0.287

1/4-20

9

87T-905-01

1”

1.00

6.50

3.82

4.62

6.53

0.47

1.62

2.15

1.392

0.696

0.500

0.287

1/4-20

11

Customer Service (704) 841-6000

www.apolloflowcontrols.com

“Apollo” Flow Controls

87T-900 SERIES TITNAIUM ASME CLASS 300 FLANGED FULL PORT BALL VALVE - 1.5” THRU 2.5” FOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3. STANDARD MATERIAL LIST 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20

VARIATIONS AVAILABLE

PART

MATERIAL

Body Retainer Ball Stem Packing Gland Stem Seals Seats Gland Screws Gland Plate Stem Nut Lever Stem Bearing Stop Stop Screw Lock Plate Body Seal Grounding Spring Body Joint Stud Body Joint Nut Lockwasher Internal Grounding Spring

ASTM B367-C3 ASTM B367-C3 ASTM B367-C3 or ASTM B348 GR 4 or 5 ASTM B348 GR 4 or 5 ASTM A276 Type 316 PTFE RPTFE ASTM A193 B8 Class 1 316 SS 18-8 SS 316 SS RPTFE ASTM A276 Type 316 316 SS 302 or 304 SS RPTFE SS ASTM A193 Grade B8M ASTM A194 Grade 8 302 or 304 SS Inconel x750

• • • • •

87A - 316 SS 87H - Hastelloy 87M - Monel 87N - Nickel 87S - 304L SS

OPTIONS AVAILABLE: (MORE INFORMATION IN SECTION J)

• Minimum quantities apply • To specify an option, replace the “01” standard suffix with the suffix of the option. • To specify multiple options, replace the “01” suffix with the desired suffixes in the numerical order shown below. NOTE: Not all suffixes can be combined together. (SUFFIX)

OPTION

-01 -04-14-21-

Standard Configuration 2.25” Stem Extension (Carbon Steel, Zinc Plated) Side Vented Ball (Uni-Directional) UHMWPE Seats Graphite packing, spiral wound graphite body seal, RPTFE bearing (API 607, 6th edition, ISO 10497:2010) PTFE Seats and Seals PEEK Seats and Graphite Packing (3” Only) No Lubrication. Assembled Dry. Oxygen Cleaned MPTFE Seats and Graphite Packing (Fire Safe) Drilled and Tapped Purge Ports with Plugs 4” Extended Bonnet Spiral Wound Gaskets w/PTFE Filler Live Loaded (Lever) Live Loaded (Gear, Actuator) Multi-Seal (Super TFE) Flat Face Flanges Double Packed 4” Extended Bonnet Double Packed 4” Extended Bonnet with Monitoring Port Garlock EVSP Stem Packing w/Spiral Wound Graphite Gasket (Fire Safe by Design) PCTFE Stem Bearing Gear Operator with Standard Handwheel Gear Operator with Standard Handwheel & Locking Device Gear Operator with Oversize Handwheel Gear Operator with Oversize Handwheel & Locking Device Positive Material Identification With Test Certificate Tested to API Spec 6D

-24-35-38-49-57-65-69-70-73-76-77-80-82-90-9P-EP-KF-MG-MH-MJ-MK-MP-TC-TD-

Pressure/Temperature Ratings - Page M-32, Graph No. 48

ACTUATOR MOUNTING

DIMENSIONS PRODUCT NUMBER 87T-907-01

SIZE

A

B

C

D

E

F

G

H

I

J

K

L

M

1.5”

1.50

7.50

3.50

4.62

6.65

0.72

2.41

3.09

1.949

0.974

0.625

0.412

5/16-18

21

87T-908-01

2”

2.00

8.50

4.00

5.61

8.41

0.80

3.31

4.08

1.949

0.974

0.750

0.477

5/16-18

37

87T-909-01

2.5”

2.50

9.50

4.44

6.24

8.41

0.80

3.94

4.71

1.949

0.974

0.750

0.477

5/16-18

57

“Apollo” Flow Controls

industrial.apollovalves.com

WT.

Customer Service (704) 841-6000

D-123

87T-900 SERIES TITANIUM ASME CLASS 300 FLANGED FULL PORT BALL VALVE - 3” THRU 6” FOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3. STANDARD MATERIAL LIST 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20

VARIATIONS AVAILABLE

PART

MATERIAL

Body Retainer Ball Stem Packing Gland Stem Seals Seats Gland Screws Gland Plate Adapter Screw Handle Adapter Stem Bearing Stop Stop Screw Lock Plate Body Seal Grounding Spring Body Joint Stud Body Joint Nut Pipe Handle Internal Grounding Spring

ASTM B367-C3 ASTM B367-C3 ASTM B367-C3 or ASTM B348 GR 4 or 5 ASTM B348 GR 4 or 5 ASTM A276 Type 316 PTFE RPTFE ASTM A193 B8 Class 1 316 SS 18-8 SS 316 SS RPTFE ASTM A276 Type 316 316 SS 302 or 304 SS RPTFE SS ASTM A193 Grade B8M ASTM A194 Grade 8 Galvanized Steel (not shown) Inconel x750

• • • •

87A - 316 SS 87H - Hastelloy 87N - Nickel 87S - 304L SS

OPTIONS AVAILABLE: (MORE INFORMATION IN SECTION J)

• Minimum quantities apply • To specify an option, replace the “01” standard suffix with the suffix of the option. • To specify multiple options, replace the “01” suffix with the desired suffixes in the numerical order shown below. NOTE: Not all suffixes can be combined together. (SUFFIX)

OPTION

-01 -14-21-

Standard Configuration Side Vented Ball (Uni-Directional) UHMWPE Seats Graphite packing, spiral wound graphite body seal, RPTFE bearing (API 607, 6th edition, ISO 10497:2010) PTFE Seats and Seals PEEK Seats and Graphite Packing (3” Only) No Lubrication. Assembled Dry. Oxygen Cleaned MPTFE Seats and Graphite Packing (Fire Safe) Drilled and Tapped Purge Port with Plugs 4” Extended Bonnet Spiral Wound Gaskets w/PTFE Filler Live Loaded (Lever) Live Loaded (Gear, Actuator) Multi-Seal (Super TFE) Flat Face Flanges Double Packed 4” Extended Bonnet Double Packed 4” Extended Bonnet with Monitoring Port Garlock EVSP Stem Packing w/Spiral Wound Graphite Gasket (Fire Safe by Design) PCTFE Stem Bearing Gear Operator with Standard Handwheel Gear Operator with Standard Handwheel & Locking Device Gear Operator with Oversize Handwheel Gear Operator with Oversize Handwheel & Locking Device Positive Material Identification With Test Certificate Tested to API Spec 6D

-24-35-38-49-57-65-69-70-73-76-77-80-82-90-9P-EP-KF-MG-MH-MJ-MK-MP-TC-TD-

Pressure/Temperature Ratings - Page M-32, Graph No. 48

ACTUATOR MOUNTING

DIMENSIONS PRODUCT NUMBER 87T-900-01

SIZE

A

B

C

D

E

F

G

H

I

J

K

L

M

3”

3.00

11.12

5.24

8.80

4.06

0.50

4.75

5.95

2.840

1.420

1.250

0.725

3/8-16

78

87T-90A-01

4”

4.00

12.00

5.44

9.99

5.25

0.50

5.94

7.13

2.840

1.420

1.250

0.725

3/8-16

133

87T-90C-01

6”

6.00

15.88

6.82

13.73

7.30

1.00

7.75

9.48

4.596

2.298

2.000

1.375

3/4-10

329

D-124

Customer Service (704) 841-6000

www.apolloflowcontrols.com

WT.

“Apollo” Flow Controls

87T-900 SERIES TITANIUM ASME CLASS 300 FLANGED FULL PORT BALL VALVE - 8” THRU 12” FOR STANDARDS COMPLIANCE AND STANDARD FEATURES REFER TO PAGE D-3. STANDARD MATERIAL LIST 1 2 3 4 5 6 7 8 9 10 11 12 13

VARIATIONS AVAILABLE

PART

MATERIAL

Body Retainer Ball Stem Packing Gland Stem Seals Seats Gland Screws Gland Plate Stem Bearing Body Seal Body Joint Stud Body Joint Nut Internal Grounding Spring

ASTM B367-C3 ASTM B367-C3 ASTM B367-C3 or ASTM B348 GR 4 or 5 ASTM B348 GR 4 or 5 ASTM A276 Type 316 PTFE RPTFE ASTM A193 B8 Class 1 316 SS RPTFE RPTFE ASTM A193 Grade B8M ASTM A194 Grade 8 Inconel x750

• • • •

87A - 316 SS 87H - Hastelloy 87N - Nickel 87S - 304L SS

OPTIONS AVAILABLE: (MORE INFORMATION IN SECTION J)

• Minimum quantities apply • To specify an option, replace the “01” standard suffix with the suffix of the option. • To specify multiple options, replace the “01” suffix with the desired suffixes in the numerical order shown below. NOTE: Not all suffixes can be combined together. (SUFFIX)

OPTION

-01 -14-21-

Standard Configuration Side Vented Ball (Uni-Directional) UHMWPE Seats Graphite packing, spiral wound graphite body seal, RPTFE bearing (API 607, 6th edition, ISO 10497:2010) PTFE Seats and Seals No Lubrication. Assembled Dry. Oxygen Cleaned MPTFE Seats and Graphite Packing (Fire Safe) Drilled and Tapped Purge Ports with Plugs 4” Extended Bonnet (8” Only) Live Loaded (Gear, Actuator) Multi-Seal (Super TFE) Flat Face Flanges Double Packed 4” Extended Bonnet Double Packed 4” Extended Bonnet with Monitoring Port Garlock EVSP Stem Packing w/Spiral Wound Graphite Gasket (Fire Safe by Design) PCTFE Stem Bearing Gear Operator with Standard Handwheel Gear Operator with Standard Handwheel & Locking Device Gear Operator with Oversize Handwheel Gear Operator with Oversize Handwheel & Locking Device Positive Material Identification With Test Certificate Tested to API Spec 6D

-24-35-49-57-65-69-70-77-80-82-90-9P-EP-KF-MG-MH-MJ-MK-MP-TC-TD-

ACTUATOR MOUNTING

Pressure/Temperature Ratings - Page M-32, Graph No. 48

10” & 12”

8”

DIMENSIONS PRODUCT NUMBER 87T-90E-01

SIZE

A

B

C

D

E

F

G

8”

8.00

19.75

9.38

12.83

9.56

1.00

10.22

87T-90G-01

10”

10.00

22.38

10.95

18.57

11.33

2.31

12.80

87T-90H-01

12”

12.00

25.50

12.84

20.31

13.40

2.31

14.92

“Apollo” Flow Controls

industrial.apollovalves.com

Customer Service (704) 841-6000

D-125

SECTION D - ASME FLANGED BALL VALVES REVISIONS PAGE D5 thru D54

D55 thru D88

D89 thru D94 D95 thru D99

D100 thru D109

D-126

DATE

DESCRIPTION

04MAY17 12APR16 04MAY17

Added suffix “-CE” CE Marking Added suffix “-KF”. PCTFE stem bearing. Added suffix “-CE” CE Marking

29JUN16

Changed option suffix “-14” to Side Vented Ball (Uni-Directional). Not available with plated CS ball. Changed option suffix “-26” to Chlorine Service. Vented. Special Cleaning. Assembled dry. (for CS, Hastelloy and Ni-Cu valves. Ball must be Hastelloy or Ni-CU)

12APR16 04MAY17 12APR16

Added suffix “-KF”. PCTFE stem bearing. Added suffix “-CE” CE Marking Added suffix “-KF”. PCTFE stem bearing.

04MAY17

Added suffix “-CE” CE Marking Clarified the text under Options Available Header

04MAY17

Added suffix “-CE” CE Marking Clarified the text under Options Available Header

08MAR17

Removed “-MP” option.

29JUN16

Changed option suffix “-14” to Side Vented Ball (Uni-Directional). Not available with plated CS ball. Changed option suffix “-26” to Chlorine Service. Vented. Special Cleaning. Assembled dry. (for CS, Hastelloy and Ni-Cu valves. Ball must be Hastelloy or Ni-CU)

Customer Service (704) 841-6000

www.apolloflowcontrols.com

“Apollo” Flow Controls

Comments